AtomStack F03-0329-0AA1 Swift
ຂໍ້ມູນຈໍາເພາະ
- ຊື່ຜະລິດຕະພັນ: AtomStack Swift
- ໝາຍເລກຕົວແບບ: F03-0329-0AA1
- ລຸ້ນ: B
- ການປ້ອນຂໍ້ມູນພະລັງງານ: DC 24V
- ພອດ: Type-C Port (For PC Connection), Expansion Port (for Chuck, Roller, and Other Accessories)
- ຕົວຊີ້ບອກສະຖານະ: Solid blue when working
ຄໍາແນະນໍາການນໍາໃຊ້ຜະລິດຕະພັນ
ລາຍການຊິ້ນສ່ວນ:
- ການປະກອບແກນ X
- Left Y-axis assembly (with motor)
- Right Y-axis assembly
- ອະແດັບເຕີພະລັງງານ
- Llave fija (Fixed wrench)
Getting to Know AtomStack Swift:
Familiarise yourself with the different assemblies and parts of the AtomStack Swift, including the X-axis assembly, left and right Y-axis assemblies, power adapter, and optical shaft.
How to Install Swift:
- Place the five assemblies as shown in the diagram. Ensure the X-axis assembly belt faces downward, and the Y-axis assembly with the motor is on the left.
- Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley. Ensure it is fully inserted and aligned parallel with the front X-axis assembly.
- If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.
ລາຍການຊິ້ນສ່ວນ
Getting to Know AtomStack Swift
How to install Swift
- Place the five assemblies as shown in the diagram.
ໝາຍເຫດ: The X-axis assembly should have the belt facing downward, and the Y-axis assembly with the motor should be on the left. - Align and connect the five assemblies, then secure them using six M5×8 screws.
- Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley.
(Ensure it is fully inserted and aligned parallel with the front X-axis assembly)
- Install the laser module and tighten the thumb knob.
ໝາຍເຫດ:
If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.
- Connect the motor cable, limit switch cables, and laser cable as shown in the diagram to complete the installation.
ວິທີການສຸມໃສ່:
Place the workpiece. Turn the focusing knob downward and loosen the thumb screw. Let the laser module drop until the knob touches the material. Tighten the screw to fix the module, then return the knob to its original position.
ເຄັດລັບ:
When placing the material, use the X/Y axis scale lines for alignment. When using “Absolute Coords” mode in the software, the design will align with the material’s position.
- If the engraving quality deteriorates after prolonged use, adjust the eccentric nuts with the open-end wrench to improve it.
- Use the open-end wrench to adjust the eccentric nuts on the left and right Y-axes.
- Adjust them so that when the machine is tilted at a 45° angle, as shown, the X-axis slides down slowly and evenly.
ATOMSTACK Official Recommended Software
Mobile App Download Method：
ວິທີການດາວໂຫຼດຊອບແວຄອມພິວເຕີ:
ລິ້ງດາວໂຫລດ AtomStack Studio: https://atomstack.com/pages/atomstack-studio-software
- Official Download Link
https://atomstack.com/pages/atomstack-studio-software - ສະແກນເພື່ອດາວໂຫລດ
ຊັບພະຍາກອນຊອບແວ
ແສງໄຟ
Unofficial software. Requires a separate purchase
ວິທີການດາວໂຫຼດຊອບແວ Lightburn: ການເຊື່ອມຕໍ່ດາວໂຫຼດ: https://lightburnsoftware.com/pages/download-trial
- Scan to download the configuration file “AtomStack_Swift_Vxxx.lbdev”
- ເປີດຊອບແວ LightBurn, ເລືອກ: ອຸປະກອນ – ນໍາເຂົ້າ
-
Select “AtomStack_Swift_Vxxx.lbdev”, click “Open”, then “OK”. In the bottom right corner, select “AtomStack Swift”.
The machine will beep once to confirm the connection.
ໝາຍເຫດ: If adding the device manually, set the “Baud Rate” in “Device Settings” to 460800
ຄູ່ມືຜູ້ໃຊ້
ຕິດຕໍ່ພວກເຮົາ
Scan the QR code for more information:
- Unboxing & First Use
- Use with the AtomStack APP
- ການແກ້ໄຂບັນຫາ
- ບໍາລຸງຮັກສາ
ບໍລິການລູກຄ້າ:
- For the detailed warranty policy, please visit our official webເວັບໄຊ: www.atomstack.com
- ສໍາລັບການຊ່ວຍເຫຼືອດ້ານວິຊາການແລະການບໍລິການ, ກະລຸນາສົ່ງອີເມວ: support@atomstack.com
ຜູ້ຜະລິດ:
Shenzhen AtomStack Technologies Co. , Ltd.
ລະຫັດໄປສະນີ: 518172
ທີ່ຢູ່:
ຊັ້ນ 17, ຕຶກ 3A, ໄລຍະ II, ສວນອັດສະລິຍະ, ເລກທີ່ 76, ຖະໜົນບ່າວເຮີ, ຖະໜົນບາວລອງ, ເມືອງລອງກວາງ, ນະຄອນເສິນເຊິນ, ແຂວງກວາງຕຸ້ງ, ຈີນ.
Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC60825-1 E, 3., as described in Laser Notice No.56, dated May 8, 2019.
FAQ
ຂ້ອຍຄວນເຮັດແນວໃດຖ້າຂ້ອຍພົບບັນຫາໃນລະຫວ່າງການຕິດຕັ້ງ?
If you face any difficulties during installation, refer to the video tutorial available on the official webສະຖານທີ່ຫຼືຕິດຕໍ່ສະຫນັບສະຫນູນລູກຄ້າສໍາລັບການຊ່ວຍເຫຼືອ.
ເອກະສານ / ຊັບພະຍາກອນ
 |
ATOMSTACK F03-0329-0AA1 AtomStack Swift [pdf] ຄູ່ມືຜູ້ໃຊ້ F03-0329-0AA1, A5 V3, F03-0329-0AA1 AtomStack Swift, F03-0329-0AA1, AtomStack Swift, Swift |