1. ບົດແນະນຳ
The Intelbras IVP 7000 SMART EX is a wireless passive infrared (PIR) motion sensor designed for robust and reliable intrusion detection. It incorporates advanced signal analysis technology to ensure efficient detection while minimizing false alarms. This sensor is particularly suited for outdoor environments and areas with a high risk of intrusion, offering enhanced security for your property.
This manual provides detailed instructions for the installation, operation, and maintenance of your IVP 7000 SMART EX sensor. Please read it carefully before proceeding with installation and use.
2. ຄຸນນະສົມບັດທີ່ສໍາຄັນ
- ຄວາມຕ້ານທານຂອງສັດລ້ຽງ: Designed to ignore pets weighing up to 30 kg (approximately 66 lbs), reducing false alarms caused by animals.
- Dual PIR Detection: Utilizes two passive infrared sensors for more accurate and reliable motion detection.
- Adjustable PIR Sensitivity: Allows customization of detection sensitivity to suit specific environmental conditions.
- ຕົວຊີ້ວັດສະຖານະພາບ LED: Provides visual feedback on detection events and sensor status.
- ຕ້ານ Tampສະຫຼັບ er: Triggers an alarm if the sensor cover is opened or the unit is forcibly removed from its mounting location.
- Articulated Mounting Bracket: Includes a flexible bracket for easy and precise positioning during installation.
- ຕົວຊີ້ບອກແບັດເຕີຣີຕໍ່າ: Notifies users when the battery level is low, ensuring continuous operation.
- ການກັ່ນຕອງແສງ: Enhances detection accuracy and reduces interference from external light sources.
3. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Proper installation is crucial for optimal performance of your IVP 7000 SMART EX sensor. Follow these steps carefully.
3.1 Unboxing ແລະການກວດສອບອົງປະກອບ
ກ່ອນທີ່ຈະຕິດຕັ້ງ, ໃຫ້ແນ່ໃຈວ່າອົງປະກອບທັງຫມົດມີຢູ່:
- IVP 7000 SMART EX Sensor Unit
- Articulated Mounting Bracket
- Screws and Wall Plugs for mounting
- ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
3.2 ການຕິດຕັ້ງຫມໍ້ໄຟ
The sensor operates on batteries (type not specified, typically 3V lithium). Open the sensor casing carefully to access the battery compartment. Insert the batteries, observing the correct polarity (+/-). Close the casing ຢ່າງປອດໄພ.
3.3 ການເລືອກສະຖານທີ່ຕິດຕັ້ງ
ເລືອກທີ່ຕັ້ງການຕິດຕັ້ງທີ່ສະຫນອງການບໍ່ມີສິ່ງກີດຂວາງ view of the area to be protected. Avoid aiming the sensor directly at heat sources, reflective surfaces, or areas with strong air currents. For outdoor use, consider protection from direct rain and sunlight, although the sensor is designed for outdoor environments.
ຮູບ 1: ດ້ານຫນ້າ view of the IVP 7000 SMART EX sensor, showing the PIR lens and Intelbras branding.
ຮູບ 2: ຂ້າງ view of the IVP 7000 SMART EX sensor, illustrating its profile and weather-resistant design.
3.4 ການຕິດຕັ້ງທາງກາຍະພາບ
- Attach the articulated mounting bracket to the desired wall or surface using the provided screws and wall plugs. Ensure it is firmly secured.
- Mount the IVP 7000 SMART EX sensor onto the articulated bracket.
- Adjust the sensor's angle using the bracket to cover the intended detection area.
ຮູບ 3: ກັບຄືນໄປບ່ອນ view of the IVP 7000 SMART EX sensor, highlighting the mounting points for the articulated bracket.
3.5 Pairing with Control Panel (Wireless Configuration)
Refer to your security system's control panel manual for specific instructions on how to pair a new wireless sensor. Generally, this involves putting the control panel into 'learning' mode and then triggering the sensor (e.g., by opening the tamper switch or walking in front of it) to register it with the system.
3.6 PIR Sensitivity Adjustment
The sensor features adjustable PIR sensitivity. Consult the internal dip switches or potentiometer (if present) inside the sensor casing to fine-tune the detection range and responsiveness. Test the sensor after adjustment to ensure optimal performance and pet immunity.
4. ຄໍາແນະນໍາການດໍາເນີນງານ
Once installed and configured, the IVP 7000 SMART EX operates automatically to detect motion.
4.1 ການກວດຈັບການເຄື່ອນໄຫວ
The dual PIR sensors detect changes in infrared radiation caused by movement of warm bodies. When motion is detected within its coverage area, the sensor transmits a signal to the connected control panel.
4.2 ຕົວຊີ້ວັດ LED
The LED indicator on the sensor provides visual feedback:
- Brief Flash: Indicates motion detection.
