1. ບົດແນະນຳ
This manual provides detailed instructions for the Bikevee Wireless Cycling GPS Computer, a device designed to track and display various cycling data. It features a 2.4-inch LCD display with auto backlight, IPX7 waterproofing, and multi-satellite GPS tracking for accurate data collection.
1.1 ລັກສະນະທີ່ສໍາຄັນ
- ອາຍຸແບັດເຕີຣີທີ່ຂະຫຍາຍອອກ: Equipped with a 650mAh rechargeable battery, providing up to 28 hours of continuous use.
- Precision GPS Tracking: Utilizes 5-satellite systems (GPS, BDS, GLONASS, Galileo, QZSS) for stable and accurate signal reception.
- ທົນທານແລະກັນນ້ໍາ: IPX7 waterproof rating ensures resistance to rain and splashes.
- ຈໍສະແດງຜົນທີ່ຈະແຈ້ງ: 2.4-inch LCD screen with automatic backlight for visibility in various lighting conditions.
- ຂໍ້ມູນຄົບຖ້ວນ: Tracks speed (MPH/KM/H), distance, time, temperature, altitude, gradient, and more.
1.2 ສິ່ງທີ່ຢູ່ໃນກ່ອງ
ກວດສອບວ່າອົງປະກອບທັງໝົດມີຢູ່ໃນຊຸດ:
Figure 1.1: Package Contents. Includes Bike Computer, Charging Cable, Rubber Rings, Mount, Rubber Pad, and User Manual.
- Bikevee GPS Cycling Computer
- ພູລົດຖີບມາດຕະຖານ
- Out Front Mount
- ແຜ່ນຢາງ
- ສາຍສາກ (ປະເພດ-C)
- Rubber Rings for Mount Installation
- ຄູ່ມືຜູ້ໃຊ້
2. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
2.1 ການສາກອຸປະກອນ
Before first use, fully charge the Bikevee GPS Computer. Connect the provided Type-C charging cable to the device's charging port and a USB power source. The battery indicator on the screen will show charging status.
2.2 ການຕິດຕັ້ງອຸປະກອນ
The Bikevee GPS Computer comes with both a standard bike mount and an out front mount. Choose the mount that best suits your preference and bicycle setup.
2.2.1 Standard Bike Mount Installation
- Place the rubber pad on your bicycle's handlebar or stem.
- Position the standard bike mount on top of the rubber pad.
- Secure the mount using the provided rubber rings, wrapping them around the handlebar/stem and hooking them onto the mount.
- Align the Bikevee GPS Computer with the mount's grooves and twist clockwise until it locks into place.
2.2.2 Out Front Mount Installation
Figure 2.1: Bikevee Out Front Mount.
- Place the rubber pad around your bicycle's handlebar where you intend to install the mount.
- Position the out front mount over the rubber pad.
- Use the provided Allen key to tighten the screw on the mount's clamp around the handlebar until it is secure.
- Align the Bikevee GPS Computer with the mount's grooves and twist clockwise until it locks into place.
Figure 2.2: Handlebar Mount Components.
2.3 ເປີດ ແລະ ຕັ້ງຄ່າເບື້ອງຕົ້ນ
- ເປີດ: Press and hold the power button (usually located at the bottom left) until the screen illuminates.
- ການຄັດເລືອກໜ່ວຍ: Upon first power-on or after a reset, you may be prompted to select your preferred unit of measurement (MPH or KM/H). Use the navigation buttons to select and confirm.
- GPS Acquisition: Take the device outdoors to an open area to allow it to acquire GPS satellite signals. This may take a few moments. A stable GPS signal icon will appear once connected.
3. ຄໍາແນະນໍາການດໍາເນີນງານ
3.1 ການດໍາເນີນງານພື້ນຖານ
- ເປີດ/ປິດ: Press and hold the left button to power on or off.
- Start/Pause/Stop Ride: Press the middle button to start recording a ride. Press again to pause. Press and hold to stop and save the ride data.
- Page Switching: Use the right button to cycle through different data display pages.
- ແສງຫຼັງ: The device features an automatic backlight that adjusts based on ambient light conditions.
3.2 Data Display and Interpretation
The Bikevee GPS Computer displays up to 14 types of cycling data, providing comprehensive insights into your ride.
Figure 3.1: Supported Data Types Display.
- ຄວາມໄວປະຈຸບັນ: Displays your real-time speed (MPH or KM/H).
- ຄວາມໄວສະເລ່ຍ: The average speed for the current ride.
- ຄວາມໄວສູງສຸດ: The highest speed recorded during the current ride.
- ເວລາຂີ່: Duration of the current active ride.
- Ride Distance: Distance covered during the current ride.
- ໄລຍະທາງທັງໝົດ (Odometer): Cumulative distance recorded by the device.
- ອຸນຫະພູມ: ອຸນຫະພູມສະພາບແວດລ້ອມ.
- ໂມງ: ເວລາປະຈຸບັນ.
- ຂຶ້ນ: Total elevation gained during the ride.
- Gradient: Current incline or decline percentage.
- ລະດັບຄວາມສູງ: Current elevation above sea level.
Figure 3.2: Display Icons and Their Meanings.
- Satellite Signal: ຊີ້ບອກຄວາມແຮງຂອງສັນຍານ GPS.
- IPX7: Confirms waterproof rating.
- ລະດັບຫມໍ້ໄຟ: ສະແດງການສາກແບັດເຕີຣີທີ່ເຫຼືອ.
- Backlight ອັດຕະໂນມັດ: Indicates auto backlight feature is active.
- ປະເພດ -C: Denotes the charging port type.
- Speed Comparison: Arrow indicates if current speed is higher or lower than average speed.
