ECOELER 6-Inch Motion Sensor LED Ceiling Light

1. ບົດແນະນຳ

Thank you for choosing the ECOELER 6-Inch Motion Sensor LED Ceiling Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

ຮູບພາບ 1.1: ດ້ານຫນ້າ view of the ECOELER 6-Inch Motion Sensor LED Ceiling Light.

2. ຂໍ້ມູນຄວາມປອດໄພ

ເພື່ອຫຼຸດຜ່ອນຄວາມສ່ຽງຕໍ່ການເກີດອັກຄີໄພ, ໄຟຟ້າຊ໊ອກ, ຫຼືການບາດເຈັບສ່ວນບຸກຄົນ, ປະຕິບັດຕາມຄວາມລະມັດລະວັງດ້ານຄວາມປອດໄພຂັ້ນພື້ນຖານເຫຼົ່ານີ້ສະເຫມີ:

• ຄຳເຕືອນ: ຄວາມສ່ຽງຕໍ່ການເກີດໄຟຟ້າຊັອດ. ຕັດສາຍໄຟທີ່ຟິວ ຫຼືຕົວຕັດວົງຈອນກ່ອນຕິດຕັ້ງ ຫຼືໃຫ້ບໍລິການ.
• ຜະລິດຕະພັນນີ້ຕ້ອງໄດ້ຮັບການຕິດຕັ້ງຕາມລະຫັດການຕິດຕັ້ງທີ່ໃຊ້ໄດ້ໂດຍບຸກຄົນທີ່ຄຸ້ນເຄີຍກັບການກໍ່ສ້າງແລະການດໍາເນີນງານຂອງຜະລິດຕະພັນແລະອັນຕະລາຍທີ່ກ່ຽວຂ້ອງ.
• Use only 120V AC, 60Hz circuits.
• ຢ່າພະຍາຍາມຖອດປະກອບ ຫຼືດັດແປງອຸປະກອນ. ບໍ່ມີສ່ວນທີ່ຜູ້ໃຊ້ບໍລິການພາຍໃນ.
• ໃຫ້ແນ່ໃຈວ່າການເຊື່ອມຕໍ່ທັງຫມົດແມ່ນປອດໄພແລະຖືກ insulated ຢ່າງຖືກຕ້ອງ.
• fixture ນີ້ແມ່ນເຫມາະສົມສໍາລັບການນໍາໃຊ້ພາຍໃນເຮືອນເທົ່ານັ້ນ.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ອົງ​ປະ​ກອບ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ກ່ອນ​ທີ່​ຈະ​ເລີ່ມ​ຕົ້ນ​ການ​ຕິດ​ຕັ້ງ​:

• 6-Inch Black Motion Sensor LED Ceiling Light (x1)
• ຮາດແວຕິດຕັ້ງ (ສະກູ, ແກ່ນສາຍ)
• E26 Adapter Accessories (for recessed can installation)
• ຄູ່ມືແນະ ນຳ (ເອກະສານນີ້)

Image 3.1: Included accessories for installation.

4. ຄຸນລັກສະນະຂອງຜະລິດຕະພັນ

• 3CCT ສາມາດເລືອກໄດ້: Choose between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) color temperatures.
• ເຊັນເຊີກວດຈັບການເຄື່ອນໄຫວ: Passive Infrared (PIR) sensor detects motion within 9-16 feet.
• ການຊັກຊ້າເວລາທີ່ສາມາດປັບໄດ້: Set the light to remain on for 30 seconds, 1 minute, or 5 minutes after motion ceases.
• ເຊັນເຊີແສງ: The motion sensor functions only in dark environments, remaining off during daylight hours.
• ປະສິດທິພາບພະລັງງານ: 16W LED provides 1000 lumens of brightness.
• ການຕິດຕັ້ງອະເນກປະສົງ: Compatible with 3.5 or 4-inch junction boxes and 5 or 6-inch recessed cans.

