ແນະນຳ
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Sharkoon VK4 Rainbow ATX PC Case. The VK4 Rainbow is designed with a minimalist exterior featuring a perforated front panel and includes four pre-installed 120mm fans with rainbow effect for optimal airflow. It offers ample space for large hardware components and supports radiators up to 360mm, alongside features for clean cable management.

ຮູບທີ 1: ມຸມ view of the Sharkoon VK4 Rainbow ATX PC Case, highlighting its perforated front and pre-installed rainbow fans.
ສິນຄ້າເກີນview
The Sharkoon VK4 Rainbow ATX PC Case is engineered for efficient cooling and hardware compatibility. Key features include:
- ຄວາມເຢັນທີ່ດີເລີດ: Equipped with four pre-installed 120mm rainbow effect fans for excellent airflow. Additional fan mounting options are available.
- ການຮອງຮັບການເຮັດຄວາມເຢັນນ້ໍາ: The front panel supports radiators up to 360mm, and the top panel accommodates radiators up to 280mm.
- ພາຍໃນກວ້າງຂວາງ: Designed to house large components such as graphics cards up to 35cm, CPU coolers up to 16cm, and power supplies up to 21cm.
- Ampການເກັບຮັກສາ: Supports up to two 3.5" HDDs or four 2.5" SSDs.
- ການເຊື່ອມຕໍ່ທີ່ສະດວກ: Top panel features two USB 3.0 ports and a TRRS port for easy access.
- ການຈັດຕັ້ງພາຍໃນ: Generous space for cable management and pre-installed dust filters at all air intake points for cleanliness.
ອົງປະກອບກໍລະນີ

ຮູບ 2: ດ້ານຫນ້າ view with perforated panel and three 120mm rainbow fans.

ຮູບ 3: ຂ້າງ view showcasing ແຜງກະຈົກຮ້ອນ.

ຮູບ 4: ດ້ານຫລັງ view with I/O shield area, expansion slots, and exhaust fan.

Figure 5: Top I/O panel with USB 3.0 ports and TRRS audio jack.
ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Follow these steps to install your PC components into the Sharkoon VK4 Rainbow case.
1. Prepare the Case
- ຄ່ອຍໆແກະກ່ອງອອກ ແລະ ເອົາວັດສະດຸຫຸ້ມຫໍ່ທັງໝົດອອກ.
- Remove the tempered glass side panel by unscrewing the thumb screws at the rear and gently pulling it open.
- Remove the opposite metal side panel to access the cable management area.

Figure 6: Internal layout of the VK4 Rainbow case, ready for component installation.
2. ການຕິດຕັ້ງເມນບອດ
- The VK4 Rainbow supports Mini-ITX, Micro-ATX, and ATX motherboards.
- ຕິດຕັ້ງແຜ່ນປ້ອງກັນ I/O ເຂົ້າໄປໃນຊ່ອງຕັດຢູ່ດ້ານຫຼັງຂອງເຄສ.
- Align your motherboard with the pre-installed standoffs and secure it with screws. Ensure all standoffs are used for proper support.
3. ການຕິດຕັ້ງຫນ່ວຍບໍລິການສະຫນອງພະລັງງານ (PSU).
- Install the PSU into the dedicated compartment at the bottom rear of the case.
- ຮັບປະກັນ PSU ດ້ວຍ screws ຈາກດ້ານຫລັງຂອງກໍລະນີ.
4. ການຕິດຕັ້ງໄດຣຟ໌ເກັບຂໍ້ມູນ
- ເຄສນີ້ຮອງຮັບ HDD ຂະໜາດ 3.5 ນິ້ວ ໄດ້ສູງສຸດສອງໜ່ວຍ ຫຼື SSD ຂະໜາດ 2.5 ນິ້ວ ໄດ້ສີ່ໜ່ວຍ.
- Mount 3.5" HDDs in the drive cage located under the PSU shroud.
- Mount 2.5" SSDs on the dedicated mounting points behind the motherboard tray or on top of the PSU shroud.
5. ບັດກາຟິກ ແລະ ການຕິດຕັ້ງກາດຂະຫຍາຍ
- ຖອດຊ່ອງສຽບການຂະຫຍາຍທີ່ຈໍາເປັນຢູ່ດ້ານຫລັງຂອງກໍລະນີ.
- Insert your graphics card or other expansion cards into the PCIe slots on your motherboard and secure them with screws.
6. ການຄຸ້ມຄອງສາຍໄຟ
ໃຊ້ຈຸດຕັດສາຍໄຟ ແລະ ຈຸດມັດສາຍໄຟຢູ່ທາງຫຼັງຖາດເມນບອດເພື່ອຈັດລະບຽບສາຍໄຟ. ສິ່ງນີ້ຊ່ວຍປັບປຸງການໄຫຼວຽນຂອງອາກາດ ແລະ ຄວາມງາມ.

