ແນະນຳ
This manual provides detailed instructions for the installation, operation, and maintenance of your BONTEC Single Monitor Arm, Model GDM7505-FBA. Designed for 15-34 inch screens weighing up to 26.5 lbs, this ergonomic gas spring monitor mount offers full motion adjustability, including tilt, swivel, and rotation, along with VESA compatibility (75x75mm and 100x100mm). Please read this manual thoroughly before installation and use to ensure proper setup and safe operation.
Image: The BONTEC Single Monitor Arm, showcasing its design and the two available mounting options (C-clamp ແລະ ພື້ນຖານ grommet).
ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ
- ໃຫ້ແນ່ໃຈວ່າພື້ນຜິວໂຕະຂອງທ່ານແຂງແຮງພໍທີ່ຈະຮອງຮັບນ້ໍາຫນັກລວມຂອງແຂນຂອງຈໍພາບແລະຈໍສະແດງຜົນຂອງທ່ານ.
- ບໍ່ເກີນຄວາມອາດສາມາດນ້ໍາຫນັກສູງສຸດຂອງ 26.5 lbs (12 kg).
- Verify that your monitor is VESA compatible (75x75mm or 100x100mm) before installation.
- Always follow the assembly instructions carefully. Incorrect installation may result in product damage or personal injury.
- ຮັກສາເດັກນ້ອຍ ແລະສັດລ້ຽງໄວ້ໄກໃນລະຫວ່າງການຕິດຕັ້ງ.
- Do not use power tools to tighten screws when attaching the VESA plate to the monitor, as this may damage the monitor. Hand-tighten only.
- Adjust the gas spring tension only after the monitor is mounted to prevent the arm from springing up or down unexpectedly.
ເນື້ອໃນຊຸດ
Please check that all components are present and undamaged before proceeding with installation. Refer to the assembly video for a visual guide to the parts.
Video: Assembly Manual for BONTEC Upgraded Single Monitor Arm. This video provides a step-by-step visual guide for unpacking and assembling the monitor arm, including identifying all parts.
The package should include the following main components and hardware:
- Monitor Arm Assembly (A)
- Lower Arm (B)
- ພື້ນຖານ (C)
- C-clamp (D)
- Brace for C-clamp (E)
- Screws for C-clamp (F)
- Wingnut (G)
- Carriage Bolt (H)
- Allen Keys (I, J, K)
- Monitor Mounting Screws (M-A, M-B, M-C, M-D, M-E) and Washers (M-C)
ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
ຂັ້ນຕອນທີ 1: ເລືອກວິທີການຕິດຕັ້ງຂອງທ່ານ
The BONTEC Monitor Arm supports two installation methods: C-clamp mounting and Grommet mounting. Select the method suitable for your desk.
ຮູບພາບ: ການສະແດງພາບຂອງ C-clamp mounting and grommet mounting options, including desk thickness and hole diameter requirements.
1A. C-clamp ການຕິດຕັ້ງ
- Attach the Brace (E) to the Base (C) using the provided screws (F).
- Position the assembled C-clamp (D) onto your desk edge. Ensure the desk thickness is between 0.39 and 3.15 inches (10-80mm).
- ແຫນ້ນ C-clamp securely to the desk using the Allen key.
1B. Grommet Base Installation
- Remove the clip plate from the clamp (D) if it's attached.
- Insert the Carriage Bolt (H) through the Base (C) and then through the grommet hole in your desk. Ensure the desk thickness is between 0.39 and 2.76 inches (10-70mm) and the hole diameter is between 0.39 and 2.36 inches (10-60mm).
- Secure the base from underneath the desk using the clip plate and Wingnut (G).
Step 2: Install the Arm onto the Base
Slide the lower arm (B) onto the pole of the installed base. Then, slide the main monitor arm assembly (A) onto the lower arm. Secure both arms by tightening the set screws with the appropriate Allen key.
ຂັ້ນຕອນທີ 3: ແນບແຜ່ນ VESA ໃສ່ຈໍພາບ
Carefully attach the VESA plate of the monitor arm to the back of your monitor. Use the appropriate screws (M-A/M-B or M-C/M-D/M-E) and washers (M-C) that fit your monitor's VESA mounting holes. Ensure the screws are inserted loosely, leaving a 3-4mm gap, before hanging the monitor onto the arm. ຢ່າໃຊ້ເຄື່ອງມືໄຟຟ້າ for this step to avoid damaging your monitor.
Step 4: Manage Cables
Route your monitor's power and video cables through the integrated cable management channels on the monitor arm. This helps maintain a clean and organized workspace.
ການດໍາເນີນງານແລະການປັບຕົວ
The BONTEC Single Monitor Arm offers extensive adjustability for optimal viewing comfort. Adjustments include tilt, swivel, rotation, and gas spring tension.
Video: Tips for Using BONTEC Upgraded Single Monitor Mount. This video demonstrates how to adjust the monitor arm's tilt, swivel, and gas spring tension.
