1. ຄໍາແນະນໍາຄວາມປອດໄພທີ່ສໍາຄັນ
Please read all instructions carefully before using the Morpilot Milk Frother HS010-S. Retain this manual for future reference.
- ຢ່າຈຸ່ມຫົວ ໜ່ວຍ ພື້ນຖານລົງໃນນໍ້າຫຼືຂອງແຫຼວອື່ນໆ.
- ຮັບປະກັນການສະຫນອງພະລັງງານ voltage matches the rating label on the frother.
- ຫ້າມໃຊ້ອຸປະກອນທີ່ມີສາຍໄຟ ຫຼືປລັກສຽບເສຍຫາຍ.
- ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
- Use only the frother jug and whisk attachments provided with the unit.
- ຫຼີກເວັ້ນການສໍາຜັດກັບພາກສ່ວນທີ່ເຄື່ອນຍ້າຍ.
- Do not fill above the maximum fill line indicated inside the jug.
- Always ensure the frother jug is properly seated on the base before operation.
2. ຜະລິດຕະພັນເກີນview
The Morpilot Stainless Steel Milk Frother HS010-S is designed to create hot or cold milk foam for various beverages. It features a stainless steel jug and an induction heating base.
ຮູບທີ 1: Morpilot Stainless Steel Milk Frother HS010-S. This image displays the complete milk frother unit, including the black base with control buttons, the stainless steel jug with a handle, two whisk attachments (one for frothing, one for heating), and a small cleaning brush. A cup of frothed coffee and coffee beans are also visible in the foreground.
ອົງປະກອບ:
- Induction Base: ປະກອບດ້ວຍອົງປະກອບຄວາມຮ້ອນແລະແຜງຄວບຄຸມ.
- ໂຖນ້ຳສະແຕນເລດ: Removable jug for milk, with a handle and pour spout.
- Frothing Whisk: Used for creating thick foam.
- ເຄື່ອງຕີຄວາມຮ້ອນ: Used for heating milk with minimal foam.
- ແປງລ້າງ: For maintaining the frother.
3. ຕັ້ງຄ່າ
- ແກະກ່ອງ: ເອົາສ່ວນປະກອບທັງຫມົດອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ.
- ສະອາດ: Before first use, wash the stainless steel jug and whisk attachments with warm soapy water. Rinse thoroughly and dry. Wipe the exterior of the induction base with a damp ຜ້າ. ຢ່າ immerse ຖານໃນນ້ໍາ.
- ການຈັດວາງ: Place the induction base on a stable, flat, heat-resistant surface.
- ການເຊື່ອມຕໍ່ພະລັງງານ: ສຽບສາຍໄຟໃສ່ບ່ອນສຽບໄຟຟ້າທີ່ມີດິນ.
4. ຄໍາແນະນໍາການດໍາເນີນງານ
4.1 Choosing the Whisk
- For Frothing (Hot or Cold): Use the frothing whisk (with the spring coil).
- For Heating Milk (Minimal Foam): Use the heating whisk (flat whisk).
Insert the desired whisk onto the pin at the bottom of the jug before adding milk.
4.2 Adding Milk
- Pour fresh, cold milk into the jug.
- Observe the internal fill lines:
- MAX FROTH: Do not exceed this line when frothing milk (approx. 150ml).
- ຄວາມຮ້ອນສູງສຸດ: Do not exceed this line when only heating milk (approx. 300ml).
- ນາທີ: Always fill at least to the minimum line (approx. 75ml).
Using whole milk (3.5% fat) typically yields the best frothing results.
4.3 ການເລືອກໂປຣແກຣມ
Place the jug onto the induction base. The control panel on the base features several illuminated icons. Press the power button (⏻) to activate the frother, then select your desired function:
- ໂຟມຮ້ອນໜາແໜ້ນ: ກົດປຸ່ມກັບ cup with three wavy lines icon. Ideal for cappuccinos.
- ໂຟມຮ້ອນທີ່ມີລົມພັດຜ່ານ: ກົດປຸ່ມກັບ cup with two wavy lines icon. Suitable for lattes.
