uwant Wet Dry Vacuum Cleaner D600 Instruction Manual

1. ບົດແນະນຳ

The uwant Wet Dry Vacuum Cleaner D600 is an all-in-one cleaning solution designed for hard floors. It combines vacuuming and mopping functionalities, featuring advanced self-cleaning, odor removal, and efficient drying capabilities. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new appliance.

2. ຄຸນນະສົມບັດທີ່ສໍາຄັນ

• UWANT Push-in Design: Effortlessly docks into the base station for convenient storage and charging without leaving water marks.
• Triple Odor Removal: Features dual odor-removal sticks to keep water odor-free for up to 7 days and an IPX6+ washable roller brush with 100℃ hot water and air sterilization.
• Smart RGB Self-Cleaning Base Station: Provides one-stop cleaning with color-coded lights for dust cleaning (green), deep cleaning (blue), UV-C sterilization (purple), and infrared-assisted hot air drying (red).
• Lower than 13cm Lay-Flat: Designed to reach under low furniture like sofas and beds, ensuring no missed spots.
• 23000Pa Strong Suction with 3 Modes: Includes Smart Cleaning Mode (AI-adjusted suction), MAX mode (for tough stains), and Dry mode (for dry debris without water).
• Triple Water Levels and 50-Minute Runtime: Offers three water levels for different cleaning needs and a long-lasting battery for up to 280㎡ coverage. Its 3-side design cleans close to walls.
• 0 Gravity Handle: Ergonomically designed for easy operation with minimal wrist strain, adapting to different heights and angles.

3. ສິ່ງທີ່ຢູ່ໃນກ່ອງ

Your uwant D600 package includes the following components:

• uwant Wet Dry Vacuum Cleaner D600 main unit
• Self-cleaning base station
• ອະແດັບເຕີພະລັງງານ
• 2 x Roller brushes (one pre-installed, one spare)
• 2 x HEPA filters (one pre-installed, one spare)
• ການແກ້ໄຂການທໍາຄວາມສະອາດ
• ແປງລ້າງ
• ຄູ່ມືຜູ້ໃຊ້

Figure 1: uwant D600 Wet Dry Vacuum Cleaner and included accessories.

4. ຕັ້ງຄ່າ

1. ປະກອບມືຈັບ: ສຽບມືຈັບເຂົ້າໄປໃນຕົວເຄື່ອງດູດຝຸ່ນຫຼັກຂອງເຄື່ອງດູດຝຸ່ນຈົນກ່ວາມັນກົດເຂົ້າໄປໃນສະຖານທີ່ຢ່າງປອດໄພ.
2. Place the Base Station: Position the self-cleaning base station on a flat, dry surface near a power outlet.
3. ເຊື່ອມຕໍ່ພະລັງງານ: Plug the power adapter into the base station and then into a wall outlet.
4. ໄລ່ໜ່ວຍ: Place the vacuum cleaner onto the base station. The push-in design allows for easy docking. The unit will begin charging automatically.
5. ຕື່ມໃສ່ຖັງນ້ໍາສະອາດ: Remove the clean water tank from the main unit. Fill it with clean water and add the recommended amount of uwant Deep Cleaning Solution (30ml per 1 liter of water). Reattach the tank securely.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

ເປີດ/ປິດ ແລະເລືອກໂໝດ

• ເປີດ: Press and hold the power button on the handle to turn on the vacuum cleaner.
• ການເລືອກໂໝດ: Use the mode button to cycle through Smart Cleaning Mode, MAX mode, and Dry mode. The digital display will indicate the current mode.
• ປິດພະລັງງານ: ກົດປຸ່ມເປີດປິດຄ້າງໄວ້ເພື່ອປິດອຸປະກອນ.

ການປັບລະດັບນໍ້າ

The vacuum cleaner offers three water levels to suit different cleaning needs:

• ນ້ໍາຕ່ໍາ: Ideal for light dust, hair, and minor puddles on wooden floors.
• Medium Water: Suitable for tile and hard floors, effectively clearing food debris and daily messes.
• High Water: Provides maximum power for dried spills, sauces, and stuck-on grime.

Figure 2: Three adjustable water levels for varied cleaning tasks.

Lay-Flat and Edge Cleaning

• ການອອກແບບ 180° Lay-Flat: The vacuum can lay almost completely flat (lower than 13cm) to easily clean under furniture.
• ການທໍາຄວາມສະອາດສາມຂອບ: The unique design allows for thorough cleaning along walls and into corners, leaving no dirt behind.

Figure 3: The 180° lay-flat design allows access to low-clearance areas.

Figure 4: The 3-edge design ensures thorough cleaning along edges and corners.

6. ບໍາລຸງຮັກສາ

Smart RGB Self-Cleaning Base Station

After each use, return the vacuum cleaner to its base station. The Smart RGB Self-Cleaning Base Station will automatically initiate a cleaning cycle for the roller brush and internal components. The process involves four stages indicated by different light colors:

• ແສງສີຂຽວ: Basic dust cleaning.
• ແສງສີຟ້າ: Deep cleaning of the roller.
• ແສງສີມ່ວງ: UV-C sterilization.
• ໄຟແດງ: Infrared-assisted hot air drying (100℃) for 100% dry and clean results.

Figure 5: The base station's RGB lights indicate the self-cleaning stage.

Cleaning the Dirty Water Tank and Roller Brush

• Empty Wastewater: Regularly empty the dirty water tank. The integrated deodorizer stick helps keep the wastewater odor-free for up to 7 days.
• ລ້າງອົງປະກອບ: The roller brush and its motor are IPX6+ waterproof, allowing for direct rinsing under water to prevent bacteria buildup. The base station tray is also removable for easy cleaning.

Figure 6: The triple odor removal system includes deodorizer sticks and a washable roller brush.

7. ການແກ້ໄຂບັນຫາ

• ປະສິດທິພາບທໍາຄວາມສະອາດບໍ່ດີ: Ensure the clean water tank is filled with water and cleaning solution. Check if the dirty water tank is full and needs emptying. Clean the roller brush and filter regularly.
• ກິ່ນເໝັນ: Utilize the deodorizer sticks in the dirty water tank. Ensure the roller brush and all removable parts are thoroughly cleaned and dried after use. Run the full self-cleaning cycle with hot air drying.
• ການດູດຊຶມຫຼຸດລົງ: Check for blockages in the suction path or the roller brush area. Ensure the filter is clean and properly installed.
• ແບັດເຕີຣີບໍ່ໄດ້ສາກ: Verify that the vacuum cleaner is correctly docked in the base station and the power adapter is securely plugged into a working outlet.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະ ໜັບ ສະ ໜູນ

The uwant Wet Dry Vacuum Cleaner D600 comes with a 1-Year Whole Machine Warranty. For any inquiries or assistance, 7×24 hour after-sales service is provided to offer round-the-clock support.

10. ວິດີໂອຜະລິດຕະພັນ