ການປັບຕົວອຽງ
The monitor arm allows for a tilt range of +85° to -50°. If the monitor head is dropping down or is too loose, tighten the screw on the tilt mechanism clockwise using the appropriate Allen key until the desired tension is achieved. If it's too stiff, loosen it counter-clockwise.
ການປັບ ໝູນ ວຽນ
The monitor can swivel ±90° at the VESA plate connection. If the monitor is too sensitive or moves too freely, tighten the screw on the swivel joint clockwise with the Allen key to increase resistance. If it's too stiff, loosen it counter-clockwise.
ການປັບການotationູນວຽນ
The monitor can rotate 360° from landscape to portrait orientation. The base and arm joints also offer 360° rotation for flexible positioning.
Image: Diagram illustrating the full motion capabilities of the monitor arm, including tilt (+85°/-50°), swivel (±90°), and 360° rotation.
ການປັບລະດັບຄວາມເຄັ່ງຕຶງຂອງພາກຮຽນ spring Gas
The gas spring tension needs to be adjusted according to your monitor's weight to ensure it stays balanced at any height.
- If the monitor is drooping or falling, turn the tension screw ກົງກັນຂ້າມກັບເຂັມໂມງ to increase tension (up to 20 turns maximum).
- If the monitor is rising too easily or springing up, turn the tension screw ຕາມເຂັມໂມງ to reduce tension (up to 20 turns maximum).
ບໍາລຸງຮັກສາ
- ກວດເບິ່ງທຸກສະກູແລະການເຊື່ອມຕໍ່ຢ່າງເປັນປົກກະຕິເພື່ອຮັບປະກັນວ່າພວກມັນປອດໄພ.
- ເຮັດຄວາມສະອາດແຂນຈໍພາບດ້ວຍຜ້າທີ່ອ່ອນນຸ້ມ, ຜ້າເຊັດໂຕamp ຜ້າ. ຫຼີກລ້ຽງການເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
- Do not disassemble the gas spring cylinder, as it contains high-pressure gas.
ການແກ້ໄຂບັນຫາ & FAQs
- Q: My monitor is drooping or falling down.
- A: The gas spring tension is too low for your monitor's weight. Increase the tension by turning the adjustment screw ກົງກັນຂ້າມກັບເຂັມໂມງ. Refer to the "Gas Spring Tension Adjustment" section in this manual or the "Tips for Using" video.
- Q: My monitor is rising too easily or springing up.
- A: The gas spring tension is too high for your monitor's weight. Reduce the tension by turning the adjustment screw ຕາມເຂັມໂມງ. Refer to the "Gas Spring Tension Adjustment" section in this manual or the "Tips for Using" video.
- Q: The monitor swivels too freely or is too stiff.
- A: Adjust the swivel resistance by tightening or loosening the screw on the swivel joint with the Allen key. Refer to the "Swivel Adjustment" section.
- Q: The monitor arm is unstable or wobbles.
- A: Ensure that the C-clamp or grommet base is securely tightened to the desk. Also, check all connection points on the arm for tightness.
ຂໍ້ມູນຈໍາເພາະ
| ຍີ່ຫໍ້ | BONTEC |
| ໝາຍເລກຕົວແບບ | GDM7505-FBA |
| ຂະຫນາດຫນ້າຈໍເຂົ້າກັນໄດ້ | 15-34 ນິ້ວ |
| ຄວາມອາດສາມາດນ້ໍາຫນັກ | ສູງສຸດ 26.5 lbs (12 kg) |
| ຄວາມເຂົ້າກັນໄດ້ຂອງ VESA | 75x75mm, 100x100mm |
| ປະເພດການຕິດຕັ້ງ | C-clamp or Grommet Base |
| C-clamp ຄວາມໜາຂອງໂຕະ | 0.39 - 3.15 inches (10-80mm) |
| ຄວາມໜາຂອງໂຕະ Grommet | 0.39 - 2.76 inches (10-70mm) |
| ເສັ້ນຜ່າສູນກາງຮູ Grommet | 0.39 - 2.36 inches (10-60mm) |
| ມຸມອຽງ | +85° ເຖິງ -50° |
| ມຸມຫມຸນ | ±90° |
| ພືດຫມູນວຽນ | 360° |
| ສ່ວນຂະຫຍາຍສູງສຸດ | 23.3 ນິ້ວ |
| ຊ່ວງການປັບຄວາມສູງ | 7.1 - 19.1 ນິ້ວ |
| ວັດສະດຸ | ໂລຫະ |
| ສີ | ດຳ |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
BONTEC products are designed for durability and performance. For specific warranty details and customer support, please refer to the warranty card included in your product packaging or visit the official BONTEC website. If you encounter any issues or have questions regarding your monitor arm, please contact BONTEC customer service for assistance.
ນອກນັ້ນທ່ານຍັງສາມາດຊອກຫາຊັບພະຍາກອນເພີ່ມເຕີມແລະຂໍ້ມູນຜະລິດຕະພັນກ່ຽວກັບ BONTEC Store on Amazon.
