ຕົວຄວບຄຸມໄຟ LED
(Multi-Zone)

M1C Wireless Controller

The Mini Pro Series LED Remote Control adopts RF 2.4GHz wireless transmission technology, with a maximum control distance of up to 30 meters (in an unobstructed environment).
When paired with the P5 Controller, one controller is compatible with 5-channel output and supports five types of lamps: DIM, CT, RGB, RGBW, and RGBCW. Within the effective control range, one remote control can control an unlimited number of controllers,  and realize functions such as light on/off, brightness adjustment, color temperature tuning, RGB static color selection, dynamic mode effects activation, and scene recall—meeting users’ needs for different lighting applications.
For zone control: One remote control can manage multiple zones, and multiple controllers can be coded into the same zone to achieve group control of that zone. Pressing the master on/off key of the remote control once can turn on/off the lights in all zones.

ຕົວກໍານົດການດ້ານວິຊາການ

ຕົວແບບ	M1C	M1D	M2C	M2D	M4C	M4D	M5C	M5D
ສີ	ສີຂາວ	ດຳ	ສີຂາວ	ດຳ	ສີຂາວ	ດຳ	ສີຂາວ	ດຳ
Dimming Type	DIM		CT		RGB / RGBW		RGBCW
ປະເພດໄຮ້ສາຍ	RF 2.4GHz
ປະລິມານການເຮັດວຽກtage	3Vdc (ແບັດເຕີຣີປຸ່ມ CR2032 × 1)
ກະແສສະແຕນບາຍ	＜2uA
ໄລຍະໄກ	30M (Under unobstructed conditions)
ຕົວຄວບຄຸມທີ່ເຂົ້າກັນໄດ້	P1、P2、P3、P4、 P5		P2、P3、P4、 P5		P3、P4、 P5		P5
ອຸນຫະພູມເຮັດວຽກ.	-25 ℃ ~ 50 ℃​
ນ້ຳໜັກ	40g ± 10g
ຂະໜາດ	104×58×9mm (remote)，108×63×14mm (remote+hold)

ຂະໜາດ

ການຕິດຕັ້ງຜະລິດຕະພັນ

ສອງ​ວິ​ທີ​ການ​ແກ້​ໄຂ​ຜູ້​ຖື​ຫ່າງ​ໄກ​ສອກ​ຫຼີກ​:

1. ແກ້ໄຂຕົວຍຶດຫ່າງໄກສອກຫຼີກຢູ່ໃນຝາດ້ວຍສອງສະກູ.
2. ແກ້ໄຂຕົວຍຶດຫ່າງໄກສອກຫຼີກໃນກໍາແພງດ້ວຍກາວ 3M.

ປ່ຽນແບັດ

ຟັງຊັນປຸ່ມ

Dimming Remote Control M1C/M1D

ເຂດ 1,2,3,4:
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).

Master Power: Turns all lights on or off.
Zone 1, 2, 3, 4: Short press to turn on and select the current zone’s light; long press to turn off the current zone’s light.
Brightness Touch Ring: Touch to change the brightness of the current zone’s light.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
Scene: Short press to recall the scene; long press for 3 seconds to save the current light state of the selected Zone to the scene.

Color Temperature Remote Control M2C/M2D

ເຂດ 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Brightness Touch Ring: Touch to change the color temperature of the current Zone’s light.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 consecutive levels.
Scene: Short press to recall the scene; long press for 3 seconds to save the current light state of the selected Zone to the scene.

ຟັງຊັນປຸ່ມ
RGB/RGBW Remote Control M4C/M4D

ເຂດ 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Touch Color Ring: Touch the RGB color ring to select a color.
Mode/Speed: Short press to switch dynamic modes; long press to adjust speed;
Short press both “1” and “4” Zone keys simultaneously to cycle through dynamic modes.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
White Light: For RGBW lights, short press to turn the W channel on or off; long press for 1-6 seconds to continuously adjust the W brightness.
Scene: Short press to recall the scene; long press for 3 seconds to save the current lighting state to the scene.

RGBCW Remote Control M5C/M5D

ເຂດ 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Touch Color Ring: Touch the color temperature/RGB color ring to select a color.
Mode/Speed: Short press to switch dynamic modes; long press to adjust speed;
Short press both “1” and “4” Zone keys simultaneously to cycle through dynamic modes.
Color Temperature: Short press to turn the current Zone’s color temperature channel on/off; touch the color ring to switch to the color temperature touch ring; Long press to adjust the brightness of the current color temperature.
RGB: Short press to turn the current Zone’s RGB channel on/off; touch the color ring to switch to the RGB touch ring;
Long press to adjust the brightness of the current color.
Scene: Short press to recall the scene; long press for 3 seconds to save the current lighting state to the scene.

