EUHOMY CM002 Espresso Machine with Grinder Instruction Manual

ຜະ​ລິດ​ຕະ​ພັນ​ທົ່ວ​ໄປ​view

The EUHOMY CM002 Espresso Machine with Grinder is designed for home use, offering professional-grade coffee preparation. It features an integrated grinder with 30 adjustable grind levels, a powerful 20-bar pressure pump for optimal extraction, and a rapid 1500W heating system. The machine includes a 58mm commercial portafilter and PID temperature control for consistent brewing. A professional steam wand allows for silky microfoam, enabling the creation of various barista-style drinks like lattes and cappuccinos. Its smart touch screen and easy-to-clean design ensure convenience and durability.

ຮູບ 1: ເກີນview of the EUHOMY CM002 Espresso Machine with Grinder.

ຕັ້ງຄ່າ

Unpacking and Included Components

ຄ່ອຍໆແກະສ່ວນປະກອບທັງໝົດອອກຈາກກ່ອງ. ໃຫ້ແນ່ໃຈວ່າມີລາຍການຕໍ່ໄປນີ້:

• ເຄື່ອງກາເຟ Espresso
• 58mm Portafilter
• Tamper
• ເຕົ້ານົມສະແຕນເລດ
• ກະຕ່າກອງຝາດຽວ ແລະ ຄູ່ 1 ແລະ 2 ຖ້ວຍ
• ເຂັມເຮັດຄວາມສະອາດສຳລັບຫົວສີດໄອນ້ຳ
• ແປງລ້າງ

Water Tank Installation and Filling

Locate the removable water tank at the back of the machine. Lift the lid or remove the entire tank to fill it with fresh, cold water. Do not exceed the 'MAX' fill line. Reinsert the water tank securely into its position.

Figure 2: The removable water tank and drip tray for easy access.

Bean Hopper and Grind Setting

Place fresh coffee beans into the bean hopper located on top of the machine. Adjust the grind setting by rotating the hopper. The machine offers 30 adjustable grind levels, from fine for espresso to coarse for drip coffee. For optimal espresso, a fine grind is typically recommended.

Figure 3: The bean hopper with 30 grind level settings.

ເປີດເຄື່ອງ

Plug the machine into a suitable power outlet. Press the power button to turn on the machine. Allow a few seconds for the machine to preheat the water to the optimal brewing temperature.

ຄໍາແນະນໍາການດໍາເນີນງານ

ກາເຟບົດ

Insert the portafilter into the grinding cradle. Select your desired grind amount (single or double) using the control panel. Press the grind button to dispense freshly ground coffee into the portafilter. The upgraded anti-clogging chute ensures smooth operation.

Figure 4: The smart touch screen control panel for grinding and brewing.

Preparing the Portafilter

Once the coffee is ground into the portafilter, use the included tamper to press the grounds firmly and evenly. This creates a compact puck, essential for proper espresso extraction.

Figure 5: The 58mm portafilter and tamper, among other accessories.

Brewing Espresso Shots

Securely attach the prepared portafilter to the brew head. Place your espresso cup(s) on the drip tray beneath the portafilter. Select either the single or double espresso button on the control panel. The machine will automatically extract the espresso using 20-bar pressure and PID temperature control for a rich, full-bodied shot with consistent crema.

Figure 6: Espresso extraction showing rich crema.

Frothing ນົມ

Fill the stainless steel milk jug with cold milk. Turn the steam knob on the side of the machine to activate the steam wand. Immerse the steam wand tip just below the surface of the milk. Angle the jug to create a vortex, frothing the milk until it reaches your desired texture and temperature. Turn the steam knob off when finished.

Figure 7: Using the professional steam wand to froth milk.

Official Product Video: Master the Art of Espresso

Video 1: This video from ProvonicaTech demonstrates the process of making espresso and frothing milk with the machine, highlighting key features for professional home brewing.

ບໍາລຸງຮັກສາ

Cleaning the Drip Tray and Water Tank

The drip tray and water tank are detachable for easy cleaning. Regularly empty and wash these components with warm, soapy water. Rinse thoroughly and dry before reassembling.

Figure 8: The removable drip tray and water tank facilitate easy cleaning.

ທໍາຄວາມສະອາດ Steam Wand

After each use, purge the steam wand briefly to clear any milk residue. Wipe the wand with a damp cloth immediately to prevent milk from drying and clogging the nozzle. Use the provided cleaning needle if the nozzle becomes blocked.

ການເສື່ອມເສຍ

Regular descaling is crucial to maintain machine performance and extend its lifespan. Follow the descaling instructions provided in the full user manual, typically using a descaling solution and running it through the machine's brew and steam systems.

ການແກ້ໄຂບັນຫາ

Espresso Not Brewing

• ກວດສອບວ່າຖັງນໍ້າຖືກຕື່ມເຕັມ ແລະ ວາງໄວ້ຢ່າງຖືກຕ້ອງແລ້ວ.
• Ensure the portafilter is securely locked into the brew head.
• Verify that the machine has completed its preheating cycle.

Weak Espresso or Excessive Flow

• Adjust the grind setting to a finer consistency.
• Increase the amount of coffee grounds in the portafilter.
• Ensure the coffee grounds are tamped firmly and evenly.

Milk Not Frothing Properly

• Ensure the steam wand is clean and not clogged.
• Use fresh, cold milk with adequate fat content for best results.
• Allow the machine to fully heat up before frothing.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and customer support, please refer to the detailed warranty card included in your product packaging or visit the official EUHOMY website. Contact customer service for any technical assistance or service inquiries.