Elitech RC-4 Pro Digital Temperature Data Logger
ສິນຄ້າເກີນview ແລະຮູບລັກສະນະ
RC-4 Pro is a recorder used for recording temperature and humidity data during the transportation of food, drugs, chemicals, and other products. It is widely used in various transportation links such as warehousing and logistics, such as containers, refrigerated trucks, refrigerated containers, cold storage, and so on. By using a single button to start/stop recording, you can flip through pages to view various interfaces. Powered by a Single CR2450 battery for easy replacement, Transfer data to the “Jingchuang Data Center” management software through the Type-C interface. And the software can export files ໃນຮູບແບບເຊັ່ນ PDF, EXCEL, TXT, ແລະອື່ນໆ.
ສິນຄ້າເກີນview
- ທໍ່ລະບາຍອາກາດ
- ຈໍ LCD
- ການສືບສວນພາຍນອກ
- ປຸ່ມກົດ
- Buzzer
- Type-CC interface
- ຮູເຊືອກຫ້ອຍ
- ປ້າຍຊື່ອຸປະກອນ
- ການປົກຫຸ້ມຂອງຫມໍ້ໄຟ
ຕົວກໍານົດການດ້ານວິຊາການ
ຄໍາແນະນໍາການດໍາເນີນງານ
Activate the recorder
ເອົາແຜ່ນ insulation ແລະພະລັງງານໃສ່ເຄື່ອງບັນທຶກ.
Install sensors (according to actual needs)
Install sensors according to the requirements, and configure them through the Jingchuang Data Center before enabling the external probe function.
ຕິດຕັ້ງຊອບແວ
Please download and install the Jingchuang Data Center software through www.elitechlog.com.
ຕັ້ງຄ່າພາລາມິເຕີ
Connect the recorder to the computer via a USB cable and wait 
until the symbol appears on the screen. Software configuration: If you do not need to modify the default parameters, please click on the Summary menu> Quick Reset button. Can synchronize local time; if there is a need to modify parameters, please click on the Configure Device menu, change parameters, and click Save Parameters to complete the configuration.
ໝາຍເຫດ! To avoid time/time zone errors, please be sure to click on the quick reset or save parameters before first use or after replacing the battery to ensure that the local time is configured in the recorder. Exceeding the limit and shortening the recording interval parameter: By default, to is prohibited; If changed to allow, the recording interval will be automatically shortened to once every 1 minute after the humidity exceeds the limit.
ເລີ່ມການບັນທຶກ
Press and hold the button for 5 seconds to activate the recording, and the symbol 
appearing on the screen indicates successful activation.
ໝາຍເຫດ! The continuous flashing of the symbol indicates that the recorder is set with a startup delay. It will start recording after the end of the delayed startup.
Pause the recording
Click the button, and when the Log interface appears, double-click the button. When a symbol 
appears on the screen, it represents a pause in recording.
ໝາຍເຫດ! The pause function can only be used after being configured through the data center software.
ຢຸດການບັນທຶກ
Stop recording: Press and hold the button for 5 seconds, and the symbol
appearing on the screen indicates a successful stop.
ໝາຍເຫດ! The stopping method can be configured through the data center software.
ດາວໂຫລດຂໍ້ມູນ
Connect the recorder to the computer via a USB cable and wait until the symbol ປາກົດຢູ່ໃນຫນ້າຈໍ.
ສູນຂໍ້ມູນ: The data will be automatically uploaded. Click the export button to select the file format to export the report; If it is not automatically uploaded, please manually click the download button and repeat the operation.
ໄດ USB: directly export the corresponding report file.;
ໃຊ້ຄືນ
ຢຸດການເຊື່ອມຕໍ່ເຄື່ອງບັນທຶກກັບຄອມພິວເຕີ, ບັນທຶກ ຫຼືສົ່ງອອກຂໍ້ມູນ/ລາຍງານ, ແລະເຮັດຊ້ຳຂັ້ນຕອນ 4. ກຳນົດຄ່າພາລາມິເຕີ ແລະ 5. ເລີ່ມການບັນທຶກ.
ໝາຍເຫດ! After saving the parameters, the recorded historical data will be cleared. If you forget to save/export data, you can view and manage it
The device accessed ice through the historical data menu of the data center software.
ຕົວຊີ້ບອກສະຖານະ
Functions of the keypad
ໜ້າຈໍຫຼັກ
- ລະດັບຫມໍ້ໄຟ
- ຢຸດເຊົາ
- ການບັນທຶກ
- ເຊື່ອມຕໍ່ USB
- Upper and llower limits
- ປ່ຽນ Buzzer
- Recording groups
- ເດືອນ
- ສູງສຸດທີ່ເຄຍ. ມູນຄ່າ
- Min. ມູນຄ່າ
- ວັນທີ
- ຄ່າສະເລ່ຍ
- ພື້ນທີ່ຂໍ້ມູນ
- ເປີເຊັນtage
- ຫົວໜ່ວຍຂໍ້ມູນ
ລະດັບຫມໍ້ໄຟ
ໝາຍເຫດ: When the battery level is less than 10%, please replace the battery as soon as possible.
ປ່ຽນແບັດ
- ເປີດຝາປິດຫມໍ້ໄຟ.
- ຖອດແບັດເຕີຣີເກົ່າ
- Install a new CR2450 battery and place it in the battery compartment
- ປິດຝາປິດຫມໍ້ໄຟ.
ລາຍການຜະລິດຕະພັນ
- ບັນທຶກ ×1
- ສາຍຂໍ້ມູນ USB ×1
- ເຄື່ອງກວດອຸນຫະພູມພາຍນອກ×1
- ແບັດເຕີຣີປຸ່ມ 3V (CR2450) x 1
ການປ້ອງກັນລ່ວງໜ້າ
- Please store the recorder in a room-temperature environment.
- When using the recorder for the first time, please make sure to use the Jingchuang Data Center software for the parameter configuration to synchronize system time.
- Please do not remove the battery during the recording process of the recorder.
- If there is no button operation for 15 seconds, the recorder will automatically turn off the screen. Click the button to reset the battery screen.
- After each parameter reconfiguration of the recorder, the previously recorded data will be cleared. Please export the data before saving the parameters;
- To ensure humidity accuracy, please avoid contact with unstable chemical solvents or other chemical substances, especially avoid long-term presence or exposure to high concentrations of ketones, acetone, ethanol, isopropanol, toluene, and other environments.
- The battery symbol on the screen is below one square (
). Please do not use it for long-distance transportation - Propylene glycol liquid is used inside the probe of the gel bottle to simulate the temperature change inside the vaccine, which is more suitable for medical use scenarios.
ເອກະສານ / ຊັບພະຍາກອນ
 |
Elitech RC-4 Pro Digital Temperature Data Logger [pdf] ຄູ່ມືຜູ້ໃຊ້ RC-4 Pro, RC-4H Pro, RC-4 Pro Digital Temperature Data Logger, Digital Temperature Data Logger, Temperature Data Logger, Data Logger |