ຄູ່ມືການໃຊ້ງານ ECOWITT GW3010 Wi-Fi ແລະ Ethernet Gateway

ແນະນຳ

This manual provides detailed instructions for the setup, operation, and maintenance of your ECOWITT GW3010 Wi-Fi and Ethernet Gateway. The GW3010 is designed to connect various Ecowitt weather sensors to the internet, allowing you to monitor environmental data remotely. It features integrated 3-in-1 sensors for temperature, humidity, and barometric pressure, along with an SD card port for data logging.

ເນື້ອໃນຊຸດ

ກະ​ລຸ​ນາ​ກວດ​ສອບ​ວ່າ​ອົງ​ປະ​ກອບ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ກ່ອນ​ທີ່​ຈະ​ສືບ​ຕໍ່​ການ​ຕັ້ງ​ຄ່າ​.

• ECOWITT GW3010 Gateway Unit
• ເສົາອາກາດ RF
• USB Power Cable (0.85m) with Type-C interface
• Temperature and Humidity Probe (integrated with power cable)
• Ethernet Cable (optional, for LAN connection)
• ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)

ສິນຄ້າເກີນview

The ECOWITT GW3010 Gateway serves as the central hub for your Ecowitt weather monitoring system. It collects data from various external sensors and uploads it to the Ecowitt cloud system via Wi-Fi or Ethernet.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• Integrated 3-in-1 Sensors: Measures indoor temperature, humidity, and barometric pressure.
• ຂອບເຂດ RF ທີ່ຂະຫຍາຍອອກ: Equipped with a 0.85m cable for improved detection range and stability. External weather sensors can reach up to 350 meters in open spaces, while WH51/WN34 sensors can reach up to 220 meters.
• ການເຊື່ອມຕໍ່ຄູ່: Supports both Wi-Fi and Ethernet connections for flexible network integration.
• ພອດ SD Card: Allows for local data storage and backup with user-selectable intervals (1 to 240 minutes). Supports FAT32 file ລະບົບ.
• Wide Sensor Compatibility: Connects with a broad range of existing Ecowitt sensors (sold separately), including WS90/WS85/WS69/WS68/WS80 external sensors, WH31/WN30/WN34/WN36/WH55/WN35, WH51A/L/AC.1100/WFC01, WH45/WH57/WH40/WH32/WH46, and WH55.
• ການ​ຕັ້ງ​ຄ່າ​ງ່າຍ​ດາຍ​: Can be set up via an integrated web page, the Ecowitt App, or the WS View Plus App. Ethernet connection offers plug-and-play setup.

ຄໍາແນະນໍາການຕິດຕັ້ງ

1. Powering On the Gateway

1. Connect the RF antenna to the designated port on the GW3010 Gateway.
2. Plug the USB power cable into the Type-C port on the gateway.
3. Connect the other end of the USB cable to a 5V DC power adapter (not included) or a USB port.
4. The gateway will power on, and the status lights will indicate its initial state.

2. ການເຊື່ອມຕໍ່ເຄືອຂ່າຍ

The GW3010 supports both Wi-Fi and Ethernet connections. Choose the method that best suits your network environment.

Ethernet Connection (Recommended for simplicity):

1. Connect one end of an Ethernet cable (not included) to the Ethernet port on the GW3010 Gateway.
2. ເຊື່ອມຕໍ່ປາຍອີກດ້ານໜຶ່ງຂອງສາຍ Ethernet ເຂົ້າກັບພອດ LAN ທີ່ມີຢູ່ໃນເຣົາເຕີຂອງທ່ານ.
3. The gateway will automatically connect to your network. No further Wi-Fi configuration is required.

ການເຊື່ອມຕໍ່ Wi-Fi:

1. Ensure the gateway is powered on.
2. ດາວ​ນ​໌​ໂຫລດ​ແລະ​ຕິດ​ຕັ້ງ​ ແອັບ Ecowitt or WS View ແອັບບວກ ໃນໂທລະສັບສະຫຼາດຂອງທ່ານ.
3. Follow the in-app instructions to add a new device and configure the Wi-Fi settings for the GW3010. The app will guide you through connecting the gateway to your local Wi-Fi network.
4. Alternatively, you can access the gateway's integrated web page for Wi-Fi setup once it's connected to your local network. Refer to the app's documentation for specific steps.

3. ການຈັດວາງທີ່ດີທີ່ສຸດ

For best performance, place the GW3010 Gateway and its RF antenna in an open area, away from large metal objects or other electronic devices that may cause interference. Maintain a distance of at least 50 cm between the gateway and its antenna for optimal signal reception.