Image 4.1: Key features including PIR sensor, 3CCT, and time delay settings.

5. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Before installation, ensure the power supply is turned off at the circuit breaker.

5.1. ການຕິດຕັ້ງ Junction Box

1. ເອົາເລນອອກໂດຍການບິດມັນຕາມເຂັມໂມງ.
2. Connect the supply wires to the fixture wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green (ground).
3. Attach the fixture base to the junction box using the provided screws.
4. Twist the lens counter-clockwise to secure it back onto the fixture.

5.2. Recessed Can Installation

1. ເອົາເລນອອກໂດຍການບິດມັນຕາມເຂັມໂມງ.
2. Install the spring clips onto the fixture base using screws.
3. Connect the E26 adapter to the existing socket in the recessed can.
4. Connect the fixture wires to the E26 adapter wires using wire nuts.
5. Push the disk light into the recessed can until the spring clips secure it.
6. Twist the lens counter-clockwise to secure it back onto the fixture.

Image 5.1: Installation diagrams for junction box and recessed can.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

After successful installation and restoring power, the light will be ready for operation. The ECOELER motion sensor light operates automatically based on ambient light and motion detection.

6.1. ໜ້າທີ່ຂອງເຊັນເຊີການເຄື່ອນໄຫວ

• ເວລາກາງເວັນ: The light remains off even if motion is detected, due to the integrated light sensor.
• Nighttime/Dark Environments: The light will automatically turn on when motion is sensed within its detection range (approximately 9-16 feet).
• The light will turn off after the set time delay if no further motion is detected.

Image 6.1: Motion sensor operation during day and night.

6.2. Color Temperature (CCT) Adjustment

The fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). To adjust the CCT:

1. ໃຫ້ແນ່ໃຈວ່າປິດໄຟ.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the CCT selector switch on the LED board (refer to Image 4.1).
4. Slide the switch to your desired color temperature setting (3000K, 4000K, or 5000K).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.2: Visual representation of 3CCT options.

6.3. Time Delay Adjustment

The light can be set to remain on for 30 seconds, 1 minute, or 5 minutes after motion is no longer detected. To adjust the time delay:

1. ໃຫ້ແນ່ໃຈວ່າປິດໄຟ.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the time delay selector switch on the fixture (refer to Image 4.1).
4. Slide the switch to your desired time setting (30s, 1min, or 5mins).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.3: Time delay countdown feature.

7. ບໍາລຸງຮັກສາ

The ECOELER LED ceiling light requires minimal maintenance.

• ທໍາຄວາມສະອາດ: ໃຫ້ແນ່ໃຈວ່າໄຟຟ້າຖືກປິດກ່ອນທຳຄວາມສະອາດ. ເຊັດອຸປະກອນດ້ວຍຜ້າອ່ອນ, ແຫ້ງ ຫຼື ເຊັດເບົາໆ.amp ຜ້າ. ຢ່າໃຊ້ສານເຄມີທີ່ຮຸນແຮງ ຫຼື ນໍ້າຢາທໍາຄວາມສະອາດທີ່ມີສີຂັດ, ເພາະມັນອາດຈະທໍາລາຍຊັ້ນເຄືອບ ຫຼື ອົງປະກອບເອເລັກໂຕຣນິກໄດ້.
• ເລນ: Keep the lens clean to ensure optimal light output and motion sensor performance.

8. ການແກ້ໄຂບັນຫາ

If you experience issues with your ECOELER LED ceiling light, refer to the following common problems and solutions:

9. ຂໍ້ມູນຈໍາເພາະ

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

This ECOELER product is backed by a Limited Warranty. For specific warranty details and duration, please refer to the documentation included with your purchase or contact ECOELER customer support.

For technical assistance, troubleshooting, or warranty claims, please contact ECOELER customer support through the retailer where the product was purchased or visit the official ECOELER webເວັບໄຊ.

ຜູ້ຜະລິດ: ECOELER ELECTRIC INC