1. ບົດແນະນຳ
This instruction manual provides comprehensive guidance for the proper setup, operation, maintenance, and troubleshooting of your HOBBYWING QUICRUN 16BL30 G2 Electronic Speed Controller (ESC) and 2435SL 4500KV Brushless Motor Combo. Please read this manual thoroughly before using the product to ensure optimal performance and safety.
2. ຜະລິດຕະພັນເກີນview
2.1 ເນື້ອໃນຊຸດ
- 1 x HOBBYWING QUICRUN 16BL30 G2 Electronic Speed Controller (ESC)
- 1 x HOBBYWING QUICRUN 2435SL 4500KV Brushless Motor
2.2 ລັກສະນະທີ່ສໍາຄັນ
- Optimized for 1/16 & 1/18 On-road & Off-Road RC vehicles.
- 4-pole rotor design for enhanced torque and explosive power.
- Intelligent freewheeling technology in ESC for higher efficiency, lower operating temperatures, and improved reliability.
- Motor output power and efficiency increased by over 4% compared to previous generations, reducing operating temperature.
- Compact G2 ESC design: 8.3% shorter, 7.1% narrower, and 16.7% lower than the previous 16BL30 ESC, facilitating easier installation and cleaner wiring.
- Durable motor construction with 0.2mm thick silicon steel laminations, high-strength explosion-proof rotor, high-temperature resistant coil, and high-precision bearings.
- IP67-rated protection for both ESC and motor, allowing operation in harsh environments including rain, sand, and muddy conditions.
2.3 ຮູບພາບຜະລິດຕະພັນ
Image: The HOBBYWING QUICRUN 16BL30 G2 ESC and 2435SL 4500KV Brushless Motor Combo, showcasing ທັງສອງອົງປະກອບ.
3. ຂໍ້ຄວນລະວັງຄວາມປອດໄພ
Always observe the following safety guidelines to prevent injury or damage to the product and surrounding property:
- ອ່ານຄູ່ມື: ຈົ່ງຄຸ້ນເຄີຍກັບຄໍາແນະນໍາທັງໝົດກ່ອນການດໍາເນີນງານ.
- ການເຊື່ອມຕໍ່ທີ່ຖືກຕ້ອງ: Ensure all wiring connections are correct and secure to prevent short circuits or malfunction.
- ຄວາມປອດໄພຫມໍ້ໄຟ: Use only compatible batteries and follow battery manufacturer's safety instructions. Disconnect the battery when not in use.
- ຫຼີກລ້ຽງການຮ້ອນເກີນໄປ: Monitor motor and ESC temperatures during operation. Excessive heat can damage components.
- ການຕໍ່ຕ້ານນ້ໍາແລະຝຸ່ນ: While IP67 rated, avoid prolonged submersion or exposure to corrosive liquids. Always clean and dry components after use in wet or dusty conditions.
- ເດັກນ້ອຍ: ບໍ່ໃຫ້ເດັກນ້ອຍເຂົ້າເຖິງໄດ້ ເວັ້ນເສຍແຕ່ໄດ້ຮັບການເບິ່ງແຍງຈາກຜູ້ໃຫຍ່.
- ການຖອດອອກໄດ້: Do not attempt to disassemble or modify the ESC or motor, as this may void the warranty and cause damage.
4. ຕັ້ງຄ່າ
4.1 ການຕິດຕັ້ງ
- ຕິດຕັ້ງມໍເຕີ: Securely attach the 2435SL 4500KV motor to your vehicle's motor mount using appropriate screws. Ensure proper gear mesh with the pinion gear.
- ຕິດຕັ້ງ ESC: Find a suitable location in your vehicle for the 16BL30 G2 ESC, ensuring good airflow for cooling. Use double-sided tape or screws to secure it.
4.2 ການເຊື່ອມຕໍ່ສາຍໄຟ
- Motor to ESC: Connect the three motor wires to the corresponding output wires on the ESC. Ensure correct phase connection (A-A, B-B, C-C). Incorrect connection may result in improper motor rotation or damage.
- ESC to Receiver: Plug the ESC's throttle cable into the throttle channel (usually Channel 2) of your RC receiver.
- Battery to ESC: Connect your battery pack to the ESC's power input connectors. Ensure correct polarity (positive to positive, negative to negative).
4.3 ESC Throttle Range Calibration
Proper calibration of the ESC's throttle range is crucial for correct operation. Refer to your specific radio system's manual for detailed instructions, but generally, the steps are:
- ເປີດເຄື່ອງສົ່ງສັນຍານຂອງທ່ານ ແລະ ຕັ້ງຄັນເລັ່ງໃຫ້ເປັນກາງ.
- Connect the battery to the ESC while holding the ESC's SET button (if applicable, or follow specific power-on sequence).
- Follow the audible beeps or LED indicators to set the neutral, full throttle, and full brake positions on your transmitter.
- Release the SET button and disconnect/reconnect the battery to save settings.
