ORIA Digital Refrigerator and Freezer Thermometer WA181 User Manual

ແນະນຳ

Thank you for choosing the ORIA Digital Refrigerator and Freezer Thermometer. This device is designed to monitor temperature and humidity in your refrigerator, freezer, or other environments using its main unit and two wireless sensors. Please read this manual carefully before use to ensure proper operation and longevity of the product.

ສິນຄ້າເກີນview

ສ່ວນປະກອບລວມ:

• 1 x ໜ່ວຍສະແດງຜົນຫຼັກ
• 2 x ເຊັນເຊີໄລຍະໄກໄຮ້ສາຍ
• 1 x ຄູ່ມືຜູ້ໃຊ້
• 1 x USB Data Cable (for main unit power)
• 1 x Magnetic Plate (for main unit installation)

Main Unit Display Features:

ຮູບພາບ: ລາຍລະອຽດ view of the main display unit, showing various indicators for time, date, indoor temperature/humidity, sensor 1 temperature/humidity, and sensor 2 temperature/humidity, along with control buttons.

• ອຸນຫະພູມ ແລະ ຄວາມຊຸ່ມຊື່ນພາຍໃນ: Displays current conditions at the main unit's location.
• Sensor 1 Temperature & Humidity: Shows readings from the first wireless sensor (green zone).
• Sensor 2 Temperature & Humidity: Shows readings from the second wireless sensor (blue zone).
• ເວລາແລະວັນທີ: Current time and calendar display.
• ບັນທຶກສູງສຸດ/ນາທີ: Tracks highest and lowest temperature/humidity for each channel.
• ຕົວ​ຊີ້​ວັດ​ການ​ປຸກ​: Visual alerts for temperature deviations.

ຕັ້ງຄ່າ

ການ​ຕິດ​ຕັ້ງ​ຫມໍ້​ໄຟ​:

1. ຫົວໜ່ວຍຫຼັກ: Open the battery compartment on the back. Insert 3 x AAA batteries (not included), ensuring correct polarity (+/-).
2. ເຊັນເຊີໄຮ້ສາຍ: Open the battery compartment on each sensor. Insert 2 x AA batteries (not included) into each sensor, observing correct polarity.

Note: The main unit can also be powered via the included USB cable. When powered by USB, the backlight remains on and offers three brightness levels.

Sensor Synchronization:

After installing batteries in both the main unit and sensors, the sensors will automatically attempt to synchronize with the main unit. This process may take a few moments. Ensure sensors are within range of the main unit during initial setup.

ຄໍາແນະນໍາການດໍາເນີນງານ

ຈໍສະແດງຜົນພື້ນຖານ:

The main unit displays indoor temperature and humidity, along with readings from Sensor 1 and Sensor 2. Each sensor's data is presented in a distinct color zone (green for Sensor 1, blue for Sensor 2) for easy identification.

Temperature Unit Selection (℃/℉):

ກົດ ໂໝດ button to cycle through display modes. To change the temperature unit between Celsius (℃) and Fahrenheit (℉), locate the dedicated button (often labeled ℃ / ℉ or integrated with another button like +/-) and press it.

ບັນທຶກສູງສຸດ/ນາທີ:

The device records maximum and minimum temperature and humidity values for the past 24 hours or since the last reset. Briefly press the +/- button to switch between 24-hour and all-time record modes. To clear the records, press and hold the +/- ປຸ່ມ.

ການຄວບຄຸມໄຟຫຼັງ:

• ພະລັງງານຫມໍ້ໄຟ: The backlight activates for 10 seconds when any button is pressed.
• USB Power: The backlight remains continuously on. Press the backlight button (if available) or a specific button combination to adjust between three brightness levels.

Image: Illustration of the main unit connected via USB for continuous backlight and battery compartment for battery-only operation.

ຟັງຊັ່ນການແຈ້ງເຕືອນອຸນຫະພູມ

The thermometer features an adjustable alarm function for both wireless sensors. You can set specific maximum and minimum temperature thresholds.

Image: Visual representation of wireless sensors placed in a refrigerator and freezer, with the main unit displaying an active temperature alarm.

ການ​ຕັ້ງ​ຄ່າ​ປຸກ​:

1. ກົດ CH1 or CH2 button to select the sensor channel you wish to configure.
2. ກົດຄ້າງໄວ້ ແຈ້ງເຕືອນ button (or a similar button, refer to the specific manual for exact button labels) until the alarm temperature settings begin to flash.
3. ໃຊ້ +/- buttons to adjust the desired maximum and minimum temperature thresholds.
4. ກົດ ແຈ້ງເຕືອນ button again to confirm and save the settings.

If the temperature in a monitored zone exceeds or falls below the set thresholds, the main unit will emit an audible alarm for two minutes. Press the -/RF ປຸ່ມ view pre-set alarm temperatures.

ການຕິດຕັ້ງ

The main unit and wireless sensors offer multiple installation options for convenience.

Image: The main unit illustrating its built-in stand, magnetic back, and hanging hole for versatile placement.

ຕຳແໜ່ງຂອງໜ່ວຍຫຼັກ:

• ຢືນ: Use the integrated kickstand on the back to place the unit on a countertop or shelf.
• ໄຟລ໌ແນບແມ່ເຫຼັກ: Attach the provided magnetic plate to the back of the main unit and then secure it to any metallic surface, such as a refrigerator door.
• ຕົວຍຶດຕິດWallາ: Utilize the hanging hole on the back to mount the unit on a wall using a screw or hook (not included).

Wireless Sensor Placement:

Image: A wireless sensor positioned inside a refrigerator, demonstrating its remote monitoring capability.

• Place the wireless sensors inside your refrigerator, freezer, or any other area you wish to monitor.
• Ensure the sensors are placed vertically as indicated in the instructions for optimal performance.
• The maximum transmission distance is approximately 100 meters (328 feet) in open areas. Walls and obstacles may reduce this range.

ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: ເຊັດໜ່ວຍຫຼັກ ແລະ ເຊັນເຊີດ້ວຍຜ້າອ່ອນໆ, ເຊັດໃຫ້ສະອາດ.amp ຜ້າ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືແຊ່ນ້ໍາ.
• ການປ່ຽນແບັດເຕີຣີ: When the low battery icon appears on the display, replace the batteries promptly. For the main unit, use 3 x AAA batteries. For each wireless sensor, use 2 x AA batteries.
• ການເກັບຮັກສາ: If not in use for an extended period, remove all batteries to prevent leakage and store the device in a cool, dry place.

ການແກ້ໄຂບັນຫາ

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ORIA is committed to providing high-quality products and customer service.

• ການຮັບປະກັນ: ຜະລິດຕະພັນນີ້ມາພ້ອມກັບການຮັບປະກັນ 1 ປີນັບຕັ້ງແຕ່ວັນທີຊື້.
• ຜົນຕອບແທນ: Enjoy a 30-day hassle-free return policy.
• ການຊ່ວຍເຫຼືອລູກຄ້າ: For any questions, issues, or technical assistance, please contact ORIA customer service. We aim to respond within 24 hours and provide lifetime after-sales support.