Figure 7: Cable management area behind the motherboard tray.
ການດໍາເນີນງານ
Front Panel Connectivity
The top panel of the VK4 Rainbow case provides convenient access to essential ports:
- 2x USB 3.0 Ports: ສໍາລັບການໂອນຂໍ້ມູນຄວາມໄວສູງກັບອຸປະກອນທີ່ເຂົ້າກັນໄດ້.
- 1x TRRS Port: A combined audio jack for headsets with a single 3.5mm plug (microphone and audio).
- ປຸ່ມເປີດປິດ: To turn your system on/off.
- ປຸ່ມຣີເຊັດ: ເພື່ອເລີ່ມລະບົບຂອງທ່ານຄືນໃໝ່.
ການປະຕິບັດງານຂອງພັດລົມ
The four pre-installed 120mm rainbow effect fans are connected via Molex connectors. Due to this connection type, the fans operate at a constant speed and their speed cannot be adjusted via the motherboard. This ensures consistent airflow but may result in a noticeable fan noise level.
ບໍາລຸງຮັກສາ
ການບໍາລຸງຮັກສາເປັນປົກກະຕິຈະຊ່ວຍຮັບປະກັນການປະຕິບັດທີ່ດີທີ່ສຸດແລະອາຍຸຍືນຂອງອົງປະກອບ PC ຂອງທ່ານ.
ການເຮັດຄວາມສະອາດການກັ່ນຕອງຂີ້ຝຸ່ນ
- The VK4 Rainbow features pre-installed dust filters at all air intake points (front, top, and bottom).
- Periodically remove and clean these filters to prevent dust buildup inside the case, which can impede airflow and component cooling.
- Filters can typically be cleaned with compressed air or by rinsing with water and allowing them to dry completely before reinstallation.
ທໍາຄວາມສະອາດທົ່ວໄປ
- ໃຊ້ຜ້າປຽກອ່ອນໆເຊັດພື້ນຜິວພາຍນອກຂອງກໍລະນີ.
- For the tempered glass panel, use a glass cleaner and a microfiber cloth to avoid streaks.
- Ensure the system is powered off and unplugged before performing any cleaning inside the case.
ການແກ້ໄຂບັນຫາ
ພາກສ່ວນນີ້ແກ້ໄຂບັນຫາທົ່ວໄປທີ່ທ່ານອາດຈະພົບ.
- High Fan Noise: The pre-installed fans are connected via Molex and operate at a constant speed. If fan noise is a concern, consider replacing the fans with PWM-controlled alternatives that can be regulated by your motherboard.
- ການໄຫຼວຽນຂອງອາກາດບໍ່ດີ/ຄວາມຮ້ອນເກີນໄປ:
- Check if dust filters are clean and not obstructed.
- Ensure all case fans are spinning correctly.
- Verify that cables are neatly managed and not blocking airflow paths.
- ຄວາມຫຍຸ້ງຍາກກັບການຄຸ້ມຄອງສາຍ: While the case offers space, complex builds with many components may require careful planning. Utilize cable ties and routing channels effectively.
- ພອດແຜງດ້ານໜ້າບໍ່ເຮັດວຽກ:
- Ensure the front panel connectors (USB 3.0, audio, power, reset) are correctly plugged into the motherboard headers.
- Check your motherboard manual for correct header pinouts.
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຍີ່ຫໍ້ | ຊາຄູນ |
| ຊື່ຕົວແບບ | VK4 Rainbow |
| ໝາຍເລກຕົວແບບ | SHA-VK4-RAINBOW BK |
| ປະເພດກໍລະນີ | ATX Tower |
| ຄວາມເຂົ້າກັນໄດ້ຂອງເມນບອດ | Mini-ITX, Micro-ATX, ATX |
| ສີ | ດຳ |
| ວັດສະດຸ | ໂລຫະ |
| ຂະໜາດສິນຄ້າ (L x W x H) | 40.4 x 20.6 x 48.7 cm |
| ນ້ໍາຫນັກລາຍການ | 7.12 ກິໂລ |
| ພັດລົມທີ່ຕິດຕັ້ງໄວ້ລ່ວງໜ້າ | 4x 120mm Rainbow Effect Fans |
| ສູງສຸດ. ຄວາມຍາວບັດກາຟິກ | 35 ຊຕມ |
| ສູງສຸດ. ຄວາມສູງຂອງ CPU Cooler | 16 ຊຕມ |
| ສູງສຸດ. ຄວາມຍາວ PSU | 21 ຊຕມ |
| ຮອງຮັບລັງສີ (ດ້ານໜ້າ) | ເຖິງ 360 ມມ |
| ຮອງຮັບລັງສີ (ເທິງສຸດ) | ເຖິງ 280 ມມ |
| ຂັບລົດ Bays | 2x 3.5" HDD or 4x 2.5" SSD |
| ຫນ້າ I/O | 2x USB 3.0, 1x TRRS Audio |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Sharkoon website. If you require technical assistance or have questions not covered in this manual, please contact Sharkoon customer support through their official channels.
ຜູ້ຜະລິດ: ບໍລິສັດ Sharkoon Technologies GmbH
Webເວັບໄຊ: www.sharkoon.com