- Continuous Light/Specific Pattern: May indicate low battery or a tamper event (refer to specific model documentation for exact patterns).
4.3 Pet Immunity
The pet immunity feature allows pets up to 30 kg to move freely within the detection zone without triggering an alarm. For this feature to work effectively, ensure the sensor is mounted at the recommended height and its sensitivity is correctly adjusted, as described in the setup section.
5. ບໍາລຸງຮັກສາ
Regular maintenance ensures the longevity and reliable operation of your sensor.
- ທໍາຄວາມສະອາດ: Periodically clean the sensor lens with a soft, dry cloth to remove dust, dirt, or cobwebs that could obstruct detection. Do not use abrasive cleaners or solvents.
- ການປ່ຽນແບັດເຕີຣີ: When the low battery indicator activates, replace the batteries promptly. Use only recommended battery types.
- ກວດກາປົກກະຕິ: Test the sensor periodically (e.g., monthly) by walking through its detection zone to ensure it is functioning correctly and communicating with the control panel.
- Tampສະຫຼັບ er: Ensure the sensor casing is always securely closed to prevent tamper ປຸກ.
6. ການແກ້ໄຂບັນຫາ
If you encounter issues with your IVP 7000 SMART EX sensor, refer to the following common problems and solutions.
- ສັນຍານເຕືອນທີ່ບໍ່ຖືກຕ້ອງ:
- Check for heat sources (heaters, direct sunlight) or strong air currents (vents, open windows) in the detection zone.
- Adjust PIR sensitivity to a lower setting.
- Ensure pet immunity is correctly configured and pets are within the specified weight limit.
- ເຮັດຄວາມສະອາດເລນເຊັນເຊີ.
- ບໍ່ມີການກວດຫາ:
- Verify batteries are correctly installed and not depleted. Replace if necessary.
- Check if the sensor is properly paired with the control panel.
- ຮັບປະກັນວ່າພື້ນທີ່ກວດຈັບບໍ່ມີສິ່ງກີດຂວາງ.
- Increase PIR sensitivity if needed.
- ຕົວຊີ້ບອກແບັດເຕີຣີຕໍ່າ:
- Replace the batteries immediately with new ones of the correct type.
- Tamper ປຸກ:
- Ensure the sensor casing is fully closed and secured.
- Check if the sensor is firmly mounted to prevent accidental removal.
7. ຂໍ້ມູນຈໍາເພາະ
| ຜູ້ຜະລິດ | Intelbras (Generic in listing, but Intelbras on product) |
| ຕົວແບບ | IVP 7000 SMART EX |
| ສີ | ສີຂາວ |
| ປະເພດແຫຼ່ງພະລັງງານ | Electric Power (typically battery-operated for wireless sensors, with electric power referring to the system it connects to) |
| ສະບັບtage | 12V (likely for the system, sensor itself uses lower voltage batteries) |
| ຈໍານວນຜະລິດຕະພັນ | 1 |
| ປະເພດການຕິດຕັ້ງ | ຕິດຝາ |
| ຂະໜາດສິນຄ້າ (L x W x H) | 10ຊມ x 10ຊມ x 2ຊມ (3.94 x 3.94 x 0.79 ນິ້ວ) |
| ພູມຕ້ານທານສັດລ້ຽງ | ສູງເຖິງ 30 ກິໂລ |
| ປະເພດການຊອກຄົ້ນຫາ | Dual PIR (Passive Infrared) |
| ຄຸນນະສົມບັດພິເສດ | Adjustable PIR Sensitivity, LED Status Indicator, Anti-Tamper Switch, Optical Filter |
8. ຂໍ້ມູນການຮັບປະກັນ
This product is covered by a standard manufacturer's warranty. For specific details regarding warranty duration, coverage, and claims process, please refer to the warranty card included with your purchase or visit the official Intelbras webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮັບປະກັນຄວາມຖືກຕ້ອງ.
9. ສະຫນັບສະຫນູນ
For technical assistance, troubleshooting beyond this manual, or product inquiries, please contact Intelbras customer support. Contact information can typically be found on the manufacturer's webສະຖານທີ່ຫຼືຢູ່ໃນການຫຸ້ມຫໍ່ຜະລິດຕະພັນ.
ຊັບພະຍາກອນອອນໄລນ໌: Visit the Intelbras official webເວັບໄຊສໍາລັບ FAQs, ຄູ່ມືການປັບປຸງ, ແລະການດາວໂຫຼດຊອບແວ.
ບໍລິການລູກຄ້າ: Refer to your product packaging or the Intelbras webເວັບໄຊທ໌ສໍາລັບເບີໂທລະສັບແລະການສະຫນັບສະຫນູນອີເມວ.
