ຄູ່ມືການໃຊ້ງານ Silverlit Flybotic Drone Air Vision HD

1. ບົດແນະນຳ

Welcome to the world of aerial exploration with your new Silverlit Flybotic Drone Air Vision HD. This foldable drone is equipped with an HD camera, real-time Wi-Fi video feedback to your smartphone, and an integrated obstacle detector for a secure and enjoyable flight experience. This manual will guide you through the setup, operation, and maintenance of your drone.

The drone features automatic takeoff and landing, hover mode for stability, and comes with two rechargeable batteries for extended flight time. Its foldable design and included carrying pouch make it highly portable.

2. ຂໍ້ມູນຄວາມປອດໄພ

WARNING: Not suitable for children under 36 months. Contains small elements that may be swallowed.

• Always operate the drone in open, unobstructed areas, away from people and animals.
• ໃຫ້ແນ່ໃຈວ່າແບັດເຕີຣີຂອງໂດຣນ ແລະ ແບັດເຕີຣີຂອງຣີໂມດຄວບຄຸມໄດ້ຖືກສາກໄຟເຕັມກ່ອນການບິນແຕ່ລະຄັ້ງ.
• ຫ້າມບິນໂດຣນໃນເວລາທີ່ມີລົມແຮງ ຫຼື ສະພາບອາກາດທີ່ບໍ່ດີ.
• ຮັກສານິ້ວມື ແລະ ຜົມໃຫ້ຫ່າງຈາກພັດລົມທີ່ໝູນວຽນ.
• ອ່ານ ແລະ ເຂົ້າໃຈຄຳແນະນຳທັງໝົດກ່ອນທີ່ຈະໃຊ້ໂດຣນ.

3. ສິ່ງທີ່ຢູ່ໃນກ່ອງ

• Flybotic Drone Air Vision HD
• ຄວບຄຸມໄລຍະໄກ
• 2 Rechargeable Drone Batteries
• ກະເປົາຖື
• ສາຍສາກ USB
• ອາໄຫຼ່ Propellers
• ກອງໂຄສະນາ
• ໄຂຄວງ

Product packaging for the Flybotic Drone Air Vision HD, detailing key features and included accessories.

4. ຕັ້ງຄ່າ

4.1 Unboxing & Initial Inspection

Carefully remove all components from the packaging. Inspect the drone and accessories for any signs of damage.

The Flybotic Drone Air Vision HD, shown with its foldable design, remote controller, and a smartphone mounted for live video feed.

4.2 Battery Charging & Installation

• ເຊື່ອມຕໍ່ແບັດເຕີຣີຂອງໂດຣນເຂົ້າກັບສາຍສາກໄຟ USB.
• Plug the USB cable into a 5V/2A power adapter (not included). The indicator light on the cable will show charging status (e.g., red for charging, green for full).
• Once fully charged, insert the battery into the drone's battery compartment.
• The remote controller requires 3xAA batteries (not included). Open the battery compartment on the back of the controller and insert the batteries, ensuring correct polarity.

4.3 Propeller Guard Installation/Removal

To install propeller guards, slide the curved surface of the guard upwards under the drone's motor. Position the guard onto the locking tabs at the base of the motor and apply slight upward pressure to securely clip it in place. To remove, press down on the guard near the motor base to release the clips.

4.4 Propeller Installation/Removal

To remove a propeller, hold the drone's motor firmly and use the provided screwdriver to unscrew the retaining screw. Carefully lift the propeller off. To install, ensure you match the propeller type (A or B) to the corresponding arm (A or B) marked on the drone. Place the propeller onto the motor shaft, insert the screw, and tighten it with the screwdriver, holding the motor in place.

4.5 ການດາວໂຫຼດ ແລະ ການເຊື່ອມຕໍ່ແອັບ

Download the dedicated drone application from your smartphone's app store. Power on the drone and the remote controller. Connect your smartphone to the drone's Wi-Fi network (usually named after the drone model). Launch the app to view the live video feed and access additional controls.

4.6 Pairing & Calibration

Place the drone on a flat, level surface. Power on the drone and then the remote controller. The indicator lights on both devices will flash. Briefly press the 'One-Touch Calibration' button on the remote. The remote will beep, and the drone's lights will flash rapidly, indicating successful calibration. To unlock the drone, push the left joystick to the 7 o'clock position and the right joystick to the 5 o'clock position simultaneously. The propellers will start spinning slowly, indicating the drone is unlocked and ready for flight. To disable unlocking, push the left joystick all the way down.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

5.1 Automatic Takeoff & Landing

After successful pairing and calibration, press the 'Automatic Takeoff/Landing' button on the remote controller. The drone will automatically ascend to approximately 1 meter and hover. To land, press the same button again, and the drone will gently descend and land.

5.2 Manual Takeoff & Landing

After unlocking the drone (propellers spinning slowly), gently push the left joystick upwards to make the drone ascend. To land manually, pull the left joystick downwards until the drone lands and the propellers stop spinning.

