ຄູ່ມືການໃຊ້ເຄສຄອມພິວເຕີ Phanteks Eclipse G400A ATX Mid-Tower

ແນະນຳ

The Phanteks Eclipse G400A is a high-performance ATX Mid-Tower computer case designed for optimal airflow and component compatibility. Featuring a tempered glass side panel and pre-installed D-RGB fans, it offers both aesthetic appeal and efficient cooling. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Eclipse G400A case.

Figure 1: Phanteks Eclipse G400A ATX Mid-Tower Computer Case (White)

ຄູ່ມືການຕິດຕັ້ງ

1. ການຫຸ້ມຫໍ່ແລະການກວດກາ

Carefully remove the computer case from its packaging. Inspect the case for any signs of damage during transit. Ensure all accessories, including screws, cable ties, and the user manual, are present.

2. ການຕິດຕັ້ງອົງປະກອບ

The Eclipse G400A is designed for easy installation of your PC components. Follow these general steps:

• ການຕິດຕັ້ງເມນບອດ: Install your ATX motherboard onto the pre-installed standoffs. Ensure proper alignment and secure it with screws. The case supports rear-side connector mainboards for a cleaner build.
• ການຕິດຕັ້ງຫນ່ວຍບໍລິການສະຫນອງພະລັງງານ (PSU): Install your PSU into the dedicated compartment at the bottom rear of the case. The case supports PSUs up to 270mm in length.
• ການຕິດຕັ້ງ Drive Storage: The case supports 2x 2.5" SSDs and 2x 3.5" HDDs. Utilize the dedicated storage brackets and cable management tray for a clean setup.

Figure 2: Internal layout with highlighted storage and cable management areas

• ການຕິດຕັ້ງບັດກາຟິກ (GPU): Install your graphics card into the appropriate PCIe slot. The case supports large GPU cards and includes triple mid-plate 120mm fan locations for direct GPU cooling.
• ການ​ຕິດ​ຕັ້ງ​ຫມໍ້​ໄຟ​ແລະ​ພັດ​ລົມ​: The case comes with 4x M25-140 Gen2 D-RGB fans pre-installed. It offers dedicated 360mm radiator support in the top without restrictions.

Figure 3: Top radiator support and pre-installed 140mm D-RGB fans

Figure 4: Dedicated 120mm fan positions for direct GPU cooling

3. ການຄຸ້ມຄອງສາຍໄຟ

Utilize the dedicated cable management tool and Velcro ties provided to route and secure cables behind the motherboard tray. This ensures optimal airflow and a clean interior.

ຄໍາແນະນໍາການດໍາເນີນງານ

1. ເປີດເຄື່ອງ

After connecting all internal components and external peripherals, connect the power cable to your PSU and a wall outlet. Press the power button located on the top I/O panel of the case to power on your system.

Figure 5: Front I/O Panel Layout

2. ການຄວບຄຸມໄຟ RGB

The pre-installed M25-140 Gen2 D-RGB fans feature addressable RGB lighting. Control the lighting effects through your motherboard's RGB software (if compatible with D-RGB/ARGB) or a dedicated Phanteks RGB controller (sold separately).

ບໍາລຸງຮັກສາ

1. ທໍາຄວາມສະອາດ

Regular cleaning helps maintain optimal performance and extends the lifespan of your components.

• ການກັ່ນຕອງຂີ້ຝຸ່ນ: The Eclipse G400A features ultra-fine performance mesh panels on the top, left, and right sides, acting as dust filters. Regularly remove and clean these filters using compressed air or a soft brush to prevent dust buildup.
• ພາຍນອກ: ເຊັດພື້ນຜິວພາຍນອກດ້ວຍຜ້າອ່ອນໆ, ງamp ຜ້າ. ຫຼີກລ້ຽງການເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.

Figure 6: Removable front mesh panel and dust filter for easy cleaning

Figure 7: Disassembled panels demonstrating airflow and access for cleaning

2. ການເພີ່ມປະສິດທິພາບການໄຫຼວຽນຂອງອາກາດ

Ensure cables are neatly managed to avoid obstructing airflow. Periodically check fan operation to ensure they are spinning freely and quietly.

ການແກ້ໄຂບັນຫາ

• ລະບົບບໍ່ເປີດ:
  • Check all power connections, including the PSU to wall outlet, PSU to motherboard (24-pin and CPU 8-pin), and front panel power switch header.
  • ໃຫ້ແນ່ໃຈວ່າສະວິດ PSU ຢູ່ໃນຕໍາແຫນ່ງ 'ON'.
• ພັດລົມບໍ່ໝຸນ / RGB ບໍ່ສະຫວ່າງ:
  • Verify fan and RGB cables are correctly connected to the motherboard headers or a dedicated RGB controller.
  • Check motherboard BIOS/UEFI settings for fan control and RGB settings.
• ກະແສລົມບໍ່ດີ / ອຸນຫະພູມສູງ:
  • Clean all dust filters and fans.
  • Ensure proper cable management to avoid airflow obstruction.
  • Verify fan orientation (intake/exhaust) for optimal airflow path.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Phanteks products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the official Phanteks webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

For further assistance, visit the official Phanteks support page: www.phanteks.com/support.html