ເຄສຄອມພິວເຕີ MONTECH HS01 PRO ATX ລະດັບກາງ

1. ບົດແນະນຳ

The MONTECH HS01 PRO is an advanced ATX Mid-Tower PC case designed for high-performance gaming systems. It features a unique reversible layout, excellent airflow capabilities, and user-friendly toolless panels for easy assembly and maintenance. This manual provides detailed instructions for setting up, operating, and maintaining your HS01 PRO PC case.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• ການອອກແບບປີ້ນກັບກັນ: A top-down reversible layout allows the entire setup to be positioned on either the left or right side.
• ການລະບາຍອາກາດແນວຕັ້ງ: ທໍ່ຮັບອາກາດທາງລຸ່ມ ແລະ ທໍ່ລະບາຍອາກາດທາງເທິງສ້າງຜົນກະທົບຂອງປ່ອງຄວັນໄຟຕາມທຳມະຊາດເພື່ອການລະບາຍຄວາມຮ້ອນຢ່າງມີປະສິດທິພາບ.
• Durability with One-Piece Bezel: A seamless front bezel enhances structural strength and stability.
• GPU ຕິດຕັ້ງແນວຕັ້ງໄດ້ແລ້ວ: ຊ່ອງ PCIe ທີ່ສາມາດໝຸນໄດ້ຊ່ວຍໃຫ້ສາມາດຕັ້ງຄ່າ GPU ແນວຕັ້ງໄດ້ທັນທີໂດຍບໍ່ຕ້ອງໃຊ້ຕົວຖື ຫຼື ຂາຕັ້ງເພີ່ມເຕີມ.
• ການອອກແບບແບບຈົມລົງ: ພັດລົມດ້ານລຸ່ມ ແລະ ຮູບແບບແຜງວົງຈອນຫຼັກຮັກສາດ້ານຂ້າງທີ່ສະອາດ ແລະ ບໍ່ມີສິ່ງກີດຂວາງ view.
• ພັດລົມທີ່ຕິດຕັ້ງໄວ້ລ່ວງໜ້າ: ມາພ້ອມກັບພັດລົມ GF120 V2 ARGB 5 ໂຕທີ່ຕິດຕັ້ງໄວ້ລ່ວງໜ້າ, ສາມາດຊິ້ງຄ໌ກັບການຄວບຄຸມໄຟຂອງເມນບອດໄດ້ຢ່າງເຕັມທີ່.

2. ຜະລິດຕະພັນເກີນview

Familiarize yourself with the components and layout of your MONTECH HS01 PRO PC case.

ຮູບ 2.1: ດ້ານຫນ້າ view ຂອງເຄສຄອມພິວເຕີ MONTECH HS01 PRO, ສະແດງasing the mesh front panel and pre-installed ARGB fans.

ຮູບທີ 2.2: ພາຍໃນ view of the MONTECH HS01 PRO PC Case, highlighting the spacious interior and fan placement.

ຜອດ I/O:

Figure 2.3: Front I/O panel showing USB 3.0 ports, Type-C port, microphone jack, audio jack, power button, and LED button.

• ພອດ USB 3.0: ສອງພອດສໍາລັບການໂອນຂໍ້ມູນຄວາມໄວສູງ.
• ພອດ USB Type-C: One reversible Type-C connector.
• ສຽງ Jacks: Separate microphone and headphone jacks.
• ປຸ່ມເປີດປິດ: ເພື່ອເປີດ / ປິດລະບົບ.
• ປຸ່ມ LED: To cycle through ARGB lighting modes.

3. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Follow these steps for proper installation of your PC components into the HS01 PRO case.

3.1 Reversible Layout Configuration

The HS01 PRO features a reversible design, allowing you to orient the case to display your build from either the left or right side. This involves re-orienting the internal components and panels.

Figure 3.1: The HS01 PRO case demonstrating its reversible layout capability, allowing for left or right side display.

Refer to the detailed instructions in the included physical manual for specific steps on reversing the layout, as it involves disassembling and reassembling certain internal structures.