5.3 ການຄວບຄຸມທິດທາງ

• Joystick ຊ້າຍ: ຄວບຄຸມລະດັບຄວາມສູງ (ຂຶ້ນ/ລົງ) ແລະອ່າວ (ໝຸນຊ້າຍ/ຂວາ).
• Joystick ຂວາ: ຄວບຄຸມການເຄື່ອນໄຫວໄປໜ້າ/ຫຼັງ ແລະ ການຍິງດ້ວຍລູກປືນໄປທາງຊ້າຍ/ຂວາ.

5.4 ການ​ປັບ​ຄວາມ​ໄວ​

The drone has multiple speed settings. Press the speed adjustment button (usually located on the top left of the remote) to cycle through different speed modes (e.g., low, medium, high). The remote will emit a corresponding number of beeps to indicate the current speed mode.

5.5 ແບບບໍ່ມີຫົວ

To activate headless mode, press and hold the headless mode button on the remote until it beeps and a blue light on the drone's rear flashes. In headless mode, the drone's orientation is fixed relative to the remote controller, making it easier to control regardless of which way the drone is facing. For example, pushing the right joystick forward will always make the drone fly away from you.

5.6 3D Flip/Roll

To perform a 3D flip, press the '3D Flip' button (usually on the top right of the remote). The remote will beep. Then, push the right joystick in the desired direction (forward, backward, left, or right) to execute the flip. The drone will perform a 360-degree roll in that direction.

5.7 ການເຮັດວຽກຂອງກ້ອງຖ່າຍຮູບ (ຮູບພາບ/ວິດີໂອ)

Ensure a Micro SD card (up to 32GB, not included) is inserted into the remote controller for photo and video storage. To take a photo, briefly press the 'Photo' button. The screen will display 'Photo taken successfully'. To record a video, briefly press the 'Video Record' button. The screen will display 'Recording in progress'. Press the button again to stop recording.

5.8 ການປັບມຸມກ້ອງ

The drone's HD camera angle can be adjusted directly from the remote controller. Use the camera up/down buttons (usually located on the top right side of the remote) to tilt the camera up or down, allowing you to capture different perspectives during flight.

5.9 Viewing Photos & Videos

ເຖິງ view captured media, press and hold the 'Photo File' button to enter photo viewing mode. Use the 'Previous File' and 'Next File' buttons to navigate through your photos. Similarly, press and hold the 'Video File' button to enter video viewing mode. Select a video and press the 'Play/Pause' button to watch it. Press and hold the 'Home' button to exit file viewຮູບແບບການນໍາເຂົ້າ.

5.10 Intelligent Obstacle Avoidance

The drone is equipped with an integrated obstacle detector. This feature helps prevent collisions by automatically adjusting the drone's flight path when obstacles are detected, making it safer for beginners.

5.11 ການບິນ Trajectory

Using the companion app, you can draw a flight path on your smartphone screen. The drone will then automatically follow this trajectory, allowing for pre-planned and precise flight routes.

5.12 Optical Flow Positioning

The optical flow positioning system provides enhanced flight stability, especially during hovering. It uses a downward-facing camera to detect ground patterns and maintain a stable position, resulting in smoother and more controlled flight.

6. ບໍາລຸງຮັກສາ

• Clean the drone and remote controller with a soft, dry cloth after each use.
• Avoid exposing the drone to water or extreme temperatures.
• Store the drone in its carrying pouch in a cool, dry place when not in use.
• Remove batteries from the remote controller if storing for extended periods.

7. ການແກ້ໄຂບັນຫາ

• Drone ບໍ່ຕອບສະໜອງ: ໃຫ້ແນ່ໃຈວ່າທັງໂດຣນ ແລະ ຣີໂໝດໄດ້ເປີດ ແລະ ຈັບຄູ່ສຳເລັດແລ້ວ. ກວດສອບລະດັບແບັດເຕີຣີ.
• ຖ້ຽວບິນບໍ່ໝັ້ນຄົງ: Perform calibration on a flat surface. Check for damaged propellers and replace if necessary.
• ບໍ່ມີຟີດວິດີໂອ: Ensure your smartphone is connected to the drone's Wi-Fi network and the app is open. Check camera connection.
• ເວລາບິນສັ້ນ: ໃຫ້ແນ່ໃຈວ່າແບັດເຕີຣີຖືກສາກໄຟເຕັມແລ້ວ. ເວລາບິນອາດຈະໄດ້ຮັບຜົນກະທົບຈາກສະພາບລົມ ແລະ ການບິນທີ່ຮຸນແຮງ.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະ ໜັບ ສະ ໜູນ

For warranty information, technical support, or to purchase replacement parts, please refer to the full product manual included in the box or visit the official Silverlit website. Contact details for customer service can typically be found on the product packaging or the manufacturer's webເວັບໄຊ.