1. ຜະລິດຕະພັນເກີນview
This manual provides comprehensive instructions for the installation, operation, and maintenance of your BONTEC Full Motion TV Wall Mount, Model CT140L-FBA. This mount is designed to securely hold 26-65 inch flat and curved screens, offering extensive adjustability for optimal viewing.
ຄຸນນະສົມບັດທີ່ສໍາຄັນປະກອບມີ:
- Ultra-Long Extension: Extends from 2.9 inches to 37.4 inches from the wall.
- ຄວາມເຂົ້າກັນໄດ້ທົ່ວໂລກ: Supports VESA patterns from 200x200mm to 400x400mm and TVs weighing up to 77 lbs (35 kg).
- Full Motion Adjustment: Allows for +5°/-10° tilt, ±90° swivel, and ±4° leveling.
- ການກໍ່ສ້າງໜ້າວຽກໜັກ: Built from reinforced steel with a three-section five-arm structure for stability.
- ການຈັດການສາຍໄຟແບບປະສົມປະສານ: Includes cable ties to keep wires organized.
2. ຂໍ້ມູນຄວາມປອດໄພ
WARNING: Read all instructions carefully before installation. Incorrect assembly or installation may result in serious injury or damage.
- Ensure the mounting surface can safely support the combined weight of the mount and your TV.
- This mount is designed for installation on concrete walls, brick walls, or wooden stud walls. ຫ້າມຕິດຕັ້ງໃສ່ຝາຜະໜັງແຫ້ງພຽງຢ່າງດຽວ.
- Always use appropriate safety equipment, such as eye protection, during installation.
- ຖ້າທ່ານບໍ່ແນ່ໃຈກ່ຽວກັບສ່ວນໃດສ່ວນໜຶ່ງຂອງຂະບວນການຕິດຕັ້ງ, ໃຫ້ປຶກສາຜູ້ຊ່ຽວຊານທີ່ມີຄຸນວຸດທິ.
- ຮັກສາເດັກນ້ອຍແລະສັດລ້ຽງຢູ່ຫ່າງຈາກພື້ນທີ່ເຮັດວຽກໃນລະຫວ່າງການຕິດຕັ້ງ.
3. ເນື້ອໃນຊຸດ
Verify that all components are present before beginning installation. Refer to the included hardware bag for specific screw sizes and quantities.
ເນື້ອໃນຊຸດປົກກະຕິປະກອບມີ:
- ແຜ່ນຕິດຝາ
- TV Bracket Arms
- Mounting Hardware (screws, anchors, washers for various TV and wall types)
- ລະດັບຟອງ
- ສາຍເຄເບີ້ນ (5 ອັນ)
- ຄູ່ມືການສອນ
4. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ຍີ່ຫໍ້ | BONTEC |
| ໝາຍເລກຕົວແບບ | CT140L-FBA |
| ຂະໜາດໂທລະພາບທີ່ເຂົ້າກັນໄດ້ | 26-65 ນິ້ວ |
| ຄວາມອາດສາມາດນ້ໍາຫນັກສູງສຸດ | 77 lbs (35 ກິໂລ) |
| ຄວາມເຂົ້າກັນໄດ້ຂອງ VESA | 200x200mm ຫາ 400x400mm |
| ສ່ວນຂະຫຍາຍຈາກ Wall | 2.9 ນິ້ວ (ຖອດ) ຫາ 37.4 ນິ້ວ (ຂະຫຍາຍ) |
| ມຸມອຽງ | +5° / -10° |
| ມຸມຫມຸນ | ±90° |
| ການປັບລະດັບ | ±4° |
| ວັດສະດຸ | ເຫຼັກເສີມ |
| ສີ | ດຳ |
5. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Before you begin, ensure you have the necessary tools: a drill, stud finder (for wood studs), pencil, measuring tape, and a hammer (for concrete/brick anchors). A bubble level is included with the mount.
5.1. Wall and TV Compatibility Check
Confirm your TV's VESA pattern and weight are within the mount's specifications. The mount supports VESA patterns from 200x200mm to 400x400mm and a maximum weight of 77 lbs. This mount is compatible with concrete, brick, and wooden stud walls. Do not install on drywall alone.
This image illustrates the wide compatibility of the mount with various wall types (concrete, wood stud, brick) and VESA patterns, indicating a maximum load capacity of 77 lbs. It explicitly warns against mounting on drywall alone.
5.2. ຂັ້ນຕອນການຕິດຕັ້ງ
For a detailed visual guide, please watch the official installation video below.
Official BONTEC CT140L Installation Guide video. This video provides step-by-step visual instructions for mounting the TV bracket to the wall and attaching the TV.
- Configure and Assemble Monitor Plate: Depending on your TV's VESA pattern, assemble the monitor plate using the provided screws (M-A/B/C/D/E/F) and arms (E, F).
