ຄູ່ມືໂມດູນ ແລະ ຄູ່ມືຜູ້ໃຊ້

Mircom MGD-32 Master Graphic Driver Module ຄໍາແນະນໍາ

ວັນທີ 7 ມີນາ 2023

Mircom MGD-32 Master Graphic Driver Module Description MGD-32 ແມ່ນໂມດູນຕົວຂັບກຣາບຟິກ Master ທີ່ໃຫ້ວັດສະດຸປ້ອນການຄວບຄຸມທົ່ວໄປສຳລັບສະວິດຄວບຄຸມທົ່ວໄປ. ເຫຼົ່ານີ້ລວມມີ: ການຣີເຊັດລະບົບ, ຄວາມງຽບຂອງສັນຍານ, ການປິດການຊ່ວຍເສີມ, ການເຈາະໄຟ, Lamp Test Acknowledge and General…

ຍີ່ຫໍ້: Mircom

Mircom MIX-M500RAP Relay Control Module ຄູ່ມືຄໍາແນະນໍາ

ວັນທີ 7 ມີນາ 2023

ຄໍາແນະນໍາໃນການຕິດຕັ້ງແລະບໍາລຸງຮັກສາ 25 ຊ່ອງທາງແລກປ່ຽນ, Vaughan Ontario, L4K 5W3 ໂທລະສັບ: 905.660.4655; ແຟັກ: 905.660.4113 MIX-M500RAP Relay Control Module Specifications Normal Operating Voltage: 15 to 32 VDC Maximum Alarm Current: 6.5mA (LED on) Average Operating Current: 300 µA, 1 communication…

ຍີ່ຫໍ້: Mircom

ຄູ່ມືການສອນ MGC MIX-4045 Dual Relay Module

ວັນທີ 7 ມີນາ 2023

MGC MIX-4045 Dual Relay Module INSTALLATION AND MAINTENANCE INSTRUCTIONS MIX-4045 DUAL RELAY MODULE ABOUT THIS MANUAL This manual is included as a quick reference for installation. For fur-ther information on the use of this device with a FACP, please refer…

ຍີ່ຫໍ້: MGC

Mircom MIX-M501MAPA Monitor Module ຄູ່ມືການສອນ

ວັນທີ 7 ມີນາ 2023

Mircom MIX-M501MAPA Monitor Module Specifications Nominal Operating Voltage: 15-32 VDC Maximum Alarm Current: 600 uA Average Operating Current: 400 μA, 1 communication every 5 seconds, 47k EOL EOL Resistance: 47K Ohms Maximum IDC Wiring Resistance: 40 Ohms Maximum IDC Vol.tage:…

ຍີ່ຫໍ້: Mircom

Mircom MIX-M502MAPA Intelligent Monitor Module ຄູ່ມືຄໍາແນະນໍາ

ວັນທີ 7 ມີນາ 2023

25 Interchange Way, Vaughan Ontario, L4K 5W3 ໂທລະສັບ: 905.660.4655; ແຟັກ: 905.660.4113 MIX-M502MAPA Intelligent Monitor Module INSTALLATION AND MAINTENANCE ຄໍາແນະນໍາຂອງ MIX-M502MAPA Interface Module Specifications Normal Operating Voltage: 15 to 32 VDC Maximum Alarm Current: 5.1mA (LED on) Average Operating Current: 400µA,…

ຍີ່ຫໍ້: Mircom

ຄູ່ມືການຕິດຕັ້ງໂມດູນ Monitor Mircom MIX-M500MAP

ວັນທີ 7 ມີນາ 2023

Mircom MIX-M500MAP Monitor Module SPECIFICATIONS Normal Operating Voltage:                     15 to 32 VDC Maximum Alarm Current (LED on):      5.0mA (LED on) Average Operating Current:                  400 μA, 1 communication every 5 seconds, 47k…

ຍີ່ຫໍ້: Mircom

ຄູ່ມືຜູ້ໃຊ້ GRANBERG Sidelift 6400 Combi Kitchen Module

ວັນທີ 6 ມີນາ 2023

GRANBERG Sidelift 6400 Combi Kitchen Module User Manual Products Countertop lift system - ADA Kitchen Countertop lift system Granberg Sidelift 6400 Content Important safety instructions / Introduction ETL certification and declaration of conformity with EU directives Intended use Technical data…

ຍີ່ຫໍ້: GRANBERG

ຄູ່ມືຜູ້ໃຊ້ SUPERMICRO SuperBlade SBI-4119MG-X Blade Module

ວັນທີ 6 ມີນາ 2023

SUPERMICRO SuperBlade SBI-4119MG-X Blade Module User Guide SBI-4119MG-X Module Layout Item Description 1 CPU installed 2 M.2 NVMe storage module 3 DIMM slots (four) 4 Power and Logic connectors to backplane 5 GPU 6 PCI-E Module (Under GPU) 7 SATA…

ຍີ່ຫໍ້: SuperMicro

ຄູ່​ມື​ການ​ແນະ​ນໍາ Module Charger Battery ພາຍ​ໃນ ELECRAFT KXIBC2

ວັນທີ 6 ມີນາ 2023

ELECRAFT KXIBC2 Internal Battery Charger Module INTRODUCTION The KXIBC2 module is a C/10-rate charger for the KXBT2 Li-ion internal battery pack. Operation is simple, requiring only that a power supply be connected to the KX2 when charging is required. The…

ຍີ່ຫໍ້: ELECRAFT

WNC IMA2 Tape ແລະ Reel Module ຄູ່ມືຜູ້ໃຊ້

ວັນທີ 6 ມີນາ 2023

WNC IMA2 Tape and Reel Packing lnformation(TBD) Tape-and-Reel Package ໂມດູນຖືກຈັດສົ່ງຢູ່ໃນການຫຸ້ມຫໍ່ tape-and-reel ໂດຍອີງໃສ່ MPQ (500 pcs./reel; 4 reels/carton). ການຫຸ້ມຫໍ່ດຽວສໍາລັບ Sampສamples ແມ່ນບັນຈຸຢູ່ທີ່ 50 pcs./ກ່ອງ. ບໍ່ມີການຫຸ້ມຫໍ່ສູນຍາກາດ. ສampໄດ້…

ຍີ່ຫໍ້: WNC