ແນະນຳ
The COROS Bike Cadence Sensor is designed to help cyclists track their pedaling RPMs (revolutions per minute) to improve pedaling efficiency. This sensor is compatible with both outdoor and indoor rides, including most spin bikes, and pairs seamlessly with bike computers, smartwatches, or smartphones via Bluetooth connectivity.
ແມ່ນຫຍັງຢູ່ໃນກ່ອງ
ເມື່ອເປີດຊຸດ, ທ່ານຈະພົບເຫັນອົງປະກອບດັ່ງຕໍ່ໄປນີ້:
- COROS Bike Cadence Sensor
- ເຊັນເຊີ Mount
- Rubber Bands for mounting
- ຄູ່ມືເລີ່ມຕົ້ນດ່ວນ
- ຂໍ້ມູນຄວາມປອດໄພຂອງຜະລິດຕະພັນ
ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
1. ການຕິດຕັ້ງຫມໍ້ໄຟ
The COROS Bike Cadence Sensor uses a CR2032 coin cell battery. Ensure the battery is correctly inserted before use. The battery compartment is typically located on the back of the sensor.
2. ການຕິດຕັ້ງເຊັນເຊີ
The sensor is designed for easy installation on your bike's crank arm. Use the provided rubber bands to securely attach the sensor. Position the sensor on the non-drive side crank arm for optimal cadence tracking.
3. ການຈັບຄູ່ກັບອຸປະກອນ
The COROS Bike Cadence Sensor connects via Bluetooth. To pair, activate the sensor by rotating the crank arm a few times. Then, open the settings on your compatible bike computer, smartwatch, or smartphone application and search for new Bluetooth devices. Select the COROS Cadence Sensor from the list to establish a connection. The sensor is not compatible with ANT+ devices.
ຄໍາແນະນໍາການດໍາເນີນງານ
Once paired, the sensor will automatically begin tracking your pedaling RPMs when you start cycling. This data is transmitted in real-time to your connected device, allowing you to monitor and optimize your pedaling efficiency. The sensor works effectively for both outdoor rides and indoor training sessions, including use with most spin bikes.
ບໍາລຸງຮັກສາ
ຊີວິດຫມໍ້ໄຟແລະການທົດແທນ
The CR2032 battery in your COROS Bike Cadence Sensor is designed to last up to 12 months under typical usage conditions. When the battery level is low, your connected device may display a notification. To replace the battery, carefully open the battery compartment, remove the old battery, and insert a new CR2032 battery with the positive (+) side facing up. Ensure the compartment is sealed tightly after replacement.
ການທໍາຄວາມສະອາດແລະການຕໍ່ຕ້ານນ້ໍາ
The sensor has an IP67 water rating, providing protection against dust and temporary immersion in water. This makes it suitable for all-weather protection and durability. To clean the sensor, wipe it with a damp ຜ້າ. ຫຼີກເວັ້ນການນໍາໃຊ້ສານເຄມີທີ່ຮຸນແຮງຫຼືວັດສະດຸຂັດທີ່ອາດຈະທໍາລາຍອຸປະກອນ.
ການແກ້ໄຂບັນຫາ
- ເຊັນເຊີບໍ່ໄດ້ເຊື່ອມຕໍ່: Ensure the sensor has a fresh battery and is properly activated by rotating the crank arm. Check that Bluetooth is enabled on your receiving device and that the sensor is within range.
- ການອ່ານທີ່ບໍ່ຖືກຕ້ອງ: Verify that the sensor is securely mounted on the crank arm and is not obstructed. Ensure there are no strong electromagnetic interferences nearby.
- ການລະບາຍຫມໍ້ໄຟຢ່າງໄວວາ: Confirm that the sensor is not left in an active state when not in use. Replace the battery if it is old or if the issue persists.
ຂໍ້ມູນຈໍາເພາະ
| ຍີ່ຫໍ້ | COROS |
| ຊື່ຕົວແບບ | COROS Bike Cadence Sensor |
| ສີ | ດຳ |
| ປະເພດເຊັນເຊີ | ເຊັນເຊີ Cadence |
| ເຕັກໂນໂລຊີການເຊື່ອມຕໍ່ | Bluetooth (Not compatible with ANT+ devices) |
| ປະເພດການຕິດຕັ້ງ | Crank Arm Mount |
| ປະເພດຫມໍ້ໄຟ | CR2032 ລິທຽມ ແມງການີສ ໄດອອກໄຊດ໌ |
| ຊີວິດຫມໍ້ໄຟ | ເຖິງ 12 ເດືອນ |
| ລະດັບນໍ້າ | IP67 |
| ນ້ຳໜັກ | 11g |
| ຂະໜາດລາຍການ (LxWxH) | 3.94 x 3.94 x 3.94 ນິ້ວ |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
The COROS Bike Cadence Sensor comes with a 1-year manufacturer's warranty. For technical support, warranty claims, or additional product information, please visit the official COROS webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮັບປະກັນຄວາມຖືກຕ້ອງ.