- Attach VESA Plate to the Back of Your TV: Secure the assembled VESA plate to the back of your TV using the appropriate screws (M-G/H or M-I/J/K) and washers. Ensure a snug fit.
- Secure the Wall Plate to the Wall:
- For Wooden Stud Walls: Use a stud finder to locate the center of a wooden stud. Mark the drilling points using the wall plate as a template. Drill pilot holes and secure the wall plate using the provided lag bolts and washers.
- For Brick or Concrete Walls: Mark the drilling points. Drill holes using a masonry drill bit. Insert the concrete anchors flush with the wall. Secure the wall plate using the provided lag bolts and washers. Avoid drilling into mortar lines between bricks.
- Hang the TV onto the Wall Plate: Carefully lift your TV with the attached VESA plate and hook it onto the wall plate. Secure the TV to the mount using the safety screws or locking mechanism.
6. ຄໍາແນະນໍາການດໍາເນີນງານ
Your BONTEC Full Motion TV Wall Mount offers versatile adjustments for optimal viewຈາກຕໍາແຫນ່ງຕ່າງໆ.
6.1. Adjusting Tilt, Swivel, and Level
- ອຽງ: The mount allows for a tilt range of +5° (upward) to -10° (downward). Use the tool-free tilt mechanism to adjust the vertical viewມຸມ ing.
- ໝູນ: The articulating arm allows for a ±90° swivel, enabling you to turn your TV left or right to suit your viewຕໍາແຫນ່ງ.
- ລະດັບ: If your TV is not perfectly level after installation, you can adjust it by ±4° using the leveling screws on the TV plate.
This image demonstrates the tilt (+5°/-10°) and level (±4°) adjustment features of the full motion TV mount, allowing for flexible screen positioning.
This image illustrates the ±90° swivel function of the mount, highlighting its ability to provide optimal viewການວັດແທກມຸມຈາກຈຸດຕ່າງໆພາຍໃນຫ້ອງ.
6.2. ການຄຸ້ມຄອງສາຍໄຟ
Use the included cable ties to route and secure your TV cables along the articulating arms. This helps maintain a tidy appearance and prevents cables from getting tangled or damaged during adjustments.
This image highlights key design elements of the mount, including the tool-free tilt mechanism, heavy-duty square tube construction, integrated Velcro cable organizer, and smooth brass washers for fluid movement.
Official BONTEC CT140L Product Showcase video. This video demonstrates the various features and movements of the TV wall mount, including extension, swivel, and cable management.
7. ບໍາລຸງຮັກສາ
ການບໍາລຸງຮັກສາເປັນປົກກະຕິຮັບປະກັນອາຍຸຍືນແລະການດໍາເນີນງານທີ່ປອດໄພຂອງເຄື່ອງຕິດຝາໂທລະພາບຂອງທ່ານ.
- ທໍາຄວາມສະອາດ: ເຊັດຕົວຍຶດດ້ວຍຜ້າອ່ອນໆ, ແຫ້ງເພື່ອເອົາຝຸ່ນອອກ. ຫຼີກລ້ຽງການເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
- ກວດສອບເປັນໄລຍະ: Annually, check all screws and bolts to ensure they are securely tightened. Over time, vibrations or frequent adjustments can cause fasteners to loosen.
- ການລະບາຍສີ: The mount features smooth brass washers for durable adjustments. No additional lubrication is typically required.
8. ການແກ້ໄຂບັນຫາ
If you encounter any issues with your BONTEC TV Wall Mount, refer to the following common problems and solutions:
| ບັນຫາ | ການແກ້ໄຂທີ່ເປັນໄປໄດ້ |
|---|---|
| ໂທລະພາບບໍ່ແມ່ນລະດັບຫຼັງຈາກການຕິດຕັ້ງ. | Use the ±4° level adjustment feature on the TV plate to correct the angle. |
| ຮູ້ສຶກວ່າຕົວຍຶດວ່າງ ຫຼື ບໍ່ໝັ້ນຄົງ. | Re-check all wall mounting bolts and TV attachment screws to ensure they are securely tightened. Verify the wall type is appropriate for installation. |
| ມີຄວາມຫຍຸ້ງຍາກໃນການປັບຄວາມອຽງ ຫຼື ໝຸນ. | Ensure no cables are obstructing movement. Check for any debris in the joints. The mount is designed for smooth movement; excessive force should not be necessary. |
| ສ່ວນທີ່ຂາດຫາຍໄປ. | Contact BONTEC customer support for assistance. |
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Your BONTEC TV Wall Mount is covered by a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official BONTEC webເວັບໄຊສໍາລັບເງື່ອນໄຂການຮັບປະກັນລາຍລະອຽດ.
For technical support, replacement parts, or any questions regarding your product, please contact BONTEC customer service through their official channels. Contact information can typically be found on the product packaging or the BONTEC webເວັບໄຊ.