ຄູ່ມືການໃຊ້ງານເຄື່ອງເຮັດຄວາມຮ້ອນຝາຜະໜັງ Stelpro ທີ່ງຽບສະຫງົບສູງສຸດ ASHC0502WCW

1. ບົດແນະນຳ

This manual provides essential information for the safe installation, operation, and maintenance of your Stelpro Ultra-Quiet Wall Convector Heater, model ASHC0502WCW. Please read these instructions thoroughly before installation and retain them for future reference. This heater is designed to provide supplemental heat for small indoor spaces.

2. ຂໍ້ມູນຄວາມປອດໄພ

WARNING: Risk of electric shock. Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.

• ເຄື່ອງເຮັດຄວາມຮ້ອນນີ້ຖືກອອກແບບມາສຳລັບ hardwired connection only. It is not a plug-in unit.
• ໜ່ວຍນີ້ does not include a built-in thermostat. An external electronic wall thermostat (sold separately) is required for operation. Mechanical thermostats are not compatible.
• Ensure the power supply is disconnected at the circuit breaker before attempting any installation, maintenance, or wiring.
• Do not install the heater near flammable materials, curtains, or furniture. Maintain adequate clearance as specified in installation guidelines.
• Do not insert foreign objects into any ventilation or exhaust opening as this may cause electric shock, fire, or damage to the heater.
• ເຄື່ອງເຮັດຄວາມຮ້ອນນີ້ຮ້ອນເມື່ອໃຊ້. ເພື່ອຫຼີກເວັ້ນການບາດແຜ, ບໍ່ໃຫ້ຜິວຫນັງເປົ່າແຕະພື້ນຜິວຮ້ອນ.
• Do not use this heater in wet or moist locations unless specifically rated for such environments.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ອົງ​ປະ​ກອບ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ກ່ອນ​ທີ່​ຈະ​ເລີ່ມ​ຕົ້ນ​ການ​ຕິດ​ຕັ້ງ​:

• Stelpro Wall Convector Heater Unit (ASHC0502WCW)
• ວົງເລັບຕິດຕັ້ງ
• ຮາດແວການຕິດຕັ້ງ (ສະກູ, ສະມໍ)
• ຄູ່ມືການສອນ

ຮູບພາບ 1: ມຸມດ້ານໜ້າ view of the Stelpro Ultra-Quiet Wall Convector Heater.

4. ຂໍ້ມູນຈໍາເພາະ

ຮູບພາບ 2: ຂ້າງ view of the heater showing its compact dimensions: 17 9/16" H x 17 5/16" W x 3 15/16" D.

5. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

The Stelpro ASHC0502WCW heater is designed for surface-mount wall installation with a concealed bracket for a clean finish. It requires a 240V or 208V hardwired electrical connection and an external electronic wall thermostat.

5.1 ລາຍການກວດກ່ອນການຕິດຕັ້ງ

• Ensure the power supply is OFF at the main circuit breaker.
• Confirm you have an appropriate electronic wall thermostat (not included).
• Gather necessary tools: drill, screwdriver, wire strippers, level, measuring tape.
• Select a suitable wall location, ensuring proper clearances from floors, ceilings, and adjacent walls as per local codes and the heater's specifications.

5.2 ການຕິດຕັ້ງເຄື່ອງເຮັດຄວາມຮ້ອນ

1. ເອົາເຄື່ອງເຮັດຄວາມຮ້ອນອອກຈາກເຄື່ອງຫຸ້ມຫໍ່ຂອງມັນຢ່າງລະມັດລະວັງ.
2. Detach the mounting bracket from the back of the heater.
3. Position the mounting bracket on the wall at the desired height, ensuring it is level. Mark the screw hole locations.
4. Drill pilot holes if necessary and secure the mounting bracket to the wall using the provided hardware. Ensure it is firmly attached.
5. The heater features a back entry plate with cable clamps ສໍາລັບສາຍໄຟ.

Image 3: Illustration of the concealed mounting bracket system for secure and discreet installation.

5.3 ການເຊື່ອມຕໍ່ໄຟຟ້າ

IMPORTANT: All wiring must comply with the National Electrical Code (NEC) and local codes. Consult a qualified electrician if you are unsure about any part of the wiring process.

1. Route the 240V or 208V electrical supply wires to the heater's junction box located at the back entry plate.
2. Connect the heater's wires to the supply wires according to the wiring diagram provided in the full installation guide (refer to the diagram on the heater or in the included manual). Typically, this involves connecting the two hot wires and the ground wire.
3. Secure all connections with appropriate wire connectors.
4. Ensure all wiring is neatly tucked into the junction box and the cover is securely fastened.

Image 4: Visual representation of the 240V hardwired connection required for the heater.

5.4 Finalizing Installation

1. Carefully hang the heater unit onto the mounted bracket, ensuring it clicks securely into place.
2. Install your electronic wall thermostat according to its specific instructions.
3. Once the heater and thermostat are fully installed and all connections are secure, restore power at the circuit breaker.

Image 5: The Stelpro convector heater seamlessly installed on a wall in a home office environment.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

Since the Stelpro ASHC0502WCW heater does not have a built-in thermostat, its operation is entirely controlled by the external electronic wall thermostat you have installed.

1. ເປີດ: After installation, ensure the circuit breaker supplying power to the heater is in the 'ON' position.
2. ການຄວບຄຸມເຄື່ອງຄວບຄຸມອຸນຫະພູມ: Adjust the desired temperature setting on your electronic wall thermostat. The heater will activate when the room temperature falls below the set point and deactivate when it reaches the set point.
3. ການດໍາເນີນງານງຽບ: This convector heater operates silently, providing natural convection heat without a fan.

7. ບໍາລຸງຮັກສາ

Regular maintenance ensures optimal performance and longevity of your heater. Always disconnect power at the circuit breaker before performing any maintenance.

• ທໍາຄວາມສະອາດ: ເຊັດດ້ານນອກຂອງເຄື່ອງເຮັດຄວາມຮ້ອນເປັນໄລຍະໆດ້ວຍຜ້າອ່ອນໆ, ເຊັດໃຫ້ແຫ້ງ.amp cloth. Do not use abrasive cleaners, solvents, or spray directly onto the heater.
• ການກຳຈັດຂີ້ຝຸ່ນ: Use a vacuum cleaner with a brush attachment to remove dust from the air intake and discharge grilles. Ensure these areas remain clear for proper airflow.
• ການກວດກາ: Annually inspect the heater for any signs of damage, loose connections, or unusual wear. If any issues are found, contact a qualified electrician or Stelpro support.

8. ການແກ້ໄຂບັນຫາ

If your heater is not functioning as expected, consult the following common issues before contacting support.

If troubleshooting steps do not resolve the issue, please contact Stelpro customer support or a qualified electrician.

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Your Stelpro Ultra-Quiet Wall Convector Heater ASHC0502WCW is backed by a comprehensive warranty:

• ຮັບປະກັນ 5 ປີຈໍາກັດ on the overall unit.
• ການຮັບປະກັນຕະຫຼອດຊີວິດ ກ່ຽວກັບອົງປະກອບຄວາມຮ້ອນ.
• ຮັບປະກັນ 3 ປີ on electronic components.

For warranty claims, technical assistance, or further support, please visit the official Stelpro webເວັບໄຊ ຫຼືຕິດຕໍ່ພະແນກບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮັບປະກັນຄວາມຖືກຕ້ອງ.

ສະແຕນໂປ Webເວັບໄຊ: www.stelpro.com