ANNKE 2MP Security Camera System User Manual

1. ບົດແນະນຳ

This manual provides detailed instructions for the installation, operation, and maintenance of your ANNKE 2MP Security Camera System. This system features an 8-channel hybrid 5-in-1 DVR, 3K add-on bullet cameras with full-color night vision, and advanced AI human/vehicle detection capabilities. Please read this manual thoroughly before using the product to ensure proper setup and optimal performance.

2. ຜະລິດຕະພັນເກີນview

The ANNKE 2MP Security Camera System is designed for comprehensive surveillance, offering versatile recording and monitoring options.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• 5-in-1 Hybrid DVR: Supports up to 8 TVI, AHD, CVI, CVBS cameras and 2 additional IP cameras, providing flexible compatibility.
• 3K ColorVu Full Color Night Vision: Captures 3K resolution at 20 frames per second with f/1.0 aperture for clear, full-color images in low-light conditions without supplementary lighting.
• 3K Built-in Microphone Cameras: Provides 2960x1665 resolution at 20fps with a 16:9 aspect ratio and integrated audio recording.
• Advanced H.265+ Video Format: Optimizes storage space by up to 80% compared to H.264, allowing for longer recording times and smooth streaming.
• Customized AI Human/Vehicle Detection: Configurable motion detection zones with instant app pushes and email alerts, specifically identifying human and vehicle events.
• IP67 ກ້ອງ​ຖ່າຍ​ຮູບ​ກັນ​ອາ​ກາດ​: Designed to withstand extreme temperatures from -40°C to 40°C (-22°F to 140°F) and protected against dust and water ingress.

DVR Modes:

The DVR operates in two primary modes, offering flexibility for your surveillance needs:

ຮູບທີ 2.1: The ANNKE DVR supports two operational modes: a hybrid mode for 8 BNC cameras plus 2 IP cameras, or a pure NVR mode for up to 10 IP cameras.

• Hybrid Mode (8+2): Supports up to 8 BNC (TVI, AHD, CVI, CVBS) cameras and 2 additional IP cameras.
• NVR Mode (10 IP Cameras): Functions as a Network Video Recorder, supporting up to 10 IP cameras.

3. ຄູ່ມືການຕິດຕັ້ງ

Follow these steps to set up your ANNKE Security Camera System.

3.1 DVR Connection

1. ເຊື່ອມຕໍ່ພະລັງງານ: Plug the DVR power adapter into the DVR and a power outlet.
2. ຕິດ​ຕາມ​ກວດ​ກາ​: ໃຊ້ສາຍ HDMI ຫຼື VGA ເພື່ອເຊື່ອມຕໍ່ DVR ກັບຈໍພາບ.
3. ເຊື່ອມຕໍ່ຫນູ: ສຽບເມົ້າ USB ເຂົ້າກັບພອດ USB ໃນເຄື່ອງ DVR.
4. ເຊື່ອມຕໍ່ເຄືອຂ່າຍ (ທາງເລືອກ): For remote access, connect an Ethernet cable from the DVR to your router.
5. Install Hard Drive (if applicable): If your system did not come with a pre-installed hard drive, refer to the separate hard drive installation guide.

3.2 ການຕິດຕັ້ງກ້ອງຖ່າຍຮູບ

The bullet cameras are designed for versatile placement and are built to withstand various weather conditions.

ຮູບທີ 3.1: The camera features a 2.8mm lens, providing a wide 102-degree field of view for broader surveillance coverage.

ຮູບທີ 3.2: The cameras are IP67 rated, ensuring protection against dust and water, and can operate in temperatures from -40°C to 40°C.

1. ເລືອກສະຖານທີ່: ເລືອກສະຖານທີ່ທີ່ສະໜອງຂໍ້ມູນທີ່ຕ້ອງການ view (102° wide angle) and is within reach of the camera cables. Consider areas prone to human or vehicle activity for optimal AI detection.
2. Mount Camera: Securely mount the camera using the provided screws. Adjust the camera angle for optimal coverage.
3. Connect Camera to DVR: Connect the camera's BNC cable to an available video input port on the DVR. Connect the camera's power cable to a power adapter and then to a power outlet.
4. ເປີດ: Once all connections are made, power on the DVR and cameras.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

Learn how to operate your ANNKE Security Camera System for effective surveillance.

4.1 Initial Setup and DVR Interface

1. ເຂົ້າສູ່ລະບົບຄັ້ງທຳອິດ: Upon first boot, follow the on-screen prompts to set up a strong password for your DVR.
2. ການຕັ້ງຄ່າລະບົບ: Navigate the DVR menu using the mouse to configure date/time, video settings, and network settings.

4.2 AI Human/Vehicle Detection

The system's advanced AI can differentiate between humans, vehicles, and other motion, reducing false alarms.

ຮູບທີ 4.1: The AI detection system accurately identifies and distinguishes between human and vehicle presence within the surveillance area.

ຮູບທີ 4.2: Configure specific detection zones to focus on critical areas, and leverage AI to filter alerts for human and vehicle activity.

1. Access Detection Settings: From the DVR menu, navigate to Event > Motion Detection or ການກວດຫາ AI.
2. Configure Detection Zones: Draw specific areas on the camera's live view where you want motion or AI detection to be active.
3. Enable Human/Vehicle Detection: Activate the AI detection feature for selected channels.
4. Set Up Alerts: Configure the system to send instant app pushes and email alerts with snapshots when human or vehicle events are detected.