ຄໍາແນະນໍາການດໍາເນີນງານ

1. Connecting External Sensors

The GW3010 Gateway can connect to a wide range of Ecowitt external sensors (sold separately) to expand your weather monitoring capabilities.

• Ensure your external sensors are powered on and within the GW3010's RF reception range.
• The gateway will automatically detect and connect to compatible sensors.
• Use the Ecowitt App or WS View Plus App to manage and view data from connected sensors.
• Supported sensors include: WS90/WS85/WS69/WS68/WS80 (external weather stations), WH31/WN30/WN34/WN36/WH55/WN35 (temperature/humidity/soil moisture sensors), WH51A/L/AC.1100/WFC01 (leaf wetness/water leak/soil moisture sensors), WH45/WH57/WH40/WH32/WH46 (PM2.5/lightning/rain/wind sensors).

2. Data Monitoring and Cloud System

Once connected to the internet, the GW3010 will upload sensor data to the Ecowitt cloud system.

• Access your data through the Ecowitt App or the Ecowitt webເວັບໄຊ.
• View real-time data, historical graphs, and receive alerts based on your configured settings.
• The integrated 3-in-1 sensors provide indoor temperature, humidity, and barometric pressure readings directly from the gateway.

3. SD Card Data Logging

The GW3010 features an SD card slot for local data storage.

• Insert a Micro SD card (FAT32 format) into the Micro SD slot on the gateway.
• The system monitors the SD card status in real-time.
• Data logging intervals can be configured from 1 to 240 minutes via the app or web ການໂຕ້ຕອບ.
• You can insert or remove the SD card without restarting the device.
• Files on the SD card can be downloaded or deleted individually.

ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: Wipe the gateway unit with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• ການອັບເດດເຟີມແວ: Periodically check the Ecowitt App or website for firmware updates to ensure optimal performance and access to new features. Follow the provided instructions for updating the firmware.
• ການຄຸ້ມຄອງບັດ SD: Regularly back up data from the SD card to prevent data loss. Ensure the SD card is properly formatted (FAT32) for compatibility.
• ຣີເຊັດອຸປະກອນ: If the device is unresponsive or experiencing issues, you can perform a factory reset using the reset button. Refer to the Troubleshooting section for more details.

ການແກ້ໄຂບັນຫາ

• ບໍ່ມີພະລັງງານ:
  • Ensure the USB power cable is securely connected to both the gateway and a working 5V DC power source.
  • ລອງໃຊ້ອະແດັບເຕີໄຟ ຫຼືພອດ USB ອື່ນ.
• No Network Connection (Wi-Fi/Ethernet):
  • ອີເທີເນັດ: Verify the Ethernet cable is properly connected to both the gateway and your router. Check your router's status.
  • Wi-Fi: Ensure the Wi-Fi network name (SSID) and password entered during setup are correct. Make sure the gateway is within range of your Wi-Fi router. Restart your router and the gateway.
  • Check the WiFi Status Light on the gateway for connection status.
• ເຊັນເຊີບໍ່ເຊື່ອມຕໍ່:
  • Ensure external sensors are powered on and have fresh batteries.
  • Verify sensors are within the GW3010's RF reception range.
  • Check the RF Status Light on the gateway for sensor communication.
  • Try repositioning the gateway or sensors for better signal.
• Data Not Uploading to Cloud:
  • Confirm the gateway has an active internet connection (check network connection steps above).
  • Ensure your Ecowitt account is properly linked in the app.
• ບັນຫາບັດ SD:
  • Ensure the SD card is formatted to FAT32.
  • Check if the SD card is inserted correctly.
  • Try a different SD card if issues persist.
• ປັບຄ່າໂຮງງານ:
  • Locate the "Reset" button on the gateway (refer to Figure 1).
  • Use a small pin or paperclip to press and hold the reset button for approximately 10 seconds until the status lights change, indicating a reset.
  • ຄຳເຕືອນ: A factory reset will erase all network settings and sensor pairings. You will need to reconfigure the gateway after a reset.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Information regarding specific warranty terms is not provided in the product details. For warranty claims, technical support, or further assistance, please contact ECOWITT customer service directly or visit their official webເວັບໄຊ.

• ຜູ້ຜະລິດ: ECOWITT
• Webເວັບໄຊ: www.ecowitt.com (ກະລຸນາກວດສອບເຈົ້າຫນ້າທີ່ website for the most up-to-date support information.)