- Hot Milk (No Foam): ກົດປຸ່ມກັບ solid cup icon. Use the heating whisk for best results.
- ໂຟມເຢັນ: ກົດປຸ່ມກັບ ໄອຄອນ snowflake. The milk will be frothed without heating.
The selected program's indicator light will illuminate. The frother will automatically stop when the program is complete.
4.4 After Frothing
- Carefully remove the jug from the base.
- Pour the frothed milk into your beverage.
- Clean the jug and whisk immediately after use to prevent milk residue from drying.
5. ການທໍາຄວາມສະອາດແລະບໍາລຸງຮັກສາ
ການທຳຄວາມສະອາດເປັນປະຈຳຮັບປະກັນປະສິດທິພາບທີ່ດີທີ່ສຸດ ແລະ ຍືດອາຍຸການໃຊ້ງານຂອງເຄື່ອງເຮັດຟອງຂອງທ່ານ.
- ຖອດປລັກ: ຕ້ອງຖອດປລັກເຄື່ອງຟອກອອກຈາກປລັກໄຟກ່ອນທຳຄວາມສະອາດສະເໝີ.
- ເຢັນລົງ: ປ່ອຍໃຫ້ຟອງເຢັນລົງໝົດກ່ອນເຮັດຄວາມສະອາດ.
- Jug and Whisk: Remove the whisk from the jug. Wash the stainless steel jug and whisk attachments with warm soapy water using a soft sponge or the provided cleaning brush. Rinse thoroughly and dry immediately. The jug and whisks are dishwasher safe (top rack only).
- ຫົວໜ່ວຍພື້ນຖານ: Wipe the exterior of the induction base with a soft, damp cloth. Do not use abrasive cleaners or scourers. Never immerse the base unit in water or any other liquid.
- ການເກັບຮັກສາ: ເກັບຮັກສາເຄື່ອງເຮັດຟອງໄວ້ໃນບ່ອນທີ່ສະອາດ ແລະ ແຫ້ງ ເມື່ອບໍ່ໄດ້ໃຊ້ງານ.
6. ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Frother ບໍ່ເປີດ. | Not plugged in; power outlet not working; frother not properly seated on base. | Check power connection; try a different outlet; ensure jug is correctly placed on the base. |
| Milk not frothing or heating properly. | Incorrect whisk used; milk level too high/low; milk type unsuitable; whisk not properly attached. | Ensure correct whisk is used for desired function; check milk fill lines; use fresh, cold whole milk; ensure whisk is securely attached to the pin. |
| Burning smell or milk sticking to bottom. | Milk residue from previous use; jug not clean. | Clean the jug thoroughly after each use. Do not exceed MAX fill lines. |
| Frother stops unexpectedly. | ເປີດໃຊ້ການປ້ອງກັນຄວາມຮ້ອນເກີນແລ້ວ. | Unplug the unit and allow it to cool down for at least 10 minutes before reuse. |
7. ຂໍ້ມູນຈໍາເພາະ
- ຕົວແບບ: HS010-S
- ຍີ່ຫໍ້: Morpilot
- ວັດສະດຸ: ສະແຕນເລດ
- ຂະໜາດ: 20.5 x 14.5 x 14.5 cm (ຂະຫນາດປະມານຊຸດ)
- ນ້ຳໜັກ: 950 g (approximate item weight)
- UPC: 810206591185
- Max Frothing Capacity: 150ml
- Max Heating Capacity: 300ml
8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Morpilot provides a standard manufacturer's warranty for this product. For detailed warranty information, product support, or to report any issues, please contact Morpilot customer service through their official webເວັບໄຊທ໌ຫຼືຮ້ານຂາຍຍ່ອຍບ່ອນທີ່ຜະລິດຕະພັນໄດ້ຖືກຊື້.
Please have your model number (HS010-S) and proof of purchase ready when contacting support.
Webເວັບໄຊ: www.morpilot.com