4.4 ການຂຽນໂປຣແກຣມ (ທາງເລືອກ)
The QUICRUN 16BL30 G2 ESC can be programmed using an optional HOBBYWING LED Program Card (sold separately) to adjust parameters such as cut-off voltage, drag brake, punch, and more. Refer to the program card's manual for detailed instructions.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
5.1 ການເປີດ/ປິດ
- ເພື່ອເປີດເຄື່ອງ: Ensure all connections are secure. Turn on your transmitter first, then connect the battery to the ESC. The ESC will emit a series of tones indicating it's ready.
- ປິດເຄື່ອງ: ຕັດການເຊື່ອມຕໍ່ຫມໍ້ໄຟຈາກ ESC ກ່ອນ, ຈາກນັ້ນປິດເຄື່ອງສົ່ງຂອງທ່ານ.
5.2 ການດໍາເນີນງານພື້ນຖານ
After successful setup and calibration, your RC vehicle is ready for operation. Use the throttle trigger on your transmitter to control the motor speed and direction. Always operate your RC vehicle in a safe and open area, away from people, pets, and obstacles.
5.3 Environmental Use
The IP67 rating provides protection against dust and water ingress. This allows for operation in challenging conditions such as wet grass, puddles, or dusty trails. However, it is recommended to:
- ຫຼີກລ້ຽງການຈົມຢູ່ໃນນ້ໍາເປັນເວລາດົນ.
- Rinse off dirt and mud with clean water after use in harsh conditions.
- Ensure all components are thoroughly dried before storage or next use.
6. ບໍາລຸງຮັກສາ
- ທໍາຄວາມສະອາດ: Regularly clean the motor and ESC to remove dirt, dust, and debris. Use a soft brush or compressed air.
- ການກວດກາ: Periodically inspect all wires, connectors, and solder joints for signs of wear, damage, or corrosion. Check motor bearings for smooth operation.
- ການຕິດຕາມອຸນຫະພູມ: Continuously monitor the operating temperature of both the motor and ESC. If temperatures exceed safe limits (typically above 80°C / 176°F), reduce load, adjust gearing, or allow components to cool. Prolonged high temperatures can lead to irreversible damage.
- ການເກັບຮັກສາ: Store the ESC and motor in a clean, dry place away from direct sunlight and extreme temperatures. Disconnect batteries during storage.
7. ການແກ້ໄຂບັນຫາ
ພາກສ່ວນນີ້ແກ້ໄຂບັນຫາທົ່ວໄປທີ່ທ່ານອາດຈະພົບ. ສໍາລັບບັນຫາທີ່ບໍ່ມີຢູ່ໃນລາຍການ, ກະລຸນາຕິດຕໍ່ຝ່າຍຊ່ວຍເຫຼືອລູກຄ້າ.
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Motor does not run or runs intermittently. | Loose wiring, incorrect connections, low battery, ESC not calibrated. | Check all wiring, ensure battery is charged, recalibrate ESC. |
| Motor runs in the wrong direction. | ການເຊື່ອມຕໍ່ສາຍໄຟມໍເຕີບໍ່ຖືກຕ້ອງ. | ປີ້ນສາຍໄຟມໍເຕີສອງໃນສາມສາຍ. |
| ESC or motor overheats. | Over-gearing, excessive load, insufficient airflow, damaged components. | Reduce gearing, ensure proper ventilation, check for binding in drivetrain, allow components to cool. |
| ການສູນເສຍການຄວບຄຸມ ຫຼື ພຶດຕິກຳທີ່ບໍ່ປົກກະຕິ. | Radio interference, low receiver battery, damaged receiver/transmitter. | Check radio system, ensure receiver battery is charged, operate in an interference-free area. |
8. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຍີ່ຫໍ້ | HOBBYWING |
| ຊື່ຕົວແບບ | QUICRUN 16BL30 G2 + 2435SL COMBO |
| ໝາຍເລກຕົວແບບ | 2435SL 4500KV |
| ຂະໜາດສິນຄ້າ | 1.65"W x 3.07"H |
| ວັດສະດຸ | Alloy Steel, Aluminum, Copper |
| ນ້ໍາຫນັກລາຍການ | 8.8 ອອນ |
| UPC | 088718520300 |
| ໝາຍເລກປະຈໍາຕົວການຄ້າທົ່ວໂລກ | 00088718520300 |
| ຜູ້ຜະລິດ | ງານອະດິເລກ |
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
9.1 ຂໍ້ມູນການຮັບປະກັນ
HOBBYWING products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the official HOBBYWING website ຫຼືຕິດຕໍ່ສະຫນັບສະຫນູນລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.
9.2 ສະຫນັບສະຫນູນລູກຄ້າ
Should you require technical assistance, have questions regarding setup, operation, or encounter any issues not covered in this manual, please contact HOBBYWING North America customer support. Contact details can typically be found on the official HOBBYWING webເວັບໄຊທ໌ຫຼືຜ່ານຮ້ານຂາຍຍ່ອຍຂອງທ່ານ.
10. ວິດີໂອຜະລິດຕະພັນຢ່າງເປັນທາງການ
No official product videos from the seller were found to be relevant or useful for this instruction manual.
