1. ຜະລິດຕະພັນເກີນview
This manual provides essential information for the safe assembly, operation, and maintenance of your Intex 26769EH Prism Frame Clearview Rectangular Above Ground Swimming Pool Set. Please read all instructions carefully before setup and retain this manual for future reference.
The Intex Prism Frame Clearview pool offers a unique swimming experience with its integrated vertical windows, allowing for underwater visibility. It features a robust frame structure and a durable liner designed for extended use.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ:
- ຈະແຈ້ງview Windows: Elegant vertical windows provide captivating underwater views.
- ການກໍ່ສ້າງທົນທານ: Features powder-coated metal frames and a 3-ply material liner for stability and strength.
- ສະພາແຫ່ງງ່າຍດາຍ: Designed for quick setup, ready for water in approximately 45 minutes after ground preparation.
- Puncture-Resistant Liner: Made with 3-Ply PVC material to resist wear and tear. A patch is included for minor repairs.
- ກອບທີ່ທົນທານຕໍ່ກັບສະນິນ: Composite T-Joints create a water-tight seal, preventing internal rust and ensuring long service life.
- Krystal Clear Filtration: Includes a 1500 GPH cartridge filter pump with HydroAeration Technology for improved circulation, filtration, and water clarity.

Image 1.1: The Intex Prism Frame Clearview Rectangular Pool set up in a backyard, showcasing its design and clear windows.
2. ຄໍາແນະນໍາຄວາມປອດໄພທີ່ສໍາຄັນ
Failure to follow these instructions can result in serious injury or death. Always ensure proper supervision and adherence to all safety guidelines.
- ການເບິ່ງແຍງຜູ້ໃຫຍ່: Constant and competent adult supervision is required at all times. Never leave children unattended in or near the pool.
- ຫ້າມດຳນ້ຳ ຫຼື ກະໂດດ: This is an above-ground pool. Do not dive or jump into the pool, as this can lead to serious injury, paralysis, or death.
- ສິ່ງກີດຂວາງສະລອຍນໍ້າ: Install fencing or approved barriers around the pool to prevent unsupervised access by children. Check local regulations for barrier requirements.
- ຄວາມປອດໄພທາງໄຟຟ້າ: Keep all electrical cords, including the pump's, away from the pool area. Ensure the pump is connected to a Ground Fault Circuit Interrupter (GFCI) outlet.
- ການຈັດການທາງເຄມີ: Store pool chemicals safely, out of reach of children and pets. Follow manufacturer instructions for chemical dosage and application.
- ການກຽມພ້ອມສຸກເສີນ: Keep emergency equipment, such as a life ring or rescue pole, readily accessible. Have a phone nearby to call for help in an emergency.
- Clear Pool Area: Ensure the area around the pool is clear of obstacles and tripping hazards.
- ຄວາມອາດສາມາດນ້ໍາຫນັກ: Do not exceed the recommended number of occupants or weight capacity for the pool.
3. ເນື້ອໃນຊຸດ
Verify that all components listed below are present and undamaged before beginning assembly. If any parts are missing or damaged, contact Intex customer service.
- Pool Liner with Clearview Windows
- Powder-Coated Steel Frame Components (Horizontal Beams, Vertical Legs, T-Joints)
- Krystal Clear Cartridge Filter Pump (1500 GPH)
- ຜ້າພື້ນ
- ການປົກຫຸ້ມຂອງສະນຸກເກີ
- ຂັ້ນໄດດ້ານຄວາມປອດໄພ
- ຄູ່ມືການສອນ
- ສ້ອມແປງຊຸດ Patch

ຮູບພາບ 3.1: ຫຼາຍກວ່າview of the main components included in your pool set.
4. ການຕິດຕັ້ງແລະການປະກອບ
Proper site preparation and careful assembly are crucial for the stability and longevity of your pool.
4.1 ການກະກຽມສະຖານທີ່
- ເລືອກສະຖານທີ່ລະດັບ: Select a firm, level area in your yard. The ground must be completely flat to prevent uneven water distribution and stress on the pool structure.
- ລຶບລ້າງພື້ນທີ່: Remove all sharp objects, debris, rocks, and roots from the chosen site.
- Install Ground Cloth: Spread the included ground cloth over the prepared area. This protects the bottom of the pool liner from punctures.
4.2 ການປະກອບກອບ
- ເປີດເຜີຍ Liner: Carefully unfold the pool liner onto the ground cloth, ensuring the clear windows are positioned as desired.
- Assemble Horizontal Beams: Connect the horizontal beams using the composite T-Joints. Ensure all connections are secure.
- Attach Vertical Legs: Insert the vertical support legs into the T-Joints and the corresponding slots on the pool liner.
- ກອບທີ່ປອດໄພ: Ensure all frame components are fully engaged and locked into place. The powder-coated steel tubing provides enhanced support.
- ລຽບນຽນ: Once the frame is assembled, gently pull the liner outwards to remove any wrinkles from the bottom.