4. ການບໍາລຸງຮັກສາແລະການດູແລ
4.1 ການທໍາຄວາມສະອາດອຸປະກອນ
To maintain optimal performance and appearance, clean the device regularly:
- ເຊັດໜ້າຈໍ ແລະ ຕົວເຄື່ອງດ້ວຍຜ້າອ່ອນໆ.amp ຜ້າ.
- Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the device's surface or internal components.
- ຮັບປະກັນວ່າຝາປິດຊ່ອງສຽບສາກໄຟໄດ້ປິດຢ່າງປອດໄພເພື່ອປ້ອງກັນຝຸ່ນ ແລະນໍ້າ.
4.2 ກັນນ້ຳ (IPX7)
Figure 4.1: IPX7 Waterproof Feature.
The Bikevee GPS Computer has an IPX7 waterproof rating, meaning it is protected against temporary immersion in water (up to 1 meter for 30 minutes). However, it is important to note:
- ຢ່າແຊ່ອຸປະກອນຢູ່ໃນນ້ໍາເປັນເວລາດົນນານ.
- ຫຼີກລ້ຽງເຮືອບິນນ້ຳຄວາມກົດດັນສູງ.
- Ensure the charging port cover is sealed before exposure to water.
4.3 ການດູແລແລະເກັບຮັກສາຫມໍ້ໄຟ
- ເກັບຮັກສາອຸປະກອນໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງເມື່ອບໍ່ໄດ້ໃຊ້.
- ຫຼີກລ່ຽງການເອົາອຸປະກອນໄປຕາກແດດໃນອຸນຫະພູມທີ່ຮຸນແຮງ (ຮ້ອນ ຫຼື ເຢັນ) ເປັນເວລາດົນ.
- ສຳລັບການເກັບຮັກສາໄລຍະຍາວ, ໃຫ້ສາກແບັດເຕີຣີໃຫ້ປະມານ 50% ເພື່ອຮັກສາສຸຂະພາບຂອງແບັດເຕີຣີ.
5. ການແກ້ໄຂບັນຫາ
If you encounter issues with your Bikevee GPS Computer, refer to the following common problems and solutions:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ອຸປະກອນບໍ່ເປີດ. | ແບັດເຕີຣີຕໍ່າ. | ສາກອຸປະກອນໃຫ້ເຕັມໂດຍໃຊ້ສາຍ Type-C ທີ່ໃຫ້ມາ. |
| No GPS signal or inaccurate readings. | ຂັດຂວາງ view of sky; initial signal acquisition. | Move to an open outdoor area. Wait a few minutes for signal acquisition. Avoid dense forests or tunnels. |
| ຈໍສະແດງຜົນແມ່ນມືດມົວ ຫຼືອ່ານບໍ່ໄດ້. | Auto backlight setting; low battery. | Ensure sufficient battery charge. The backlight adjusts automatically; try moving to a different lighting condition. |
| ອຸປະກອນຄ້າງ ຫຼື ບໍ່ຕອບສະໜອງ. | ຊອບແວຂັດຂ້ອງ. | Perform a soft reset by pressing and holding the power button for 10-15 seconds until the device restarts. |
6. ຂໍ້ມູນຈໍາເພາະ
Detailed technical specifications for the Bikevee Wireless Cycling GPS Computer:
Figure 6.1: Device Dimensions and Weight.
- ຕົວແບບ: Bikevee Cycling GPS Computer
- ຈໍສະແດງຜົນ: 2.4-inch LCD, Automatic Backlight
- ແບັດເຕີຣີ: ແບັດເຕີຣີລິທຽມໄອອອນ 650mAh ສາມາດສາກໄດ້
- ຊີວິດຫມໍ້ໄຟ: ສູງສຸດ 28 ຊົ່ວໂມງ (ໃຊ້ຕໍ່ເນື່ອງ)
- GPS Systems: GPS, BDS, GLONASS, Galileo, QZSS (5-satellite tracking)
- ການປະເມີນກັນນ້ໍາ: IPX7
- ຂະໜາດ: Approximately 70mm (Height) x 45mm (Width) / 2.76in x 1.77in
- ນ້ຳໜັກ: Approximately 50g / 0.11lb
- ຊ່ອງສາກໄຟ: ປະເພດ -C USB
- Data Types Supported: 14 types (e.g., Speed, Distance, Time, Temperature, Altitude, Gradient)
7. ຂໍ້ມູນການຮັບປະກັນ
The Bikevee Wireless Cycling GPS Computer is covered by a limited manufacturer's warranty. This warranty typically covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For specific warranty terms and conditions, including duration and coverage details, please refer to the warranty card included with your product or contact Bikevee customer support directly.
8. ການຊ່ວຍເຫຼືອລູກຄ້າ
If you have any questions, require technical assistance, or need to report an issue with your Bikevee Wireless Cycling GPS Computer, please contact our customer support team.
- ສະຫນັບສະຫນູນອອນໄລນ໌: Visit the official Bikevee webເວັບໄຊສໍາລັບ FAQs, ຄູ່ມືການແກ້ໄຂບັນຫາ, ແລະຮູບແບບການຕິດຕໍ່.
- ສະຫນັບສະຫນູນອີເມວ: ອ້າງເຖິງການຫຸ້ມຫໍ່ຜະລິດຕະພັນຂອງທ່ານຫຼືຢ່າງເປັນທາງການ webເວັບໄຊທ໌ສໍາລັບທີ່ຢູ່ອີເມລ໌ສະຫນັບສະຫນູນລູກຄ້າ.
When contacting support, please be prepared to provide your product model number (Bikevee Cycling GPS Computer) and a detailed description of the issue.
