DieseRC Wireless Light Switch Remote Receiver Kit User Manual

ແນະນຳ

This manual provides detailed instructions for the installation, operation, and maintenance of your DieseRC Wireless Light Switch Remote Receiver Kit. Please read this manual thoroughly before installation and use to ensure proper function and safety.

The DieseRC Wireless Light Switch Remote Receiver Kit offers a convenient solution for controlling lighting and other electrical devices without the need for complex wiring. Utilizing 433Mhz RF technology, it provides stable and reliable performance with a strong signal range.

ແມ່ນຫຍັງຢູ່ໃນກ່ອງ

• 1 x Wireless Receiver Module
• 1 x Wireless Wall Switch (Transmitter)
• AAA Batteries (for transmitter)
• ເທບກາວສອງດ້ານ
• screws ການຕິດຕັ້ງ

Image: The complete DieseRC Wireless Light Switch Remote Receiver Kit, showing the wall switch and the compact receiver module.

ຂໍ້ມູນຈໍາເພາະ

Image: Detailed dimensions of both the wireless wall switch and the receiver module, along with included accessories like batteries, double-sided tape, and screws.

ຂໍ້ມູນຄວາມປອດໄພ

• Always disconnect power at the circuit breaker before installing or servicing any electrical components.
• ການຕິດຕັ້ງຄວນໄດ້ຮັບການປະຕິບັດໂດຍຊ່າງໄຟຟ້າທີ່ມີຄຸນວຸດທິຖ້າທ່ານບໍ່ແນ່ໃຈກ່ຽວກັບສາຍໄຟຟ້າ.
• Ensure the receiver's maximum load capacity (10A, 1500W) is not exceeded.
• ຢ່າເຮັດໃຫ້ອຸປະກອນມີຄວາມຊຸ່ມຊື່ນ ຫຼືອຸນຫະພູມສູງສຸດ.
• ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.

ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

1. Receiver Module Installation

1. ຕັດການເຊື່ອມຕໍ່ພະລັງງານ: Turn off the main power supply to the circuit at the breaker before beginning installation.
2. ເຊື່ອມຕໍ່ສາຍໄຟ: The receiver module is designed to be installed between the power supply and the device (e.g., light fixture, fan).
   • Connect the Live (L) and Neutral (N) input wires from your power source to the "INPUT L" and "INPUT N" terminals on the receiver.
   • Connect the Live (L) and Neutral (N) output wires to your device (e.g., light bulb) to the "OUTPUT L" and "OUTPUT N" terminals on the receiver.
3. ຕົວຮັບທີ່ປອດໄພ: The mini size of the receiver (1.85 × 1.1 × 0.87 inches) allows it to be easily hidden in most electrical boxes or junction boxes. You can also use screws to fix it onto a board if needed.
4. ການວາງເສົາອາກາດ: The receiver has an antenna. For stronger signal reception, ensure the antenna is not completely enclosed by metal and can be stretched out if possible.
5. ຟື້ນຟູພະລັງງານ: Once connections are secure, restore power at the circuit breaker.

Image: A clear wiring diagram illustrating how to connect the receiver module between the AC power input and the light fixture. It also shows the receiver installed within a junction box.

Image: Demonstrates the compact size of the receiver module and its typical installation within a ceiling light fixture, highlighting its ability to fit into tight spaces.

2. Wireless Wall Switch (Transmitter) Installation

1. ການ​ຕິດ​ຕັ້ງ​ຫມໍ້​ໄຟ​: The switch requires AAA batteries (included). Open the back cover of the switch to insert the batteries.
2. ການຕິດຕັ້ງ: The wireless switch can be fixed to a wall or any flat surface using the provided double-sided adhesive tape or screws. No wiring is required for the switch itself.

Image: Step-by-step visual guide for installing the wireless wall switch, including battery placement and mounting options using screws or adhesive tape.

ຄໍາແນະນໍາການດໍາເນີນງານ

1. Pairing the Switch with the Receiver (Toggle Mode)

The kit usually comes pre-paired. If re-pairing is needed or you are adding additional switches:

1. Reset Receiver (Optional): To clear all previous pairings, press the learning button on the receiver 8 times. The indicator light will flash to confirm. After resetting, no remote control will work until re-paired.
2. ເຂົ້າສູ່ໂໝດການຮຽນຮູ້: Press the learning button on the receiver 3 times. The indicator light will turn on, indicating it's ready to pair.
3. Pair ON Function: Press the "ON" button on your wireless wall switch once. The receiver's indicator light will flash, confirming the ON function is paired.
4. Pair OFF Function: Press the "OFF" button on your wireless wall switch once. The receiver's indicator light will flash again, confirming the OFF function is paired.
5. ການທົດສອບ: Press the ON/OFF buttons on the switch to verify control over the connected device.

Image: Visual guide demonstrating how to pair the wireless switch with the receiver (toggle mode) by pressing the learning button 3 times, then pressing ON and OFF on the switch. Also shows how to reset the receiver by pressing the learning button 8 times.

2. ການດໍາເນີນງານພື້ນຖານ

• Press the "ON" button on the wireless wall switch to turn on the connected device.
• Press the "OFF" button on the wireless wall switch to turn off the connected device.

Each receiver can store approximately 10 wireless switches, allowing multiple switches to control one device. Conversely, one transmitter can control multiple receivers.

Image: Illustrates the flexibility of the system, showing how multiple wireless switches can control a single lamp, and how one wireless switch can control multiple lamps.

3. ວິດີໂອສາທິດຜະລິດຕະພັນ

ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: Wipe the switch and receiver with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• ການປ່ຽນແບັດເຕີຣີ: The AAA battery in the wireless switch has an estimated lifespan of 5 years. Replace the battery when the switch's indicator light no longer illuminates or its response becomes inconsistent. To replace, carefully open the back cover of the switch.
• Relay Lifespan: The receiver's relay is designed for over 400,000 operations.

ການແກ້ໄຂບັນຫາ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information or technical support, please refer to the product packaging or contact DieseRC customer service directly. Contact details are typically available on the manufacturer's official webເວັບໄຊທ໌ຫຼືຜ່ານເວທີການຊື້ຂອງທ່ານ.

DieseRC is committed to providing reliable products and customer satisfaction. If you encounter any issues not covered in this manual, please reach out to our support team for assistance.