3.2 ການຕິດຕັ້ງເມນບອດ

The HS01 PRO supports Mini-ITX, Micro-ATX, and Standard ATX motherboards, including those with back-connect designs for cleaner cable management.

Figure 3.2: Diagram illustrating motherboard compatibility for Mini-ITX, Micro-ATX, and Standard ATX sizes within the case.

1. Remove the side panel by gently pulling it off (toolless design).
2. Install the necessary motherboard standoffs for your motherboard size.
3. ວາງເມນບອດຂອງທ່ານໃສ່ບ່ອນວາງຢ່າງລະມັດລະວັງ ແລະ ຍຶດມັນດ້ວຍສະກູ.
4. ໃຊ້ ample cable routing options for a clean build, especially for back-connect motherboards.

ຮູບທີ 3.3: ພາຍໃນ view showing highlighted areas for back-connect motherboard support and cable management.

3.3 ການຕິດຕັ້ງ GPU

The case supports modern GPU sizes and offers rotatable PCIe slots for vertical GPU mounting without additional accessories.

Figure 3.4: Illustration of the spacious interior supporting GPUs up to 420mm in length.

Figure 3.5: Comparison showing horizontal and vertical GPU mounting options using the rotatable PCIe slots.

1. For horizontal mounting, remove the necessary PCIe slot covers.
2. Insert your GPU into the PCIe slot on the motherboard and secure it with screws.
3. For vertical mounting, rotate the PCIe slot bracket and install your GPU using a compatible riser cable (sold separately).

3.4 ການຕິດຕັ້ງການເກັບຮັກສາ

ກໍລະນີດັ່ງກ່າວສະໜອງໃຫ້ ample storage capacity for both HDDs and SSDs.

Figure 3.6: Diagrams showing locations for HDD and SSD installation within the case.

• Locate the dedicated mounting points for 3.5" HDDs and 2.5" SSDs.
• Secure your storage drives using the provided screws.

3.5 ການຮອງຮັບພັດລົມ ແລະ ໝໍ້ນ້ຳຮ້ອນ

The HS01 PRO comes with 5 pre-installed ARGB fans and offers flexible cooling compatibility.

Figure 3.7: Diagram showing fan and radiator support locations and sizes (Top, Rear, Front, Bottom).

• ເທິງ: Supports 120/240/360mm radiators or 3x 120mm fans.
• ດ້ານຫຼັງ: Supports 2x 120mm fans.
• ດ້ານໜ້າ: Supports 3x 120mm or 2x 140mm fans.
• ລຸ່ມ: Supports 120/240mm radiators or 3x 120mm fans.

The exterior-mounted rear fan design maximizes space for better cooling flexibility.

Figure 3.8: Image showing the repositioned rear fans for optimized cooling potential.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

ເມື່ອອົງປະກອບທັງໝົດຖືກຕິດຕັ້ງ ແລະ ເຊື່ອມຕໍ່ແລ້ວ, ທ່ານສາມາດເລີ່ມຕົ້ນໃຊ້ງານລະບົບຂອງທ່ານໄດ້.

4.1 ການເປີດ/ປິດ

Press the power button located on the front I/O panel to turn your system on or off. A short press typically powers on, while a long press (4-5 seconds) will force a shutdown.

4.2 ການຄວບຄຸມແສງ ARGB

The pre-installed ARGB fans can be customized with 29 lighting modes. Use the LED button on the front I/O panel to cycle through these modes.

For advanced customization and synchronization with other ARGB components, connect the fan ARGB cables to your motherboard's ARGB header and use the motherboard manufacturer's software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).

5. ບໍາລຸງຮັກສາ

ການບຳລຸງຮັກສາເປັນປະຈຳຊ່ວຍຮັບປະກັນປະສິດທິພາບທີ່ດີທີ່ສຸດ ແລະ ອາຍຸການໃຊ້ງານທີ່ຍາວນານຂອງເຄສຄອມພິວເຕີ ແລະ ອົງປະກອບຕ່າງໆຂອງທ່ານ.

