DELL Command Configure Software User Manual

DELL Command Configure Software User Manual

ໝາຍເຫດ, ຂໍ້​ຄວນ​ລະ​ວັງ​, ແລະ​ຄໍາ​ເຕືອນ​

ໝາຍເຫດ: ຫມາຍເຫດຊີ້ບອກເຖິງຂໍ້ມູນທີ່ສໍາຄັນທີ່ຊ່ວຍໃຫ້ທ່ານນໍາໃຊ້ຜະລິດຕະພັນຂອງທ່ານໄດ້ດີຂຶ້ນ.

ຂໍ້ຄວນລະວັງ: ຂໍ້ຄວນລະວັງບົ່ງບອກເຖິງຄວາມເສຍຫາຍທີ່ອາດເກີດຂື້ນກັບ Hardware ຫຼືການສູນເສຍຂໍ້ມູນແລະບອກວິທີການຫລີກລ້ຽງບັນຫາ.

ຄໍາເຕືອນ: ຄໍາເຕືອນຊີ້ບອກເຖິງຄວາມເປັນໄປໄດ້ຂອງຄວາມເສຍຫາຍຂອງຊັບສິນ, ການບາດເຈັບສ່ວນບຸກຄົນ, ຫຼືເສຍຊີວິດ.

© 2025 Dell Inc. ຫຼື ບໍລິສັດຍ່ອຍຂອງມັນ. ສະຫງວນລິຂະສິດທັງໝົດ. Dell Technologies, Dell, ແລະເຄື່ອງໝາຍການຄ້າອື່ນໆແມ່ນເຄື່ອງໝາຍການຄ້າຂອງ Dell Inc. ຫຼືບໍລິສັດຍ່ອຍຂອງມັນ. ເຄື່ອງຫມາຍການຄ້າອື່ນໆອາດຈະເປັນເຄື່ອງຫມາຍການຄ້າຂອງເຈົ້າຂອງຂອງເຂົາເຈົ້າ.

Introduction to Dell Command | Configure

Dell Command | Configure is a software package that provides BIOS configuration capability for Dell client systems. IT administrators can use this tool to configure BIOS settings and create BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI).

ໝາຍເຫດ: Dell Command | Configure replaces Dell Client Configuration Toolkit version 2.2.1.

• ຄໍາສັ່ງ Dell | Configure 4.10.1 ຫຼືຫຼັງຈາກນັ້ນສ້າງ SCE 64-bit ທີ່ມີຂໍ້ຈໍາກັດ.
• Dell Command | Configure 4.10.1 or later on a 64–bit ARM client machine, generates an ARM-based 64–bit SCE.

For more information, see the Dell Command | Configure 5.x User’s Guide on the Support | Dell site.

ຫົວຂໍ້:

• ຮຸ່ນ
• ຜູ້ຊົມທີ່ຕັ້ງໃຈ
• ຈຸດປະສົງເອກະສານ

ຮຸ່ນ

ບົດ​ນີ້​ສະ​ຫນອງ​ໃຫ້​ຫຼາຍ​ກວ່າ​view of the Dell Command | Configure version history, including release dates, supported operating systems, and compatible platform architectures to help you identify which version aligns with your system requirements.

Dell Command | Configure supports the following Windows operating systems:

• Windows 11
• Windows 10
• ສະພາບແວດລ້ອມການຕິດຕັ້ງ Windows Preinstallation (Windows PE)

The following table lists the available Dell Command | Configure versions along with their release dates, supported operating systems, and platform compatibility.

ຕາຕະລາງ 1. ເວີຊັ່ນ matrix

ໝາຍເຫດ: Starting from the Dell Command | Configure 5.1.0 release, support for 32-bit systems has been discontinued.

ຜູ້ຊົມທີ່ຕັ້ງໃຈ

The installation guide for Dell Command | Configure is intended for IT professionals and system administrators. It offers comprehensive instructions for configuring BIOS settings and creating BIOS packages using both the Dell Command Configure User Interface (UI) and Command-Line Interface (CLI).

ຈຸດປະສົງເອກະສານ

This document provides instructions for installing and configuring BIOS settings and creates BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI) for efficient BIOS management.

ການເຂົ້າເຖິງຄໍາສັ່ງ Dell | ຕັ້ງຄ່າຕົວຕິດຕັ້ງ

ຄໍາສັ່ງ Dell | ຕັ້ງຄ່າການຕິດຕັ້ງ file is available as a Dell Update Package (DUP) at Support | Dell. Follow these steps to download the DUP:

