ຄູ່ມືການນຳໃຊ້ໄຟ LED CINOTON 26W ສຳລັບຕິດຝາຜະໜັງ

1. ບົດແນະນຳ

This manual provides detailed instructions for the installation, operation, and maintenance of your CINOTON 26W LED Wall Pack Light. Please read this manual thoroughly before installation and retain it for future reference.

Figure 1.1: CINOTON 26W LED Wall Pack Lights (6-Pack)

This image displays six individual CINOTON 26W LED Wall Pack Lights, showcasing their design and form factor. Each light features a dark grey top housing with a clear, ribbed lens, and a visible photocell sensor on the top surface.

2. ຂໍ້ມູນຄວາມປອດໄພ

Always follow basic safety precautions when installing or servicing electrical equipment to reduce the risk of fire, electric shock, or injury to persons.

• Ensure the power supply is disconnected before installation, inspection, or removal.
• Installation should be performed by a qualified electrician in accordance with the National Electrical Code (NEC) and local code requirements.
• ຢ່າຕິດຕັ້ງໃສ່ພື້ນຜິວທີ່ບໍ່ມີໂຄງສ້າງ.
• ຢ່າດັດແປງອຸປະກອນ. ການ​ດັດ​ແກ້​ໃດ​ໜຶ່ງ​ອາດ​ຈະ​ລົບ​ລ້າງ​ການ​ຮັບ​ປະ​ກັນ ແລະ​ສ້າງ​ຄວາມ​ສ່ຽງ​ດ້ານ​ຄວາມ​ປອດ​ໄພ.
• ໃສ່ອຸປະກອນປ້ອງກັນສ່ວນບຸກຄົນທີ່ເຫມາະສົມ (PPE) ເຊັ່ນ: ແວ່ນຕານິລະໄພ ແລະຖົງມືໃນລະຫວ່າງການຕິດຕັ້ງ.

3. ຜະລິດຕະພັນເກີນview

The CINOTON 26W LED Wall Pack Light is designed for outdoor security and flood lighting applications, featuring a durable construction and an integrated dusk-to-dawn sensor.

3.1 ລັກສະນະທີ່ສໍາຄັນ

• Automated Dusk-to-Dawn Functionality: The integrated photocell sensor automatically turns the light ON at sundown/night and OFF at sunrise/daytime.
• ປະສິດທິພາບພະລັງງານ: Consumes only 26W, providing illumination equivalent to 150-250W metal halide and high-pressure sodium fixtures.
• ຄວາມສະຫວ່າງສູງ: Equipped with 30 LED bulbs, delivering 3000 lumens of 5000K Daylight illumination.
• ການກໍ່ສ້າງທົນທານ: Features a die-cast aluminum housing with a clear lens, offering anti-corrosion and IP65 waterproof protection.
• ອາຍຸຍືນ: ໄດ້ຮັບການຈັດອັນດັບສຳລັບການໃຊ້ງານ 50,000 ຊົ່ວໂມງ.
• Vol ກວ້າງtage ຄວາມເຂົ້າກັນໄດ້: ສະຫນັບສະຫນູນການປ້ອນຂໍ້ມູນ voltage from 100-277Vac, compatible with standard 110Vac systems.

Figure 3.1: Dusk to Dawn Sensor Operation

This diagram illustrates the automatic operation of the dusk-to-dawn sensor. It shows the light turning off during the day (sunrise) and turning on at night (sundown), with an icon indicating a 50,000-hour lifespan and a photocell sensor.

Figure 3.2: All Weather Resistance

This image highlights the weather-resistant properties of the light, including IP65 waterproof rating, frost resistance (down to -4°F), and storm resistance, depicted with icons for rain, snowflake, and wind.

ຮູບທີ 3.3: ຂະໜາດຜະລິດຕະພັນ

This image provides the physical dimensions of the wall pack light: 6.0 inches in length, 9.1 inches in height, and 3.6 inches in width.

4. ຂໍ້ມູນຈໍາເພາະ

5. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Follow these steps carefully for proper installation of your wall pack light. Ensure power is OFF before beginning.

5.1 ແຜນວາດສາຍ

The fixture uses a standard 3-wire connection: Hot, Common/Neutral, and Ground.

Figure 5.1: Two Wire Layout Options

This image illustrates two wiring layout options: an interior wire layout showing the connection to a junction box with exposed wires (black, white, green), and an external wire layout showing the light mounted on a brick wall with conduit for wiring.

5.2 ຂັ້ນຕອນການຕິດຕັ້ງ

Refer to the following steps and the accompanying image for a visual guide.

1. ເອົາເລນອອກ: Remove the two screws securing the lens to the rear housing and set the lens aside.
2. Loosen reflector screws: Loosen the two screws enough to allow the reflector to slide upward until the keyhole reflector releases from the screws. Remove the reflector.
3. Prepare mounting holes: Knock out appropriate holes in the rear housing and fasten it to the outlet box or wall using the gasket.
4. Complete wiring: Connect the fixture's wires to the power source (Hot, Common/Neutral) and ground according to local electrical codes.
5. Install reflector: Reinstall the reflector by aligning it with the screws and tightening them.
6. Install the lens: Reattach the lens to the housing using the two screws removed in step 1.

ຮູບທີ 5.2: ຂັ້ນຕອນການຕິດຕັ້ງງ່າຍໆ

This image displays a six-panel step-by-step guide for installing the wall pack light. It shows removing the lens, loosening reflector screws, knocking out mounting holes, completing wiring, installing the reflector, and finally installing the lens.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

Once properly installed and powered, the CINOTON 26W LED Wall Pack Light operates automatically.

• The integrated photocell sensor detects ambient light levels.
• When the ambient light falls below a certain threshold (e.g., at dusk), the light will automatically turn ON.
• When the ambient light rises above a certain threshold (e.g., at dawn), the light will automatically turn OFF.
• No manual intervention is required for daily operation.

7. ບໍາລຸງຮັກສາ

The CINOTON 26W LED Wall Pack Light is designed for minimal maintenance due to its durable construction and IP65 rating.

• ທໍາຄວາມສະອາດ: ເຮັດຄວາມສະອາດເລນເປັນແຕ່ລະໄລຍະດ້ວຍອ່ອນໆ, ງamp cloth to ensure optimal light output and sensor performance. Do not use abrasive cleaners or solvents.
• ການກວດກາ: Annually inspect the fixture for any signs of damage, loose connections, or wear. Ensure mounting screws remain tight.
• ບໍ່ມີສ່ວນທີ່ຜູ້ໃຊ້ບໍລິການ: The LED module and driver are integrated and not user-serviceable. Do not attempt to open or repair the internal components.

8. ການແກ້ໄຂບັນຫາ

If you encounter issues with your wall pack light, refer to the following common problems and solutions:

ຖ້າຂັ້ນຕອນການແກ້ໄຂບັນຫາບໍ່ສາມາດແກ້ໄຂບັນຫາໄດ້, ກະລຸນາຕິດຕໍ່ຝ່າຍຊ່ວຍເຫຼືອລູກຄ້າ.

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

CINOTON products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official CINOTON webເວັບໄຊ.

Please have your product model (B0FCMBWDVH) and purchase date available when contacting support.