Image 4.1: A family engaged in the assembly process of the pool frame.
Video 4.2: An official Intex video demonstrating the features and setup of the Prism Frame Clearview Rectangular Pool.
5. ປະຕິບັດການສະນຸກເກີຂອງທ່ານ
5.1 ການເຕີມສະນຸກເກີ
- ການຕື່ມຂໍ້ມູນເບື້ອງຕົ້ນ: Begin filling the pool with water. As the water level rises, continue to smooth out any remaining wrinkles in the liner bottom.
- ກວດສອບການຮົ່ວໄຫລ: Monitor for any leaks during the initial filling process. If leaks are detected, stop filling and address the issue.
- Fill to Recommended Level: Fill the pool to the water line indicated on the liner or to approximately 6 inches (15 cm) below the top edge of the pool.
5.2 ການເຮັດວຽກຂອງປໍ້າການກັ່ນຕອງ
The included Krystal Clear Cartridge Filter Pump is essential for maintaining water clarity and hygiene.
- ເຊື່ອມຕໍ່ປັ໊ມ: Follow the separate pump instruction manual for connecting the hoses and electrical supply. Ensure all connections are tight.
- Prime Pump: Before starting, ensure the pump is primed according to its specific instructions to remove air from the system.
- ການດໍາເນີນງານປະຈໍາວັນ: Run the filter pump for a minimum of 4-6 hours daily to ensure adequate water circulation and filtration. The exact duration may vary based on usage and environmental conditions.
- ເຕັກໂນໂລຊີ HydroAeration: The pump incorporates HydroAeration Technology, which enhances water quality by improving circulation and increasing ໄອອອນລົບ.

Image 5.1: The filter pump connected and operating, ensuring clean pool water.
6. Pool Maintenance
Regular maintenance is vital for safe and enjoyable pool use.
6.1 ຄຸນະພາບນໍ້າ
- Test Water Regularly: Use a pool test kit to check pH, chlorine, and alkalinity levels at least 2-3 times per week.
- Adjust Chemicals: Add appropriate pool chemicals as needed to maintain balanced water chemistry. Follow chemical manufacturer guidelines.
- ການປິ່ນປົວອາການຊ໊ອກ: Periodically shock the pool water to eliminate bacteria and algae, especially after heavy use or rain.
6.2 ການເຮັດຄວາມສະອາດສະລອຍນໍ້າ
- Skim Surface: Use a skimmer net daily to remove leaves, insects, and other debris from the water surface.
- Vacuum Pool: Vacuum the pool bottom regularly to remove settled debris.
- Clean Filter Cartridge: Rinse the filter cartridge with a garden hose every few days. Replace the cartridge every 2-4 weeks, depending on usage.
- Wipe Liner: Periodically wipe down the pool liner, including the clear windows, to prevent algae buildup.
6.3 ການເກັບຮັກສາໃນລະດູໜາວ (ການເກັບຮັກສານອກລະດູການ)
- Drain Pool: Completely drain the pool water using the drain plug.
- ສະອາດ ແລະແຫ້ງ: Thoroughly clean the pool liner and frame components. Ensure all parts are completely dry to prevent mold and mildew.
- Disassemble: Carefully disassemble the frame and liner.
- ເກັບຮັກສາຢ່າງຖືກຕ້ອງ: Store the liner and frame components in a dry, protected area, away from extreme temperatures and pests.
7. ການແກ້ໄຂບັນຫາທົ່ວໄປ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ນ້ຳມີເມກ | ການກັ່ນຕອງບໍ່ພຽງພໍ; ການດຸ່ນດ່ຽງທາງເຄມີທີ່ບໍ່ເຫມາະສົມ; ການໂຫຼດອາບສູງ. | Run pump longer; backwash/clean filter; test and adjust chemicals; shock pool. |
| ການຂະຫຍາຍຕົວຂອງພຶຊະຄະນິດ | chlorine ຕ່ໍາ; pH ສູງ; ການໄຫຼວຽນບໍ່ດີ. | Shock pool; adjust pH; ensure pump runs adequately; brush pool walls. |
| ປັ໊ມບໍ່ແລ່ນ | No power; clogged impeller; air in system. | Check power connection/GFCI; clear impeller; prime pump. |
| ລະດັບນ້ຳຫຼຸດລົງ | ການລະເຫີຍ; ຮົ່ວຢູ່ໃນເສັ້ນຫຼືການເຊື່ອມຕໍ່. | Normal evaporation; check for visible leaks; use included repair patch for liner. |
| Frame unstable | Uneven ground; improper assembly. | Drain pool and re-level ground; re-check all frame connections. |
8. ຂໍ້ມູນຈໍາເພາະຂອງຜະລິດຕະພັນ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ໝາຍເລກຕົວແບບ | 26769EH |
| ຂະໜາດ (L x W x H) | 158"L x 79"W x 48"H (13ft 1.5in x 6ft 6.75in x 48in) |
| ຄວາມອາດສາມາດຂອງນ້ໍາ | 2224 ກາລອນ |
| ຮູບຮ່າງ | ຮູບສີ່ຫລ່ຽມ |
| ສີ | ສີເທົາ |
| ວັດສະດຸ | Vinyl (3-Ply PVC Liner), Powder-Coated Steel Frame |
| Filter Pump ອັດຕາການໄຫຼ | 1500 GPH (ກາລອນຕໍ່ຊົ່ວໂມງ) |
| ຕ້ອງການສະພາແຫ່ງ | ແມ່ນແລ້ວ |
| ການນຳໃຊ້ພາຍໃນ/ນອກ | ກາງແຈ້ງ |
| ນ້ໍາຫນັກລາຍການ | 183.6 ປອນ |
| UPC | 078257267699 |
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນລູກຄ້າ
Intex products are manufactured with high-quality materials and workmanship. All Intex products have been inspected and found free of defects prior to leaving the factory. Intex warrants this product against defects in materials and workmanship for a period of one (1) year from the date of retail purchase.
This warranty does not cover defects resulting from negligence, misuse, accident, improper operation, improper maintenance, or storage. It also does not cover damage due to acts of nature, such as storms, floods, or freezing temperatures.
For warranty claims, technical assistance, or to order replacement parts, please contact Intex Customer Service directly. Have your product model number (26769EH) and proof of purchase readily available.
ເຂົ້າເບິ່ງ Intex ຢ່າງເປັນທາງການ website or refer to the contact information provided in your product packaging for the most current customer support details.





