ສິນຄ້າເກີນview
The Miaowoof Clear Ice Ball Maker is engineered to produce perfectly transparent, spherical ice, enhancing the aesthetic and taste of your beverages. Its innovative design utilizes stainless steel vacuum insulation to replicate natural freezing, effectively expelling air bubbles and impurities to create crystal-clear ice that melts slowly, preserving the integrity of your drink.
Image: The Miaowoof Clear Ice Ball Maker set, showing the stainless steel cups, silicone molds, and perfectly round clear ice balls in a storage container, alongside a glass of whiskey.
ເນື້ອໃນຊຸດ
Your Miaowoof Clear Ice Ball Maker package includes the following items:
- 2 x 6.5cm Stainless Steel Clear Ice Ball Molds
- 1 x ຄູ່ມືການສອນ
- 1 x Storage Box (holds 6-12 ice balls)
- 1 x Ice Tongs
Image: The complete package contents, featuring the two ice maker units in their retail boxes, the user manual, and a pair of ice tongs.
ການຕັ້ງຄ່າແລະການນໍາໃຊ້ຄັ້ງທໍາອິດ
- ທໍາຄວາມສະອາດອົງປະກອບ: Before first use, wash all parts of the ice maker (stainless steel cups, silicone molds, and storage box) with warm soapy water. Rinse thoroughly and dry.
- Assemble the Mold: Place the silicone mold securely into the stainless steel cup. Ensure it fits snugly.
- ຕື່ມນ້ໍາ: Fill the stainless steel cup with purified or distilled water up to the indicated "MIN" line. Using purified water helps achieve clearer ice.
Image: A detailed diagram illustrating the components of the ice maker, including the silicone mold and stainless steel cup, with measurements and the recommended water fill line.
- ສະຖານທີ່ໃນ Freezer: Place the assembled ice maker upright in your freezer. Ensure it is level to prevent water spillage and ensure even freezing.
ຄໍາແນະນໍາການດໍາເນີນງານ
- ເວລາແຊ່ແຂງ: Allow the ice maker to freeze for approximately 20-24 hours. The exact time may vary depending on your freezer's temperature. For optimal clarity, ensure the ice is fully frozen.
- Removing the Ice Ball: Once frozen, remove the ice maker from the freezer. The unique Y-shaped design of the silicone mold allows the mold to automatically lift by 4mm upon completion of freezing, making removal easier. If the ice is stuck, run warm water over the exterior of the stainless steel cup for a few seconds to loosen it.
- Separate Ice Ball: Gently separate the silicone mold from the stainless steel cup. Then, carefully peel the silicone mold away from the clear ice ball.
- Discard Impurity Ice: A thin layer of cloudy ice (approximately 2cm) containing impurities will form at the bottom of the stainless steel cup. Discard this impurity ice by running it under warm water for a few seconds. This allows for quick preparation for the next freezing cycle.
- ໃຫ້ບໍລິການ: Use the provided ice tongs to place the clear ice ball into your desired drink.
Image: Two individuals holding glasses with clear round ice balls, demonstrating the product's use in beverages.
Image: A close-up of a hand using ice tongs to carefully place a perfectly clear, round ice ball into a glass, ready for serving.
ການບໍາລຸງຮັກສາແລະການດູແລ
- ທໍາຄວາມສະອາດ: After each use, wash the stainless steel cup and silicone mold with warm water and mild dish soap. Rinse thoroughly. The product is dishwasher safe.
- ການອົບແຫ້ງ: Ensure all components are completely dry before storing to prevent water spots or odors.
- ການເກັບຮັກສາ: Store the ice maker in a clean, dry place. Its compact design allows it to be placed upright in refrigerator doors or narrow gaps in the freezer.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Ice is cloudy or has bubbles. | Tap water contains impurities or air. | Use purified or distilled water for best results. Ensure the water level is at the MIN line. |
| Ice ball is difficult to remove. | Ice is over-frozen or mold is stuck. | Ensure the ice is fully frozen (20-24 hours). Run warm water over the exterior of the stainless steel cup for a few seconds to loosen. Do not force removal. |
| ນ້ຳກ້ອນລະລາຍໄວເກີນໄປ. | Ice ball not fully frozen or external temperature is high. | Ensure the ice is completely frozen. The clear ice melts slower than regular ice due to its density. |
| Impurity ice layer is too thick. | Water level too high or excessive impurities. | Ensure water is filled only to the MIN line. Use purified water. |
| Product does not fit in freezer. | Limited freezer space. | The compact design allows it to be placed upright in refrigerator doors or narrow gaps in the freezer. |
ຂໍ້ມູນຈໍາເພາະ
- ໝາຍເລກຕົວແບບ: CICT-0002
- ຍີ່ຫໍ້: ໄມອາວອຟ
- ວັດສະດຸ: Stainless Steel (304 Stainless Steel for vacuum cup) and Silicone
- ສີ: ສີຂາວ
- Ice Ball Diameter: 6.4ຊມ
- ຂະໜາດແພັກເກດ: 26.3 x 17 x 10.6 cm
- ນ້ໍາຫນັກລາຍການ: 0.85 ກິໂລ
- ຄໍາແນະນໍາການດູແລ: ເຄື່ອງລ້າງຈານປອດໄພ
Image: An internal diagram of the stainless steel cup, highlighting the 304 stainless steel material and the vacuum insulation layer that aids in creating clear ice by expelling air bubbles.
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information or product support, please refer to the contact details provided with your purchase or visit the official Miaowoof store on Amazon.
Miaowoof Store: Visit Miaowoof Store
ວິດີໂອຜະລິດຕະພັນຢ່າງເປັນທາງການ
ບໍ່ມີວິດີໂອຜະລິດຕະພັນຢ່າງເປັນທາງການຈາກຜູ້ຂາຍໃນຂະນະນີ້.