1. ໄປທີ່ສະຫນັບສະຫນູນ | Dell.
2. ພາຍໃຕ້ ຜະລິດຕະພັນໃດທີ່ພວກເຮົາສາມາດຊ່ວຍທ່ານໄດ້, ເຂົ້າ ການບໍລິການ Tag ຂອງອຸປະກອນ Dell ທີ່ຮອງຮັບຂອງທ່ານແລະຄລິກ ສົ່ງ, ຫຼືຄລິກ ກວດພົບຄອມພິວເຕີສ່ວນບຸກຄົນ.
3. ໃນຫນ້າສະຫນັບສະຫນູນຜະລິດຕະພັນສໍາລັບອຸປະກອນ Dell ຂອງທ່ານ, ໃຫ້ຄລິກໃສ່ ໄດເວີແລະດາວໂຫລດ.
4. ກົດ ຊອກຫາຄົນຂັບສະເພາະດ້ວຍຕົນເອງ ສໍາລັບທ່ານ [ແບບຈໍາລອງ].
5. ກວດສອບ ການຄຸ້ມຄອງລະບົບ ກ່ອງunderາຍຕິກຢູ່ທາງລຸ່ມ ປະເພດ ເລື່ອນລົງ.
6. ສະຖານທີ່ Dell Command | Configure in list and select ດາວໂຫຼດ ຢູ່ເບື້ອງຂວາຂອງໜ້າ.
7. ຊອກ​ຫາ​ທີ່​ດາວ​ໂຫຼດ​ໄດ້​ file ໃນຄອມພິວເຕີຂອງທ່ານ (ໃນ Google Chrome, the file ປາກົດຢູ່ລຸ່ມສຸດຂອງປ່ອງຢ້ຽມ Chrome), ແລະດໍາເນີນການປະຕິບັດໄດ້ file.
8. ປະຕິບັດຕາມຄໍາແນະນໍາໃນຫນ້າຈໍ.

Dell Command | Configure for Windows

This section provides details about the supported Windows versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Windows systems.

ຫົວຂໍ້:

• ລະບົບປະຕິບັດການທີ່ຮອງຮັບສໍາລັບ Windows
  
• ເວທີທີ່ສະຫນັບສະຫນູນ
  
• Installing Dell Command | Configure on Windows systems
• Uninstalling Dell Command | Configure from Windows systems
• Upgrading Dell Command | Configure on Windows systems

ລະບົບປະຕິບັດການທີ່ຮອງຮັບສໍາລັບ Windows

ຕາຕະລາງ 2. ລະບົບປະຕິບັດການທີ່ຮອງຮັບ

ເວທີທີ່ສະຫນັບສະຫນູນ

Table 3. Supported platforms

Table 3. Supported platforms (continued)

ໝາຍເຫດ: Platforms must support WMI-ACPI BIOS for full functionality.

ໝາຍເຫດ: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell

Installing Dell Command | Configure on Windows systems

You can install Dell Command | Configure on Windows systems using either the Dell Update Package (DUP) or the MSI installer.
Both installers support standard and silent (unattended) installation modes.

ໝາຍເຫດ: Microsoft .NET 4.8.1 or later must be installed on the client system to install Dell Command | Configure using the user interface.

ໝາຍເຫດ: If User Account Control (UAC) is enabled on a Windows 10 system, silent mode installation is not allowed. Ensure that you have administrative privileges before installing Dell Command | Configure in silent mode.

ເງື່ອນໄຂເບື້ອງຕົ້ນ

Before installing Dell Command | Configure, ensure the following:

• A supported Windows operating system is installed and running.
• Dell Command | Configure installation file is available (downloadable from Support | Dell).
• Administrator privileges are available on the system.
• Microsoft .NET 4.8.1 (for UI) and .NET 8.0 SDK (for Dell Command Secure BIOS Configuration Server) are installed.
• Microsoft Visual C++ Redistributable for Visual Studio 2022 is installed.
• WMI-ACPI compliant BIOS is available for full functionality.

ໝາຍເຫດ:

• The system must be connected to a stable network when installing Dell Command | Configure with support for Dell Command Secure BIOS Configuration.
• On Windows 10 or later, enable Microsoft .NET Framework 4.8 or later version from the ເປີດ ຫຼືປິດຄຸນສົມບັດຂອງ Windows ຈໍ.
• The system has limited functionality if it does not have a WMI-ACPI compliant BIOS. Update the BIOS with a compatible version, if available. For more information, see Windows SMM Security Mitigations Table (WSMT) Compliance section in the Dell Command | Configure User’s Guide at Support | Dell.

Install Dell Command | Configure using DUP: Standard installation

To install Dell Command | Configure, run the Dell Update Package (DUP) with default settings. This method simplifies deployment and requires minimal user input.

1. Double-click the downloaded DUP, click Yes, and then click INSTALL.
   ຄໍາສັ່ງ Dell | ການຕັ້ງຄ່າຕົວຊ່ວຍສ້າງການຕິດຕັ້ງຖືກສະແດງ.
2. ແລ່ນຕົວຊ່ວຍສ້າງການຕິດຕັ້ງ.
   ສໍາລັບຂໍ້ມູນເພີ່ມເຕີມ, ເບິ່ງ ແລ່ນຕົວຊ່ວຍສ້າງການຕິດຕັ້ງ.

Install Dell Command | Configure using DUP: Silent installation

To install Dell Command | Configure silently, use the Dell Update Package (DUP) with command-line switches that suppress user prompts. This method enables automated, unattended installation.

1. Browse to the folder where you have downloaded the Dell Update Package (DUP) and open the command prompt.
2. ດໍາເນີນການຄໍາສັ່ງຕໍ່ໄປນີ້:

Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.

NOTE: For more information about using commands, type any one of the following commands:

• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.
• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/?.

NOTE: During silent installation using DUP, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server.

Install Dell Command | Configure using MSI file: Standard installation

To install Dell Command | Configure, run the MSI file directly for a standard installation with default settings providing a simple and user-friendly setup process.

1. Double-click the downloaded Dell Update Package (DUP), ແລະຄລິກ Yes.
2. ກົດ EXTRACT.
   ໜ້າຈໍ Browse For Folder ຈະຖືກສະແດງ.
3. Specify a folder location on the system, or create a folder to extract the files, and click OK.
4. ເຖິງ view ສານສະກັດຈາກ files, ຄລິກ View ແຟ້ມ.
   ໂຟນເດີປະກອບມີສິ່ງຕໍ່ໄປນີ້ files:
   ● 1028.mst
   ● 1031.mst
   ● 1034.mst
   ● 1036.mst
   ● 1040.mst
   ● 1041.mst
   ● 1043.mst
   ● 2052.mst
   ● 3076.mst
   ● Command_Configure.msi
   ● mup.xml
   ● package.xml
5. ເພື່ອເຂົ້າຫາ Dell Command | ຕັ້ງຄ່າຕົວຊ່ວຍສ້າງການຕິດຕັ້ງ, ຄລິກສອງຄັ້ງ Command_Configure.msi.
6. ແລ່ນຕົວຊ່ວຍສ້າງການຕິດຕັ້ງ.
   ສໍາລັບຂໍ້ມູນເພີ່ມເຕີມ, ເບິ່ງ ແລ່ນຕົວຊ່ວຍສ້າງການຕິດຕັ້ງ.
   After you install Dell Command | Configure , you can use the GUI or the CLI to configure the client systems. For more information about configuring the systems, see the following documents at Support | Dell:
   ● Dell Command | Configure Command-Line Interface Reference Guide
   ● Dell Command | Configure User’s Guide

ແລ່ນຕົວຊ່ວຍສ້າງການຕິດຕັ້ງ

To run the installation wizard for installing the Dell Command | Configure .msi file ໃນອຸປະກອນຂອງທ່ານ:

1. Browse to the folder in which you have extracted the Command_Configure.msi or DUP file.
2. Right-click the .msi or DUP and click Run as administrator.
   ຕົວຊ່ວຍສ້າງການຕິດຕັ້ງຖືກສະແດງ.
3.  ກົດຕໍ່ໄປ.
   ຫນ້າຈໍຂໍ້ຕົກລົງໃບອະນຸຍາດຖືກສະແດງ.
4. ອ່ານ​ຂໍ້​ຕົກ​ລົງ​ໃບ​ອະ​ນຸ​ຍາດ​ແລະ​ຄລິກ​ຂ້າ​ພະ​ເຈົ້າ​ຍອມ​ຮັບ​ຂໍ້​ກໍາ​ນົດ​ໃນ​ສັນ​ຍາ​ໃບ​ອະ​ນຸ​ຍາດ​, ແລະ​ຫຼັງ​ຈາກ​ນັ້ນ​ໃຫ້​ຄລິກ​ໃສ່​ຕໍ່​ໄປ​.
   ຫນ້າຈໍຂໍ້ມູນລູກຄ້າຖືກສະແດງ.
5. Type the username and organization, select one of the following options, and then click Next.
   ● For multiple users, select Anyone who uses this computer (all users).
   ● For a single user, select Only for me (Dell Computer Corporation).
   ໜ້າຈໍການຕັ້ງຄ່າແບບກຳນົດເອງຈະສະແດງຂຶ້ນ.
6. ຄລິກຕໍ່ໄປເພື່ອຕິດຕັ້ງ Dell Command | ຕັ້ງຄ່າ CLI ແລະ GUI ໃນໄດເລກະທໍລີເລີ່ມຕົ້ນ. ຄໍາສັ່ງເລີ່ມຕົ້ນ Dell | ຕັ້ງຄ່າໄດເລກະທໍລີການຕິດຕັ້ງແມ່ນ:
   ● For 32-bit systems, C:\Program Files\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configure.
   ໜ້າຈໍພ້ອມຕິດຕັ້ງໂປຣແກຣມຈະສະແດງຂຶ້ນ.
7. ກົດ Yes.
   The Installing Dell Command | Configure screen is displayed. When the installation completes, the installation wizard- completed screen is displayed.
8. ກົດ Finish.
   ຖ້າ Dell Command | ຕັ້ງຄ່າ GUI ຖືກຕິດຕັ້ງຢ່າງສໍາເລັດຜົນ, ທາງລັດສໍາລັບ GUI ຈະຖືກສະແດງຢູ່ໃນ desktop.

Install Dell Command | Configure using .msi file: Silent installation

You can seamlessly install Dell Command | Configure in silent mode using the .msi file, leveraging command-line parameters for efficient deployment.

ໝາຍເຫດ: Dell Command | Configure silent mode installation supports installing the Dell Command Secure BIOS Configuration Server, but it does not support the Dell Command | Configure option.

ໝາຍເຫດ: By default, during silent installation using the .msi file, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server. To install DCC with DCSBC server, use the following command: msiexec.exe /i Command_Configure.msi DCSBC=1 /qn

1. ໄປທີ່ໂຟນເດີທີ່ Dell Command | Configure installer ຖືກສະກັດອອກຈາກ Dell Update Package (DUP).
2. Open Command Prompt as administrator.
3. ດໍາເນີນການຄໍາສັ່ງຕໍ່ໄປນີ້: msiexec.exe /i Command_Configure.msi /qn
   ຄໍາສັ່ງ Dell | ການຕັ້ງຄ່າອົງປະກອບຖືກຕິດຕັ້ງຢ່າງງຽບໆໃນສະຖານທີ່ຕໍ່ໄປນີ້:
   ● For 32-bit systems, C:\Program Files\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configure.

ການຕິດຕັ້ງດ້ວຍພາສາທີ່ຮອງຮັບ

To assess silent and unattended with supported languages, run the following command: msiexec /i Command_Configure.msi TRANSFORMS=1036.mst.

To specify the installation language, use the command-line option TRANSFORMS=<language ID>.mst, where <language ID> corresponds to one of the following:

• 1028 — ຈີນ​ໄຕ້​ຫວັນ​
• 1031 — ເຍຍ​ລະ​ມັນ​
• 1033 - ພາສາອັງກິດ
• 1034 — ແອສປາໂຍນ
• 1036 — ຝຣັ່ງ
• 1040 — Italian
• 1041 — ພາ​ສາ​ຍີ່​ປຸ່ນ​
• 1043 — ໂຮນລັງ
• 2052 — ພາສາຈີນຕົວຫຍໍ້
• 3076 — ຈີນ​ຮົງ​ກົງ​

ໝາຍເຫດ: If the specified language or the default operating system language is not supported, the installation defaults to English.

Uninstalling Dell Command | Configure from Windows systems

To uninstall Dell Command | Configure, use the Control Panel to remove the application from Windows ensuring clean removal without affecting system settings.

1. ເປີດ ກະດານຄວບຄຸມ.
2. ໄປທີ່ ໂປຣແກຣມ > ໂປຣແກຣມ ແລະຄຸນສົມບັດ.
3. Find Dell Command | Configure ໃນບັນຊີລາຍຊື່.
4. Right-click it and select ຖອນການຕິດຕັ້ງ.
5. Follow the on-screen prompts to complete the uninstallation.

Upgrading Dell Command | Configure on Windows systems

You can upgrade Dell Command | Configure using a Dell Update Package (DUP) or the .msi file.

ໝາຍເຫດ: Microsoft .NET Framework 8.0 or later must be installed on the client system to ensure a successful Dell Command | Configure user interface installation.

ໝາຍເຫດ: If Windows User Account Control (UAC) is enabled on Windows 10 and 11 systems, you cannot install Dell Command | Configure in silent mode. Ensure that you have an administrative privilege before installing Dell Command | Configure in silent mode.

ໝາຍເຫດ: This system does not have a WMI-ACPI compliant BIOS, so the limited functionality is available. Update the BIOS with a compatible version, if available. For more information, see Dell Command | Configure 5.x Release Notes at Support | Dell.

ໝາຍເຫດ: You cannot install and upgrade Dell Command | Configure on non-WMI-ACPI in silent mode.

Upgrade Dell Command | Configure using DUP file

ປະຕິບັດຕາມຂັ້ນຕອນຕໍ່ໄປນີ້ເພື່ອຍົກລະດັບ Dell Command | Configure (ໃນເມື່ອກ່ອນແມ່ນ Dell Client Configuration Toolkit) ເປັນເວີຊັນຕໍ່ໄປ:

1. Double-click the downloaded DUP, and then click ຕິດຕັ້ງ.
   ຄໍາສັ່ງ Dell | ເປີດໃຊ້ຕົວຊ່ວຍສ້າງການຕິດຕັ້ງແລ້ວ.
2. ດໍາເນີນການຕົວຊ່ວຍສ້າງການຕິດຕັ້ງ, ແລະປະຕິບັດຕາມຄໍາແນະນໍາທີ່ສະແດງຢູ່ໃນຫນ້າຈໍ.

Upgrade Dell Command | Configure using .msi file

To upgrade Dell Command | Configure, uninstall the existing version and install the new version using the .msi installer ensuring a clean upgrade with the latest features and fixes.

1. ດາວໂຫລດການຕິດຕັ້ງຫຼ້າສຸດ file Dell-Command-Configure-
   Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE from Support | Dell.
2. Extract the installation using any of the following:
   ● From the folder where you extracted the file, double-click the Dell_Command_Configure.msi file
   ● From the command prompt, browse to the directory where you extracted the file, ແລະຫຼັງຈາກນັ້ນດໍາເນີນການຄໍາສັ່ງຕໍ່ໄປນີ້:
   msiexec.exe /i Command_Configure.msi REINSTALL=ທັງໝົດ REINSTALLMODE=VOMUS
   ໝາຍເຫດ: ຫນ້າຈໍຂອງຄວາມຍາວປາການຕິດຕັ້ງແມ່ນສະແດງຕາມດ້ວຍ “ເວີຊັນເກົ່າຂອງ Dell Command | ກວດພົບການຕັ້ງຄ່າຢູ່ໃນລະບົບນີ້. ຖ້າ​ຫາກ​ທ່ານ​ສືບ​ຕໍ່​, ຜູ້​ຕິດ​ຕັ້ງ​ຈະ​ເອົາ​ສະ​ບັບ​ເກົ່າ​ອອກ​ແລະ​ດໍາ​ເນີນ​ການ​ຕິດ​ຕັ້ງ​ສະ​ບັບ​ຫລ້າ​ສຸດ​. ຖ້າທ່ານຍົກເລີກການຕິດຕັ້ງເວີຊັນຫຼ້າສຸດ, ລະບົບຈະບໍ່ຖືກຟື້ນຟູເປັນເວີຊັນກ່ອນຂອງ Dell Command | ຕັ້ງຄ່າ. ເຈົ້າຕ້ອງການສືບຕໍ່ບໍ?” ຂໍ້ຄວາມ.
3. ປະຕິບັດຕາມຄໍາແນະນໍາໃນຫນ້າຈໍເພື່ອຍົກລະດັບ.
   ໝາຍເຫດ: ສຳລັບການອັບເກຣດແບບງຽບໆ, ໃຫ້ແລ່ນຄຳສັ່ງຕໍ່ໄປນີ້: msiexec /i Command_Configure.msi REINSTALL=ALL REINSTALLMODE=vmous REBOOT=REALLYSUPPRESS /qn
   NOTE: If a previous version of Dell Command | Configure is installed in a non-default directory, you cannot upgrade to the latest Dell Command | Configure version. In this case, uninstall the existing version and assess fresh installation of the latest version.

ອັບເກຣດຢູ່ໃນໂຟນເດີເລີ່ມຕົ້ນ

To upgrade Dell Command | Configure, run a command from the extracted DUP folder to silently install the update in the default directory.

1. ຄົ້ນຫາໂຟນເດີທີ່ທ່ານໄດ້ສະກັດ Dell Command | ຕັ້ງຄ່າຕົວຕິດຕັ້ງຈາກຊຸດອັບເດດ Dell (DUP).
2. ດໍາເນີນການຄໍາສັ່ງຕໍ່ໄປນີ້: msiexec.exe /i Command_Configure.msi /qn
   ຄໍາສັ່ງ Dell | ການຕັ້ງຄ່າອົງປະກອບຖືກຕິດຕັ້ງຢ່າງງຽບໆໃນສະຖານທີ່ຕໍ່ໄປນີ້:
   ● For 32-bit systems, C:\Program Files (x86)\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configure.

Dell Command | Configure for Linux

This section provides details about the supported Linux versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Linux systems.

ຫົວຂໍ້:

• Supported operating systems for Linux
• Supported Platforms for Linux
• Installing Dell Command | Configure on Linux systems
• Uninstalling Dell Command | Configure on Linux systems
• Upgrading Dell Command | Configure for systems running on Linux

Supported operating systems for Linux

ຕາຕະລາງ 4. ລະບົບປະຕິບັດການທີ່ຮອງຮັບ

Supported Platforms for Linux

Table 5. Supported platforms

ໝາຍເຫດ: Platforms must support WMI-ACPI BIOS for full functionality.

ໝາຍເຫດ: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell.

Installing Dell Command | Configure on Linux systems

To install Dell Command | Configure on Linux, download the appropriate .deb or .rpm package from Dell Support and use your package manager to install it enabling CLI-based BIOS configuration on supported Dell systems.

ໝາຍເຫດ:

• Dell Command | Configure user interface is not supported on systems running the Linux operating system.
• Dell Command Secure BIOS Configuration(DCSBC) is not supported on systems running the Linux operating system.

You can install the Dell Command | Configure for Red Hat and Debian-based linux distributions, by following these steps:

1. Go to Support | Dell, download the tar.gz file.
2. ໝາຍເຫດ:
   ● If you have downloaded the package for Red Hat Enterprise Linux, the RPMs are included in the package.
   ● If you have downloaded the package for Ubuntu Desktop, the Debians are included in the package.

Install the RPMs or Debians as appropriate for your system.
ເສັ້ນທາງການຕິດຕັ້ງເລີ່ມຕົ້ນແມ່ນ /opt/dell/dcc.

ເງື່ອນໄຂເບື້ອງຕົ້ນ

• ສະຖານີບ່ອນເຮັດວຽກຄວນເຮັດວຽກຢູ່ໃນລະບົບປະຕິບັດການ Linux ທີ່ຮອງຮັບ.
• ດາວໂຫລດ openSSL 1.x libraries ເພື່ອຕິດຕັ້ງ ແລະແລ່ນ Dell Command | ຕັ້ງຄ່າເທິງ Red Hat Enterprise Linux 8 ແລະ Ubuntu Desktop 20.04.
• Download openSSL 3.x libraries to install and run Dell Command | Configure on Red Hat Enterprise Linux 9, Ubuntu Desktop 22.04, and Ubuntu Desktop 24.04.

Install Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To install Dell Command | Configure on Red Hat Enterprise Linux 8 or 9, download the RPM package from Dell Support and install it using the command line.

1. ຈາກ dell.com/support, Download the command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz file from Support | Dell .
2. Untar ໄດ້ file ການນໍາໃຊ້ຄໍາສັ່ງຕໍ່ໄປນີ້:

tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz

To install Dell Command | Configure on systems running Red Hat Enterprise Linux 8 or 9 systems using 64-bit RPMs, run the commands in the following order:

rpm —ivh srvadmin-hapi-<version number>.el8.x86_64.rpm

rpm —ivh command-configure-<version number>-<Build Number>.<RHEL Version>.<architecture>.rpm

Installing Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04

To install Dell Command | Configure on supported Ubuntu versions, download the DEB package from Dell Support and install it using the command line. See Accessing Dell Command | Configure installer.

1. Download the command_configure-<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz from Support | Dell.
2. Untar ໄດ້ file using the following command: tar -xvzf command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz
   The installer command-configure_<version><Build Number>.<Ubuntu
   ລຸ້ນ>_ .tar.gz ມີແພັກເກັດຕໍ່ໄປນີ້ທີ່ຕ້ອງຕິດຕັ້ງຕາມລຳດັບຕໍ່ໄປນີ້:
   ● srvadmin-hapi_<version number>_amd64.deb
   ● command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
3. To install HAPI, run the following command: dpkg -i srvadmin-hapi_<version number>_amd64.deb
   ໝາຍເຫດ: If the installation on Ubuntu fails due to dependency issues with libc, ensure that you upgrade the system by running the following command:
   apt-get -f ຕິດຕັ້ງ
4. To install Dell Command | Configure, run:
   dpkg -i command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
   ເສັ້ນທາງການຕິດຕັ້ງເລີ່ມຕົ້ນແມ່ນ /opt/dell/dcc.
   ໝາຍເຫດ: If the installation on Ubuntu fails due to dependency problems libc, then ensure to upgrade the system using apt-get upgrade command:
   apt-get -f ຕິດຕັ້ງ

Uninstalling Dell Command | Configure on Linux systems

To uninstall Dell Command | Configure on Linux, run the appropriate RPMs for your system to remove the installed package (rpm or deb) based on your distribution removing the application and its components.

ໝາຍເຫດ: Uninstalling or upgrading Dell Command | Configure on systems running supported Linux operating systems leave empty files and folders on the system. These residual files and folders do not affect system functionality.

Uninstall Dell Command | Configure from Red Hat Enterprise Linux 8 and 9

ເພື່ອຖອນການຕິດຕັ້ງ Dell Command | ຕັ້ງຄ່າໃນລະບົບທີ່ແລ່ນ Red Hat Enterprise Linux 8 ຫຼື 9, ດໍາເນີນການຄໍາສັ່ງຕາມລໍາດັບຕໍ່ໄປນີ້:

rpm -e command-configure-<version>-<build number>.el8/9.x86_64

rpm -e srvadmin-hapi- .el8.x86_64

Uninstall Dell Command | Configure from Ubuntu Desktop

You can uninstall Dell Command | Configure and dependent packages on systems running Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

ໝາຍເຫດ: You must uninstall Dell Command | Configure before uninstalling the dependent packages.

1. ເພື່ອຖອນການຕິດຕັ້ງ Dell Command | ຕັ້ງຄ່າ ແລະລຶບການຕັ້ງຄ່າອອກ files ແລະຊົ່ວຄາວ files, run the following command: dpkg –purge command-configure
2. ເພື່ອຖອນການຕິດຕັ້ງ Hapi ແລະເອົາການຕັ້ງຄ່າອອກ files ແລະຊົ່ວຄາວ files, run the following command: dpkg –purge srvadmin-hapi
3. To verify that the Dell Command | Configure is uninstalled in your system, run the following command: dpkg –l | grep command-configure
   If Dell Command | Configure details are not displayed, then the uninstallation is successful.

Upgrading Dell Command | Configure for systems running on Linux

You can upgrade Dell Command | Configure on Linux, uninstall the existing version and install the latest package.

1. Download the Dell Command | Configure .tar.gz file from Support | Dell and save it on your system.
2. ອັບເກຣດເວີຊັນຂອງ Dell Command | ຕັ້ງຄ່າໃນລະບົບ.

ໝາຍເຫດ: Uninstalling and upgrading Dell Command | Configure on systems running supported Linux operating systems leaves empty files ແລະໂຟນເດີ້ຕ່າງໆໃນລະບົບ. ໄດ້ files ແລະ folders ບໍ່ມີຜົນກະທົບທີ່ເປັນປະໂຫຍດ.

Upgrade Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To upgrade Dell Command | Configure on Red Hat Eenterprse Linux 8 or 9, uninstall the current version and install the latest RPM package.

1. Download the command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz file from Support | Dell.
2. Untar ໄດ້ file using the following command: tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz

To upgrade Dell Command | Configure on computers running Red Hat Enterprise Linux 8 or 9 computers using 64-bit RPMs, run the commands in the following order:

rpm -Uvh -nodeps srvadmin-hapi- . .x86_64.rpm

rpm —Uvh command-configure-<version>-<build number>.<RHEL Version>.x86_64.rpm

Upgrade Dell Command | Configure on Ubuntu Desktop

To upgrade Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

1. Download the command_configure-linux-<version>-<build number>.tar.gz from Support | Dell.
2. Untar ໄດ້ file using the following command: tar -zxvf command-configure_<version>-<build number>.<Ubuntu Version>_amd64.tar.gz
3. ເພື່ອຍົກລະດັບ, ດໍາເນີນການຄໍາສັ່ງຕໍ່ໄປນີ້:
   dpkg -i srvadmin-hapi_<version number>_amd64.deb
   dpkg -i command-configure_<version>-<build number>.<Ubuntu Version>_amd64.deb
4. ເພື່ອກວດສອບຄໍາສັ່ງ Dell ໃນປັດຈຸບັນ | ຕັ້ງຄ່າເວີຊັນ, ໄປທີ່ເສັ້ນທາງການຕິດຕັ້ງເລີ່ມຕົ້ນ ແລະດໍາເນີນການ:
   ./cctk –version

Advanced Dell Command | Configure installation scenarios

ບົດ​ນີ້​ສະ​ຫນອງ​ໃຫ້​ຫຼາຍ​ກວ່າ​view of advanced installation scenarios for Dell Command | Configure, including secure BIOS configuration and installation in the Windows Preinstallation Environment (Windows PE). These scenarios ensure robust system management and deployment capabilities.

ຫົວຂໍ້:

• Installing Dell Command | Configure for Dell Command Secure BIOS Configuration
• Dell Command | Configure for Windows Pre installation Environment.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration

Hardware Security Module (HSM) is used as a signing method for the Dell Command Secure BIOS Configuration workflow.

ໝາຍເຫດ: Dell Command Secure BIOS Configuration(DCSBC) is not compatible with ARM64-bit systems.

ເງື່ອນໄຂເບື້ອງຕົ້ນ

Dell Command Secure BIOS Configuration with Dell Command | Configure allows you to use any Hardware Security Module vendor to sign the Dell Command Secure BIOS Configuration Server payloads.

ໃຫ້ແນ່ໃຈວ່າໄດ້ປະຕິບັດຕາມຄວາມຕ້ອງການດັ່ງຕໍ່ໄປນີ້:

• HSM Setup and OpenSSL: Ensure that you have set up your Hardware Security Module (HSM) provider in your environment. It is recommended to use OpenSSL as the open-source signing tool to generate signatures, which can then be used by Dell Command | Configure.
• Update HSMSigning.bat File: You must update the HSMSigning.bat file with a command compatible with your HSM setup. This file is at: C:\Program Files (x86)\Dell\Command Configure\X86_64\HSMSigning.bat. Modify the signature generation command in line 12 according to your HSM provider requirements. The default command is: “%OpensslPath%\openssl.exe” dgst -sha256 -sign “%ObfuscatedKeyPath%\%PrivateKeyName%” -out “%outlocat%\blobsignature.txt” %1 . Ensure that the command you provide generates the signature in the same path as specified in the default command, with the filename set as blobsignature.txt. Do not modify the last option %1, as it allows the signature command to accept the payload file that is generated by Dell Command | Configure during runtime for signing.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration Server

To install Dell Command | Configure for use with the Secure BIOS Configuration Server, download the appropriate installer package and follow the setup instructions to enable remote BIOS configuration and policy enforcement.

1. Run Command_Configure.msi from Power Shell in administrator mode.
   ຕົວຊ່ວຍສ້າງການຕິດຕັ້ງຖືກສະແດງ.
2. Select the Dell Command Secure Bios Configuration Server option.
3. ກົດຕໍ່ໄປ.
4. ກົດຕິດຕັ້ງເພື່ອເລີ່ມຕົ້ນການຕິດຕັ້ງ.
   The installation completion wizard is displayed.
5. ກົດ Finish ເພື່ອສໍາເລັດການຕິດຕັ້ງ.
   The Dell Secure Configuration Service is created and initiated in the Windows Services tab.
   ໝາຍເຫດ: To run Dell Secure Configuration on a particular port, the port must be updated to the appsettings.json file ຢູ່ URL line. Locate the following path: C:\Program Files (x86)\Dell\Command Configure\ABIWindowsService\appsettings.json.
   ໝາຍເຫດ: The start time for Dell Command Secure BIOS Configuration varies depending on the platforms—the maximum time limit is set to 2-3 minutes.

Configuring the Dell Command Secure BIOS Configuration Server using HTTPS

The Dell Command | Configure installer configures the Dell Command Secure BIOS Configuration Server for HTTP calls. For added security, you can also configure the Dell Command Secure BIOS Configuration Server using HTTPS on the system where Dell Command Secure BIOS Configuration is installed, by following these steps:

1. Press the Windows key and press the R key to launch the Run dialog box.
2. Type Services.msc and then press Enter to open Windows Services.
3. Locate Dell Secure Configuration Service.
4. Right-click Dell Secure Configuration Service, and click Stop.
5. Go to the Dell Command | Configure installation path C:\Program Files (x86)\Dell\Command
   Configure\ABIWindowsService\appsettings.json, and modify the appsettings.json file ມີດັ່ງຕໍ່ໄປນີ້:
   {
   “Logging”: {
   “LogLevel”: {
   “Default”: “Information”,
   “Microsoft.Hosting.Lifetime”: “Information”
   }
   },
   “Kestrel”: {
   “Endpoints”: {
   “HttpsInlineCertFile”: {
   “Url”: “< URL:Port>”,
   “ClientCertificateMode”: “AllowCertificate”,
   “Certificate”: {
   “Path”: “<Https certificate complete path>”,
   “Password”: “<Https Cert Password>”
   }
   }
   }
   }
   }
   ໝາຍເຫດ: The certificate to be provided must be associated to the Url specified in the same field. Also, specify the Client Certificate Modeas Allow Certificate to allow Dell Command Secure BIOS Configuration server to function without any issues. You must specify the complete Path for the Https certificate and the Password for authenticating the Https Certificate. The Password can be left empty if the Https certificate does not require a password authentication.
6. Save changes to the appsettings.json file and start the Dell Secure Configuration Service from Windows Services.
   ໝາຍເຫດ: There are other ways as well to configure an HTTPS Server. For more details, see Configure endpoints for the ASP.NET Core Kestrel web server and Client Certificate Mode Enum.

Dell Command | Configure for Windows Preinstallation Environment

Windows Preinstallation Environment (WinPe) provides a stand-alone preinstallation environment that is used to prepare a system for Windows installation. For client systems that do not have an operating system that is installed, you can create a bootable image that contains Dell Command | Configure to run the Dell Command | Configure commands on Windows PE. To create Windows PE 10.0, and Windows PE 11.0 images, you can use Windows Assessment and Deployment Kit (Windows ADK).

Using Windows PE 10.0, and Windows PE 11.0, you can integrate Dell Command | Configure.

ໝາຍເຫດ: Dell Command | Configure 5.x for Windows Preinstallation Environment is not compatible with ARM64-bit systems.

