AGT INDUSTRIAL AGT-MX15-(B) Small Excavator Instruction Manual

1. ຂໍ້ມູນຄວາມປອດໄພ

For safe operation of the AGT-MX15-(B) Small Excavator, please adhere to all safety guidelines. This equipment is intended for specific uses and requires careful handling.

• Always wear appropriate personal protective equipment (PPE), including hard hat, safety glasses, gloves, and steel-toed boots.
• Ensure the operating area is clear of personnel, obstacles, and overhead hazards before starting.
• ຢ່າຂັບຂີ່ລົດຂຸດໃນຂະນະທີ່ມີເຫຼົ້າ ຫຼື ຢາເສບຕິດ.
• Perform a pre-operation inspection to check for any damage, leaks, or loose components.
• Understand and follow all local safety regulations and site-specific rules.
• Do not exceed the maximum digging depth or lifting capacity.
• Secure the machine properly when transporting.

2. ຜະລິດຕະພັນເກີນview

The AGT-MX15-(B) is a compact and powerful 1-ton mini excavator designed for various digging and earthmoving tasks. It features a 13.5HP engine and includes a non-hydraulic thumb for enhanced material handling capabilities.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​ແລະ​ສະ​ເພາະ​:

• ຕົວແບບ: AGT-MX15-(B)
• ນ້ຳ​ໜັກ​ປະ​ຕິ​ບັດ​ການ: 0.9 Ton (approximately 2205 lbs)
• Net Horsepower (HP): 13.5HP
• ການຍົກຍ້າຍ: 420cc
• Max Digging Depth: 1,769 ມມ (70 ນິ້ວ)
• Max Digging Height: 2,583 ມມ (102 ນິ້ວ)
• ຄວາມສູງໂດຍລວມ: 2,210 ມມ (91 ນິ້ວ)
• ຄວາມກວ້າງລວມ: 936 ມມ (43 ນິ້ວ)
• Blade Max Drop Depth: 146 ມມ (6 ນິ້ວ)
• ຄວາມກວ້າງຂອງການຕິດຕາມ: 180*72*37 (Width*Pitch Length*Links)
• Thumb: Non-hydraulic thumb included
• ປີຕົວແບບ: 2024

ຮູບ 2.1: ຂ້າງ view of the AGT-MX15-(B) Small Excavator, showing the main body, tracks, and boom assembly.

Figure 2.2: The AGT-MX15-(B) Small Excavator with its boom extended and the non-hydraulic thumb attachment visible on the bucket.

3. ການຕິດຕັ້ງແລະການປະກອບ

The AGT-MX15-(B) excavator typically arrives partially assembled. Follow these general steps for final setup:

1. ການຫຸ້ມຫໍ່: Carefully remove the excavator from its packaging. Inspect for any shipping damage.
2. ກວດເຊັກນໍ້າ: Verify engine oil, hydraulic fluid, and fuel levels. Top up if necessary using recommended fluids.
3. ການເຊື່ອມຕໍ່ຫມໍ້ໄຟ: Connect the battery terminals, ensuring correct polarity.
4. ຄວບຄຸມຄວາມຄຸ້ນເຄີຍ: Locate and understand the function of all control levers, pedals, and switches. Refer to the control diagram (if provided separately).
5. ການຕິດຕັ້ງໄຟລ໌ແນບ: If any attachments (e.g., bucket, thumb) are not pre-installed, follow the specific instructions for secure mounting. Ensure all pins and safety clips are in place.
6. Safety Guard Installation: Install any removable safety guards or covers as instructed.

A tool box is included with the product for basic maintenance and assembly needs.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

Before operating, ensure you have read and understood the safety information. Always operate the excavator from the operator's seat.

4.1 ການເລີ່ມຕົ້ນເຄື່ອງຈັກ

1. Ensure the parking brake is engaged and all controls are in the neutral position.
2. ຫັນກະແຈຈຸດໄຟໄປຫາຕຳແໜ່ງ 'ON'.
3. ຖ້າມີອຸປະກອນ, ຈັບ choke ສໍາລັບການເລີ່ມຕົ້ນເຢັນ.
4. Turn the ignition key to the 'START' position and release once the engine starts. Do not crank for more than 5 seconds.
5. Allow the engine to warm up for a few minutes before beginning operation.

