uwant M600 Futon Cleaner Instruction Manual

1. ບົດແນະນຳ

ຂອບໃຈສໍາລັບການຊື້asing the uwant M600 Futon Cleaner. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your device. Please read this manual thoroughly before use and keep it for future reference.

Image 1.1: The uwant M600 Futon Cleaner.

2. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ທີ່​ລະ​ບຸ​ໄວ້​ຂ້າງ​ລຸ່ມ​ນີ້​ແມ່ນ​ລວມ​ຢູ່​ໃນ​ຊຸດ​ຂອງ​ທ່ານ​. ຖ້າລາຍການໃດຂາດຫາຍໄປຫຼືເສຍຫາຍ, ກະລຸນາຕິດຕໍ່ຝ່າຍຊ່ວຍເຫຼືອລູກຄ້າ.

• uwant M600 Futon Cleaner Main Unit
• Filter Sponges (3 total, 1 pre-installed)
• ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
• ບັດຮັບປະກັນ
• ແປງເຮັດຄວາມສະອາດຂະຫນາດນ້ອຍ

Image 2.1: All components included in the uwant M600 package.

3. ຕັ້ງຄ່າ

1. ການຫຸ້ມຫໍ່: ເອົາສ່ວນປະກອບທັງຫມົດອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ.
2. ການຕິດຕັ້ງຕົວກອງ: Ensure the filter sponge and cyclone unit are correctly installed in the dust cup. One filter sponge is typically pre-installed.
3. Dust Cup Attachment: Align the dust cup with the main unit's suction port and press firmly until it clicks into place.
4. ການເຊື່ອມຕໍ່ພະລັງງານ: Plug the power cord into a suitable electrical outlet. The device is corded electric and does not use batteries.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

4.1 ເປີດ/ປິດ

Press the power button located on the handle to turn the device on or off. The device will start with its default settings.

4.2 ຮູບແບບການທໍາຄວາມສະອາດ ແລະຄຸນສົມບັດ

The uwant M600 combines several technologies for effective cleaning:

• Powerful Suction (18KPa): The strong suction power effectively removes mites, hair, and fine dust from deep within fabrics.
• High-Performance Metal Beater: A newly developed metal beating bar delivers up to 60,000 high-speed beats per minute to dislodge embedded mites and dust.
• ການຂ້າເຊື້ອ UV: A 253.7nm high-transmittance UV light sterilizes surfaces. For safety, the UV light only activates when the device is in contact with a surface, preventing accidental exposure to humans or pets.
• Ultrasonic Mite Suppression: Ultrasonic waves are emitted to help suppress mite reproduction.
• 65℃ Hot Air Drying: A downward-facing air outlet at the bottom of the unit transfers motor heat to bedding, providing 65℃ hot air drying. This helps to dehumidify and prevent mite reproduction, creating a comfortable sleeping environment.
• Smart Mite Detection System: An integrated system monitors cleaning status in real-time. A green light indicates a clean state, while a red light warns of excessive mites, guiding you to more precise and efficient cleaning.

Image 4.1: The cleaner demonstrating its powerful suction and beating action.

Image 4.2: The UV light function for sterilization.

Image 4.3: The hot air drying feature in operation.

Image 4.4: The smart display indicating cleaning status (green for clean, red for high mite presence).

Image 4.5: Detail of the high-performance metal beating bar.

4.3 ການນຳໃຊ້ອະເນກປະສົງ

The uwant M600 is designed for various surfaces beyond futons, making it suitable for:

• ໂຊຟາ
• ໝອນ
• ສັດ stuffed
• ຜ້າພົມ
• ບ່ອນນັ່ງລົດ
• Pet Mats

Image 4.6: The cleaner being used on different household items.

5. ບໍາລຸງຮັກສາ

Regular maintenance ensures optimal performance and longevity of your uwant M600 Futon Cleaner.

5.1 Dust Cup and Filter Cleaning

The device features a 6-layer filter system, including a HEPA filter, for thorough dust capture.

1. ເອົາຈອກຂີ້ຝຸ່ນອອກ: Press the dust cup release button on the handle and lift the dust cup from the main unit.
2. ຈອກຂີ້ຝຸ່ນຫວ່າງເປົ່າ: Open the dust cup cover and empty collected dust and debris into a trash bin.
3. ຖອດຕົວກອງອອກ: Remove the cyclone unit and filter sponge from the dust cup.
4. ລ້າງອົງປະກອບ: The dust cup, filter sponge, cyclone unit, and roller brush unit are washable. Rinse them thoroughly with water. Warm water can make cleaning more efficient.
5. ແຫ້ງຢ່າງສົມບູນ: Ensure all washed components are completely dry before reassembling. Do not use the device with wet filters.
6. ປະກອບຄືນໃໝ່: Reinsert the filter sponge into the cyclone unit, then place it back into the dust cup. Close the dust cup cover and reattach the dust cup to the main unit.

ຮູບພາບ 5.1: ລະເບີດ view of the 6-layer filter system.

5.2 ການເຮັດຄວາມສະອາດແປງມ້ວນ

1. Remove Roller Brush Cover: Slide the two bottom plate locks simultaneously to release and lift the roller brush cover.
2. Remove Brush Unit: Take out the roller brush unit.
3. ສະອາດ: Carefully wipe away any accumulated dust or hair from the brush and the brush compartment.
4. ຕິດຕັ້ງຄືນໃໝ່: Insert one end of the roller brush unit first, then push the other end into place. Reattach the roller brush cover, ensuring it clicks securely.

6. ການແກ້ໄຂບັນຫາ

7. ຂໍ້ມູນຈໍາເພາະ

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

8.1 ການຮັບປະກັນຂອງຜູ້ຜະລິດ

The uwant M600 Futon Cleaner comes with a ການຮັບປະກັນຂອງຜູ້ຜະລິດ 2 ປີ for the main unit, covering major malfunctions under normal use. Please refer to the included warranty card for detailed terms and conditions.

8.2 ສະຫນັບສະຫນູນລູກຄ້າ

For any questions, technical assistance, or warranty claims, please contact uwant customer support through the official website or the contact information provided on your warranty card. When contacting support, please have your model number (M600) and purchase date available.

9. ຂໍ້ຄວນລະວັງຄວາມປອດໄພ

• ຖອດປລັກອຸປະກອນກ່ອນທຳຄວາມສະອາດ ຫຼື ດຳເນີນການບຳລຸງຮັກສາ.
• Do not use the device on wet surfaces or to pick up liquids.
• Keep the device away from direct sunlight and humid environments when not in use. Store it in a well-ventilated area.
• Do not allow children to operate the device unsupervised.
• Ensure all filters are completely dry before reassembling and using the device.
• Do not look directly at the UV light when it is active. The safety mechanism is designed to prevent exposure during normal use.