ANZZI Series Frameless Sliding Shower Door

ແນະນຳ

This manual provides detailed instructions for the installation, operation, and maintenance of your ANZZI Series frameless sliding shower door. Please read all instructions carefully before beginning installation to ensure proper function and safety. Professional installation is recommended.

ຮູບ 1: ດ້ານຫນ້າ view of the ANZZI Series Frameless Sliding Shower Door.

ຂໍ້ມູນຄວາມປອດໄພ

• ໃສ່ແວ່ນຕາຄວາມປອດໄພສະເໝີໃນລະຫວ່າງການຕິດຕັ້ງ.
• Handle glass panels with extreme care. Tempered glass can shatter if struck at the edges.
• ໃຫ້ແນ່ໃຈວ່າພື້ນຜິວທີ່ຍຶດຫມັ້ນທັງຫມົດມີໂຄງສ້າງທີ່ດີແລະສາມາດຮອງຮັບນ້ໍາຫນັກຂອງປະຕູອາບນ້ໍາໄດ້.
• Use appropriate tools and follow all local building codes.
• Do not overtighten screws, as this may damage components or glass.
• ຮັກສາເດັກນ້ອຍແລະສັດລ້ຽງຢູ່ຫ່າງຈາກພື້ນທີ່ຕິດຕັ້ງ.

ເນື້ອໃນຊຸດ

Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact ANZZI customer support.

• Tempered Clear Glass Panels (Deco-Glass, 3/8" / 10mm thick)
• Rhino Alloy Hardware (Brushed Gold finish)
• Sliding Rail and Rollers
• Wall Brackets and Support Bar
• Bottom Rail and Guide Block
• ມືຈັບປະຕູ
• ແຜ່ນປະທັບຕາ ແລະ ປະเก็น
• Screws ການຕິດຕັ້ງແລະ Anchors

ຂໍ້ມູນຈໍາເພາະ

Figure 2: Product dimensions and reversible installation feature.

ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

For a visual guide, please refer to the official installation video below. Ensure you have all necessary tools and follow safety precautions.

ຂັ້ນ​ຕອນ​ການ​ຕິດ​ຕັ້ງ​ທີ່​ສໍາ​ຄັນ​:

1. ການ​ວັດ​ແທກ​ແລະ​ການ​ກະ​ກຽມ​: Accurately measure your shower opening (W1 and W2) to ensure proper fit. Verify walls are plumb and level. