coolo Zigbee Smart Light Sensor User Manual

Coolo Zigbee Smart Light Sensor

ການຕັ້ງຄ່າເຄືອຂ່າຍ

1. ພະລັງງານໃນຜະລິດຕະພັນ
   • Align the opener to the slot
   • ໝຸນຝາແບັດເຕີລີຕາມເຂັມໂມງເພື່ອເປີດ
   • Remove the battery insulation film to power
2. ກົດປຸ່ມ RESET ສໍາລັບ 3s ແລະປ່ອຍ, LED ສີແດງຈະກະພິບສໍາລັບການຕັ້ງຄ່າເຄືອຂ່າຍ.

ຄໍາແນະນໍາການຕິດຕັ້ງ

ຕໍາແຫນ່ງການຕິດຕັ້ງ
Remove the protective film from the adhesive on the base. Stick the device where needed as shown in the following figure.

ກະລຸນາອ່ານຄູ່ມືຢ່າງລະອຽດແລະນໍາໃຊ້ຜະລິດຕະພັນຢ່າງຖືກຕ້ອງ
ຂອບໃຈສໍາລັບການຊື້asing and using this product. Before using the product, please read the manual carefully and use the product correctly. In order to avoid damage to the equipment, such as all consequences caused by abnormal operation, the company will not bear any responsibility. The pictures in this manual are used to guide the user’s operation and are for reference only. Please refer to the actual product for details.

ລາຍ​ລະ​ອຽດ​ຜະ​ລິດ​ຕະ​ພັນ​

ເຄັດລັບ:
This product must be connected to the Zigbee gateway to function properly and upload data to the server/APP

ຕົວກໍານົດການຜະລິດຕະພັນ

• Product Name Zigbee Ambient Light Sensor
• Wireless Protocol Zigbee 3.0
• Detection Range 0~157K Lux
• Battery TypeCR2450
• Standby Current<10uA
• Working Temperature -10 ~ 55 C
• Working Humidity 0% ~ 95%RH
• Product Size Ф 33×16mm