4.2 ການດໍາເນີນງານພື້ນຖານ

• ຂັບລົດ: Use the track control levers/pedals to move the excavator forward, backward, and to turn.
• Boom and Arm: Use the joystick controls to raise/lower the boom and extend/retract the arm.
• ຄຸ: Use the joystick controls to curl in or dump the bucket.
• ແກວ່ງ: Use the swing control to rotate the upper structure of the excavator.
• ແຜ່ນໃບ: Use the blade control lever to raise or lower the dozer blade.
• Thumb: The non-hydraulic thumb is manually adjustable or fixed, used in conjunction with the bucket for gripping materials.

4.3 ການປິດເຄື່ອງ

1. ຈອດລົດຂຸດຢູ່ເທິງພື້ນລະດັບ.
2. Lower all attachments to the ground.
3. ຈັບເບກບ່ອນຈອດລົດ.
4. Allow the engine to idle for a few minutes to cool down.
5. ໝຸນກະແຈສະຕາດໄປທີ່ຕຳແໜ່ງ 'ປິດ'.
6. ເອົາກະແຈອອກເພື່ອປ້ອງກັນການໃຊ້ທີ່ບໍ່ໄດ້ຮັບອະນຸຍາດ.

5. ບໍາລຸງຮັກສາ

Regular maintenance is crucial for the longevity and safe operation of your AGT-MX15-(B) excavator.

• ກວດປະຈໍາວັນ: Inspect fluid levels (engine oil, hydraulic fluid, coolant), check for leaks, inspect tracks for damage, and ensure all safety devices are functional.
• ບຳ ລຸງຮັກສາເຄື່ອງຈັກ: Follow the engine manufacturer's recommendations for oil changes, air filter cleaning/replacement, and spark plug inspection.
• ລະບົບໄຮໂດລິກ: Check hydraulic fluid level regularly. Replace hydraulic filters as per schedule.
• Greasing: Lubricate all grease points on the boom, arm, bucket, and swing bearing daily or before each use.
• ຕິດຕາມຄວາມເຄັ່ງຕຶງ: Periodically check and adjust track tension to prevent premature wear.
• ທໍາຄວາມສະອາດ: Keep the excavator clean, especially around the engine and hydraulic components, to prevent overheating and contamination.
• ການເກັບຮັກສາ: When storing for extended periods, ensure the excavator is clean, all fluids are at correct levels, and the battery is disconnected or maintained.

6. ການແກ້ໄຂບັນຫາ

ພາກນີ້ສະຫນອງການແກ້ໄຂບັນຫາການດໍາເນີນງານທົ່ວໄປ. ສໍາລັບບັນຫາທີ່ຊັບຊ້ອນ, ໃຫ້ຕິດຕໍ່ພະນັກງານບໍລິການທີ່ມີຄຸນວຸດທິ.

• ເຄື່ອງຈັກເລີ່ມຕົ້ນບໍ່ສຳເລັດ:
  • ກວດເບິ່ງລະດັບນໍ້າມັນ.
  • ໃຫ້ແນ່ໃຈວ່າການເຊື່ອມຕໍ່ແບັດເຕີຣີປອດໄພ ແລະ ແບັດເຕີຣີຖືກສາກແລ້ວ.
  • ກວດ​ສອບ​ວ່າ​ສະ​ວິດ​ໄຟ​ໄຫມ້​ແມ່ນ​ເຮັດ​ວຽກ​.
  • ກວດສອບຫົວທຽນວ່າມີການເປື້ອນ ຫຼື ເສຍຫາຍຫຼືບໍ່.
• ການສູນເສຍພະລັງງານໄຮໂດຼລິກ:
  • Check hydraulic fluid level.
  • Inspect for hydraulic leaks.
  • Ensure hydraulic filters are not clogged.
• ເຄື່ອງຈັກຄວາມຮ້ອນເກີນ:
  • Check coolant level.
  • Clean radiator fins and engine cooling areas.
  • ຮັບປະກັນການລະບາຍອາກາດທີ່ເຫມາະສົມ.
• ສິ່ງລົບກວນທີ່ຜິດປົກກະຕິ:
  • Identify the source of the noise.
  • Check for loose components, worn bearings, or insufficient lubrication.

7. ລາຍລະອຽດສະເພາະ

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For information regarding warranty coverage, technical support, or to order replacement parts, please contact AGT INDUSTRIAL customer service. Refer to your purchase documentation for specific warranty terms and contact details.

Always provide your model number (AGT-MX15-(B)) and serial number when contacting support to ensure efficient service.