5.1 ການທຳຄວາມສະອາດເຄສ

• ພາຍນອກ: ໃຊ້ອ່ອນ, ງamp ຜ້າເຊັດໜ້າຜິວພາຍນອກ. ຫຼີກລ່ຽງນໍ້າຢາທໍາຄວາມສະອາດທີ່ມີສີຂັດ.
• ການກັ່ນຕອງຂີ້ຝຸ່ນ: The HS01 PRO features removable dust filters on the mesh panels. Regularly remove and clean these filters with water and mild soap, or a vacuum cleaner, to maintain optimal airflow. Ensure they are completely dry before re-installing.
• ພາຍໃນ: Use compressed air to blow out dust from inside the case, especially from fans and heatsinks. Perform this outdoors or in a well-ventilated area.

5.2 ການເພີ່ມປະສິດທິພາບການໄຫຼວຽນຂອງອາກາດ

The HS01 PRO is designed for high-airflow with its chimney-style cooling and vertical ventilation.

Figure 5.1: Illustration of the chimney-style cooling, showing airflow from bottom intake to top exhaust.

• Ensure all fans are spinning correctly and are free from obstructions.
• Maintain good cable management to prevent impeding airflow within the case.
• Regularly check and clean dust filters to prevent airflow restriction.

6. ການແກ້ໄຂບັນຫາ

ພາກສ່ວນນີ້ແກ້ໄຂບັນຫາທົ່ວໄປທີ່ທ່ານອາດຈະພົບກັບກໍລະນີ PC ຂອງທ່ານ.

6.1 Fans Not Spinning / ARGB Not Lighting Up

• ກວດສອບການເຊື່ອມຕໍ່: Ensure all fan power cables (PWM) and ARGB cables are securely connected to the motherboard or a fan controller.
• ຊອບແວເມນບອດ: If using motherboard software for ARGB control, ensure the software is installed and configured correctly.
• ປຸ່ມ LED: Try pressing the LED button on the front I/O panel to cycle through modes.
• ການສະຫນອງພະລັງງານ: Verify that your power supply unit (PSU) is providing adequate power to all components.

6.2 ລະບົບບໍ່ເປີດ

• Power Button Connection: Ensure the front panel power switch cable is correctly connected to the motherboard's front panel header.
• ສະວິດ PSU: Verify the power switch on the back of your PSU is in the "ON" position.
• ສາຍໄຟ: Check that the power cable is securely plugged into both the PSU and the wall outlet.
• ການເຊື່ອມຕໍ່ພາຍໃນ: Double-check all internal power connections (24-pin ATX, CPU power, GPU power) to the motherboard and components.

6.3 Poor Airflow / High Temperatures

• ການກັ່ນຕອງຂີ້ຝຸ່ນ: Clean all dust filters regularly.
• ທິດທາງພັດລົມ: Ensure fans are oriented correctly for optimal airflow (intake at bottom/front, exhaust at top/rear).
• ການຄຸ້ມຄອງສາຍໄຟ: Improve internal cable management to reduce airflow obstruction.
• ການເກັບກູ້ສ່ວນປະກອບ: Ensure there is adequate space around components, especially the GPU and CPU cooler, for proper air circulation.

7. ຂໍ້ມູນຈໍາເພາະ

Detailed technical specifications for the MONTECH HS01 PRO PC Case.

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

MONTECH products are manufactured to high quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official MONTECH webເວັບໄຊ.

ການຊ່ວຍເຫຼືອລູກຄ້າ:

If you encounter any issues or have questions regarding your MONTECH HS01 PRO PC case, please contact MONTECH customer support through their official webເວັບໄຊ ຫຼືຂໍ້ມູນການຕິດຕໍ່ທີ່ສະໜອງໃຫ້ຢູ່ໃນການຫຸ້ມຫໍ່ຜະລິດຕະພັນຂອງທ່ານ.

For the latest drivers, software, and product information, please visit the official MONTECH webເວັບໄຊ: www.montechpc.com