ສີ	R/G/B values
ສີແດງ	R100%   G0%   B0%
ສີເຫຼືອງ	R100%   G100%   B0%
ສີຂຽວ	R0%   G100%   B0%
ສີຟ້າຂຽວ	R0%   G100%   B100%
ສີຟ້າ	R0%   G0%   B100%
ສີມ່ວງ	R100%   G0%   B100%
ສີຂາວ	R100%   G100%   B100%

ໂໝດໄດນາມິກ	Red-purple gradient	ໂໝດຄົງທີ່	ສີແດງ
	Blue-purple gradient
	Color temperature gradient (warm yellow, cool white)		ສີຂຽວ
	Three-color gradient (RGB)
	Six-color gradient (red, green, blue, yellow, purple, cyan)		ສີຟ້າ
	Seven colors changing (red, green, blue, yellow, purple, cyan, white)		ສີເຫຼືອງ
	Seven-color gradient (red, green, blue, yellow, purple, cyan, white)		ສີມ່ວງ
	Three-color gradient (RGB)		ສີຟ້າຂຽວ
	White gradually brightens and darkens		Mixed light white

ແຜນຜັງສາຍ

Used with P-series controllers

ການຈັບຄູ່ລະຫັດ
Key pairing code

1. Short press the controller’s ID learning button. The load indicator will start flashing. Please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Multi-Zone remote control: Press and hold the Master Power button until the remote indicator flashes slowly. Press the desired Zone button until the load indicator flashes quickly and stays on and the color ring changes. Pairing complete.

Power-on code pairing

1. After the controller powers off and back on, please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Multi-Zone remote control: Press and hold the Master Power button until the remote indicator flashes slowly. Press the desired Zone button until the load indicator flashes quickly and stays on and the color ring changes. Pairing complete.

ໝາຍເຫດ: One controller can be paired with a maximum of 10 remote controllers. If more than 10 remote controllers are paired, the ID code of the first remote controller will be automatically deleted.

ລະຫັດຈະແຈ້ງ
To delete all remote controls: Press and hold the controller ID learning button for 6 seconds. The controller load light will flash 4 times quickly and then stay on, indicating successful code clearing.

Use the remote controls together
Code pairing (assuming B learns from A)

1. Simultaneously press and hold the top two buttons on remote control B until the indicator light stays on, then release.
2. Within 5 seconds, press any button on remote control A. The indicator light on remote control B will turn off, indicating successful learning.
   *Remote controls of the same model can learn from each other.

ລະຫັດຈະແຈ້ງ
Simultaneously press and hold the top two buttons on the remote control for 6 seconds until the indicator light flashes twice, indicating successful code clearing.

ຕົວຊີ້ວັດສະຖານະແສງສະຫວ່າງ

• ເມື່ອໄຟເປີດຢູ່, ໃຫ້ກົດປຸ່ມໃດກໍໄດ້, ແລະໄຟສະແດງຂອງຣີໂໝດຄວບຄຸມຈະປ່ຽນເປັນສີແດງ.
• ຖ້າບໍ່ມີການກົດປຸ່ມໃດໆເປັນເວລາ 6 ວິນາທີ, ຣີໂໝດຄວບຄຸມຈະເຂົ້າສູ່ໂໝດນອນ. ເພື່ອອອກຈາກໂໝດນອນ, ໃຫ້ກົດປຸ່ມໃດກໍໄດ້.

ໝາຍເຫດ: ຖ້າໄຟ LED ບໍ່ສະຫວ່າງເມື່ອກົດປຸ່ມ, ແບັດເຕີຣີອາດຈະໝົດແລ້ວ. ກະລຸນາປ່ຽນແບັດເຕີຣີໃໝ່ໃຫ້ທັນເວລາ.