4.3 ວິໄສທັດກາງຄືນສີເຕັມຮູບແບບ

The 3K ColorVu technology provides vivid, full-color surveillance even in extremely low light conditions.

ຮູບທີ 4.3: Experience clear, full-color video footage at night, enhancing detail and identification.

This feature activates automatically in low-light environments. Ensure no obstructions block the camera's view to maximize its effectiveness.

4.4 ການບັນທຶກສຽງ

The built-in microphone in the 3K cameras allows for one-way audio recording, adding an extra layer of security.

ຮູບທີ 4.4: The built-in microphone captures audio, providing context to video recordings.

1. ເປີດໃຊ້ສຽງ: In the DVR's channel settings, ensure audio recording is enabled for the cameras with built-in microphones.
2. Playback Audio: During video playback, ensure your monitor or playback device has audio output enabled to hear recorded sound.

4.5 ການເຂົ້າເຖິງໄລຍະໄກ

Access your security system from anywhere using the ANNKE mobile application.

ຮູບທີ 4.5: Download the ANNKE app from Google Play or the App Store for remote viewການ​ຄວບ​ຄຸມ​ແລະ​.

1. ດາວໂຫລດແອັບ:: ຊອກຫາ the official ANNKE app on Google Play Store (for Android) or Apple App Store (for iOS).
2. ລົງທະບຽນບັນຊີ: ສ້າງບັນຊີແລະເຂົ້າສູ່ລະບົບ.
3. ເພີ່ມອຸປະກອນ: Follow the in-app instructions to add your DVR by scanning its QR code or manually entering its details.
4. ດໍາລົງຊີວິດ View & ຫຼິ້ນຄືນ: ເມື່ອເພີ່ມ, ທ່ານສາມາດ view ດໍາລົງຊີວິດ footage, play back recordings, and receive alerts directly on your mobile device.

5. ບໍາລຸງຮັກສາ

ການບຳລຸງຮັກສາເປັນປະຈຳຮັບປະກັນອາຍຸການໃຊ້ງານທີ່ຍາວນານ ແລະ ປະສິດທິພາບທີ່ດີທີ່ສຸດຂອງລະບົບຄວາມປອດໄພຂອງທ່ານ.

• ກ້ອງຖ່າຍຮູບທີ່ສະອາດ: ເຮັດຄວາມສະອາດເລນກ້ອງຖ່າຍຮູບເປັນໄລຍະໆດ້ວຍອ່ອນໆ, ງamp ຜ້າເພື່ອກຳຈັດຝຸ່ນ ແລະ ຮອຍເປື້ອນ ທີ່ອາດສົ່ງຜົນກະທົບຕໍ່ຄວາມຊັດເຈນຂອງຮູບພາບ.
• ກວດສອບສາຍ: Inspect all cables for wear, damage, or loose connections. Secure any loose cables.
• ການອັບເດດເຟີມແວ: Check the ANNKE official website for firmware updates for your DVR and cameras. Keeping firmware updated can improve performance and add new features.
• ສຸຂະພາບຮາດດິດ: If a hard drive is installed, monitor its health through the DVR's system settings. Back up important recordings regularly.
• ວົງຈອນພະລັງງານ: If experiencing minor issues, try power cycling the DVR (unplug and replug after 10 seconds).

6. ການແກ້ໄຂບັນຫາ

ພາກສ່ວນນີ້ແກ້ໄຂບັນຫາທົ່ວໄປທີ່ທ່ານອາດຈະພົບ.

ບໍ່ມີການສະແດງວິດີໂອຢູ່ເທິງຈໍພາບ:

• ໃຫ້ແນ່ໃຈວ່າ DVR ເປີດຢູ່ ແລະອະແດັບເຕີໄຟເຊື່ອມຕໍ່ຢ່າງປອດໄພ.
• Check the HDMI/VGA cable connection between the DVR and the monitor. Try a different cable or monitor.
• Verify the monitor input source is correctly selected (HDMI/VGA).

ບໍ່ມີຮູບກ້ອງຖ່າຍຮູບ:

• Check if the camera is receiving power. The camera's IR lights (if applicable) should be visible in the dark.
• Ensure the BNC cable is securely connected to both the camera and the DVR.
• Try connecting the camera to a different DVR channel or a known working camera to the problematic channel to isolate the issue.

ບໍ່ມີການເຂົ້າເຖິງໄລຍະໄກ:

• Verify the DVR is connected to the internet via an Ethernet cable and has a valid IP address.
• ກວດເບິ່ງການເຊື່ອມຕໍ່ອິນເຕີເນັດຂອງ router ຂອງທ່ານ.
• Ensure the ANNKE app is updated to the latest version.
• Re-add the device to the app if necessary.

ກວດຈັບການເຄື່ອນໄຫວບໍ່ເຮັດວຽກ:

• Ensure motion detection is enabled for the specific camera channel in the DVR settings.
• Verify that detection zones are correctly configured and cover the desired areas.
• ປັບການຕັ້ງຄ່າຄວາມອ່ອນໄຫວຖ້າຈຳເປັນ.

7. ຂໍ້ມູນຈໍາເພາະ

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ANNKE products come with a standard warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ANNKE webເວັບໄຊ.

For technical support, product inquiries, or further assistance, please contact ANNKE customer service through their official channels. You can often find support resources, FAQs, and contact information on the ANNKE website or through the ANNKE mobile application.

ANNKE Official Store: Visit the ANNKE Store on Amazon