ການສ້າງສະພາບແວດລ້ອມການຕິດຕັ້ງຮູບພາບ bootable preinstallation ໂດຍໃຊ້ Windows PE 10.0 ແລະ 11.0

To create a bootable image using Windows PE 10.0 or 11.0, use the Windows ADK to generate a customized Windows PE environment, then add the necessary tools and drivers before creating a bootable ISO or USB. This environment supports preinstallation tasks such as BIOS configuration and OS deployment.

1. ຈາກ Microsoft webເວັບໄຊທ໌, ດາວໂຫລດແລະຕິດຕັ້ງ Windows ADK ໃນລະບົບລູກຄ້າ.
   ໝາຍເຫດ: ໃນຂະນະທີ່ຕິດຕັ້ງເລືອກເທົ່ານັ້ນ ເຄື່ອງມືການນຳໃຊ້ and Windows Preinstallation Environment (Windows PE).
2. From Support | Dell, download and install Dell Command | Configure.
3. ຕິດຕັ້ງ Dell Command | ຕັ້ງຄ່າ.
4. ປະສົມປະສານຄໍາສັ່ງ Dell | ຕັ້ງຄ່າໂຄງສ້າງໄດເລກະທໍລີເປັນ ISO file ເພື່ອສ້າງຮູບພາບ ISO ທີ່ສາມາດເລີ່ມຕົ້ນໄດ້.

ການເຊື່ອມໂຍງຄໍາສັ່ງ Dell | ຕັ້ງຄ່າໂຄງສ້າງໄດເລກະທໍລີເປັນ ISO file using Windows PE 10.0/11.0

To integrate the Dell Command | Configure directory into an ISO, copy it to the Windows PE working folder and create the Windows PE 10.0/11.0 image.

1. ຕິດຕັ້ງລະບົບປະຕິບັດການ Windows 11.
2. Download and install Windows ADK for Windows 10/11 operating system.
3. Create a Windows PE 10.0/11.0 image.

Creating a Windows PE 10.0/11.0 image

1. Browse to the following location:.
   ● For 32-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86.
   ● For 64-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86_64.
2. ເປີດພ້ອມຮັບຄໍາສັ່ງດ້ວຍສິດທິຂອງຜູ້ເບິ່ງແຍງລະບົບ.
3. Run the following command: .
   ● Windows PE 10.0
   ○ For 32-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   ● Windows PE 11.0
   ○ For 32-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   ໝາຍເຫດ: ໃຫ້ແນ່ໃຈວ່າເສັ້ນທາງທີ່ຖືກນໍາໃຊ້ໃນຄໍາສັ່ງແມ່ນຂອງ Dell Command | ຕັ້ງຄ່າໂຟນເດີ.
4. Copy the ISO image to the following location:
   ● For 32-bit systems, C:\winpe_x86\WIM.
   ● For 64-bit systems, C:\winpe_x86_64\WIM.

ຊັບພະຍາກອນແລະການສະຫນັບສະຫນູນ

ທ່ານສາມາດເຂົ້າເຖິງເອກະສານທີ່ຕ້ອງການໂດຍການເລືອກຜະລິດຕະພັນຂອງທ່ານ.

1. ໄປທີ່ ສະຫນັບສະຫນູນ | Dell.
2. ກົດ ຄົ້ນຫາຜະລິດຕະພັນທັງຫມົດ.
3. ກົດ Software & Solutions.
4. ກົດ ການຄຸ້ມຄອງລະບົບລູກຄ້າ.
5. ກົດ Dell Command | Configure.
6. ກົດ ເລືອກຜະລິດຕະພັນນີ້.
7. ເຖິງ view ເອກະສານທີ່ຕ້ອງການ, ໃຫ້ຄລິກໃສ່ຊື່ຜະລິດຕະພັນທີ່ຕ້ອງການແລະຈໍານວນສະບັບ.

ໝາຍເຫດ: ຖ້າ​ຫາກ​ທ່ານ​ບໍ່​ມີ​ການ​ເຊື່ອມ​ຕໍ່​ອິນ​ເຕີ​ເນັດ​ທີ່​ມີ​ການ​ເຄື່ອນ​ໄຫວ​, ທ່ານ​ສາ​ມາດ​ຊອກ​ຫາ​ຂໍ້​ມູນ​ຕິດ​ຕໍ່​ກ່ຽວ​ກັບ​ໃບ​ເກັບ​ເງິນ​ການ​ຊື້​ຂອງ​ທ່ານ​, ໃບ​ຫຸ້ມ​ຫໍ່​, ໃບ​ບິນ​, ຫຼື​ລາຍ​ການ​ຜະ​ລິດ​ຕະ​ພັນ Dell​.

Dell provides several online and telephone-based support and service options. Availability varies by country or region and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues:

1. ໄປທີ່ສະຫນັບສະຫນູນ | Dell.
2. ເລືອກປະເພດການຊ່ວຍເຫຼືອຂອງທ່ານ.
3. ກວດສອບປະເທດຫຼືພາກພື້ນຂອງທ່ານໃນ ເລືອກປະເທດ/ພາກພື້ນ ລາຍການແບບເລື່ອນລົງຢູ່ລຸ່ມສຸດຂອງ ໜ້າ.
4. ເລືອກການບໍລິການທີ່ເຫມາະສົມຫຼືການເຊື່ອມຕໍ່ສະຫນັບສະຫນູນໂດຍອີງໃສ່ຄວາມຕ້ອງການຂອງທ່ານ.