ການຂົນສົ່ງແລະການເກັບຮັກສາ

1. ການຂົນສົ່ງ
   ສິນຄ້າສາມາດສົ່ງຜ່ານພາຫະນະ, ເຮືອ ແລະຍົນ.
   ໃນລະຫວ່າງການຂົນສົ່ງ, ຜະລິດຕະພັນຄວນໄດ້ຮັບການປົກປ້ອງຈາກຝົນແລະແສງແດດ. ກະ​ລຸ​ນາ​ຫຼີກ​ເວັ້ນ​ການ​ຊ໊ອກ​ແລະ​ການ​ສັ່ນ​ສະ​ເທືອນ​ຢ່າງ​ຮຸນ​ແຮງ​ໃນ​ລະ​ຫວ່າງ​ຂະ​ບວນ​ການ​ໂຫຼດ​ແລະ​ຍົກ​ຍ້າຍ​.
2. ການເກັບຮັກສາ
   ເງື່ອນໄຂການເກັບຮັກສາຄວນປະຕິບັດຕາມມາດຕະຖານສິ່ງແວດລ້ອມຊັ້ນ I. ຜະລິດຕະພັນທີ່ເກັບຮັກສາໄວ້ຫຼາຍກວ່າຫົກເດືອນແມ່ນແນະນໍາໃຫ້ຖືກກວດກາຄືນໃຫມ່ແລະສາມາດນໍາໃຊ້ໄດ້ພຽງແຕ່ຫຼັງຈາກໄດ້ຮັບຄຸນສົມບັດ.

ຄວາມສົນໃຈ

• ກະລຸນາໃຊ້ໃນສະພາບແວດລ້ອມພາຍໃນທີ່ແຫ້ງແລ້ງ;
• ເມື່ອຕິດຕັ້ງແບດເຕີລີ່, ກະລຸນາເຊື່ອມຕໍ່ terminal ບວກແລະລົບຢ່າງຖືກຕ້ອງ. ຖ້າໄລຍະໄກຈະບໍ່ຖືກນໍາໃຊ້ເປັນເວລາດົນນານ, ເອົາຫມໍ້ໄຟອອກ;
• ເມື່ອໄລຍະໄກສັ້ນລົງ ແລະ ຫຼືຣີໂໝດບໍ່ເຮັດວຽກເລື້ອຍໆ, ກະລຸນາປ່ຽນແບັດເຕີຣີໃຫ້ທັນເວລາ;
• ກະລຸນາເອົາມັນລົງຢ່າງລະມັດລະວັງເພື່ອປ້ອງກັນການຕົກທີ່ເຮັດໃຫ້ເກີດຄວາມເສຍຫາຍ;
• ຖ້າຄວາມຜິດເກີດຂຶ້ນ, ກະລຸນາຢ່າພະຍາຍາມແກ້ໄຂຜະລິດຕະພັນດ້ວຍຕົນເອງ. ຖ້າທ່ານມີຄໍາຖາມໃດໆ, ກະລຸນາຕິດຕໍ່ຜູ້ສະຫນອງຂອງທ່ານ.
  ※ This manual is subject to changes without further notice. Product functions depend on the goods. Please feel free to contact our official distributors if you have any question.

ສັນຍາຮັບປະກັນ

• ໄລຍະເວລາຮັບປະກັນຈາກວັນທີສົ່ງ: 5 ປີ.
• ບໍລິການສ້ອມແປງຫຼືປ່ຽນແທນຟຣີສໍາລັບບັນຫາທີ່ມີຄຸນນະພາບແມ່ນສະຫນອງໃຫ້ພາຍໃນໄລຍະເວລາຮັບປະກັນ.

ການຍົກເວັ້ນການຮັບປະກັນດ້ານລຸ່ມ:

ເງື່ອນໄຂຕໍ່ໄປນີ້ແມ່ນບໍ່ຢູ່ໃນຂອບເຂດຮັບປະກັນຂອງການບໍລິການສ້ອມແປງຫຼືປ່ຽນແທນຟຣີ:

• ເກີນໄລຍະເວລາຮັບປະກັນ;
• ຄວາມເສຍຫາຍປອມໃດໆທີ່ເກີດຈາກສູງ voltage, overload, ຫຼືການດໍາເນີນງານທີ່ບໍ່ຖືກຕ້ອງ;
• ຜະລິດຕະພັນທີ່ມີຄວາມເສຍຫາຍທາງດ້ານຮ່າງກາຍຢ່າງຮ້າຍແຮງ;
• ຄວາມເສຍຫາຍຈາກໄພທຳມະຊາດ ແລະ ພາວະວິໄສ;
• ປ້າຍຮັບປະກັນ ແລະບາໂຄດຖືກເສຍຫາຍ.
• ບໍ່ມີສັນຍາໃດໆທີ່ບໍລິສັດຂອງພວກເຮົາໄດ້ເຊັນ.
  1. Repair or replacement provided is the only remedy for customers. Our company is not liable for any incidental or consequential damage unless it is within the law.
  2. Our company has the right to amend or adjust the terms of this warranty, and release in written form shall prevail.

ຄຳເຕືອນ

• ອັນຕະລາຍຈາກການບໍລິໂພກ: ຜະລິດຕະພັນນີ້ປະກອບດ້ວຍຈຸລັງປຸ່ມຫຼືຫມໍ້ໄຟຫຼຽນ.
• ການເສຍຊີວິດ ຫຼືການບາດເຈັບສາຫັດສາມາດເກີດຂຶ້ນໄດ້ຖ້າກິນ.
• ຈຸລັງປຸ່ມທີ່ກືນກິນ ຫຼື ແບດເຕີລີ່ຫຼຽນສາມາດເຮັດໃຫ້ເກີດການເຜົາໄໝ້ຂອງສານເຄມີພາຍໃນພາຍໃນ 2 ຊົ່ວໂມງ.
• ເກັບແບັດເຕີລີ່ໃໝ່ ແລະ ໃຊ້ແລ້ວໃຫ້ໄກຈາກເດັກ
• ໄປຫາແພດທັນທີ ຖ້າສົງໃສວ່າແບັດເຕີລີຖືກກືນ ຫຼືສຽບໃສ່ໃນສ່ວນໃດສ່ວນໜຶ່ງຂອງຮ່າງກາຍ.

ກ) ເອົາແບັດເຕີລີລີໄຊເຄີນທີ່ໃຊ້ແລ້ວຖິ້ມທັນທີຕາມລະບຽບທ້ອງຖິ່ນ ແລະ ບໍ່ໃຫ້ເດັກນ້ອຍ. ຫ້າມຖິ້ມແບັດເຕີລີໃນຖັງຂີ້ເຫຍື້ອໃນຄົວເຮືອນ ຫຼືຈູດເຜົາ.
b) ເຖິງແມ່ນວ່າຫມໍ້ໄຟທີ່ໃຊ້ແລ້ວອາດຈະເຮັດໃຫ້ເກີດການບາດເຈັບຮ້າຍແຮງຫຼືເສຍຊີວິດ.
c) ໂທຫາສູນຄວບຄຸມສານພິດໃນທ້ອງຖິ່ນສໍາລັບຂໍ້ມູນການປິ່ນປົວ.
d) The compatible battery type: CR2032.
e) ຫມໍ້ໄຟ nominal voltage: 3Vdc.
f) ແບດເຕີລີ່ທີ່ບໍ່ສາມາດສາກໄຟໄດ້ແມ່ນບໍ່ຄວນຈະຖືກສາກໃຫມ່.
g) ບໍ່ບັງຄັບໃຫ້ໄຫຼ, ຕື່ມຂໍ້ມູນໃສ່, disassemble, ຄວາມຮ້ອນຂ້າງເທິງ (ລະດັບອຸນຫະພູມຂອງຜູ້ຜະລິດລະບຸ) ຫຼື incinerate. ການເຮັດດັ່ງນັ້ນອາດຈະເຮັດໃຫ້ເກີດການບາດເຈັບຍ້ອນການລະບາຍອາກາດ, ການຮົ່ວໄຫຼຫຼືການລະເບີດທີ່ເຮັດໃຫ້ເກີດການເຜົາໄຫມ້ສານເຄມີ.
h) ໃຫ້ແນ່ໃຈວ່າຕິດຕັ້ງຫມໍ້ໄຟຢ່າງຖືກຕ້ອງຕາມຂົ້ວ (+ ແລະ -).
i.
j) ເອົາອອກແລະທັນທີ recycle ຫຼືຖິ້ມຫມໍ້ໄຟຈາກອຸປະກອນທີ່ບໍ່ໄດ້ນໍາໃຊ້ສໍາລັບໄລຍະເວລາຂະຫຍາຍຂອງທີ່ໃຊ້ເວລາຕາມລະບຽບການທ້ອງຖິ່ນ.
k) ຮັກສາຊ່ອງໃສ່ຫມໍ້ໄຟໃຫ້ປອດໄພສະເໝີ. ຖ້າຊ່ອງໃສ່ຫມໍ້ໄຟບໍ່ປິດຢ່າງປອດໄພ, ຢຸດການໃຊ້ຜະລິດຕະພັນ, ເອົາແບັດເຕີລີອອກ, ແລະຮັກສາມັນໄວ້ຫ່າງຈາກເດັກນ້ອຍ.

ເອກະສານ / ຊັບພະຍາກອນ

LTECH M1C Wireless Controller [pdf] ຄູ່ມືການສອນ M1C, M1D, M2C, M2D, M4C, 4D, M5C, M5D, 301, A3, M1C Wireless Controller, M1C, Wireless Controller, Controller

ເອກະສານອ້າງອີງ

• ຄູ່ມືຜູ້ໃຊ້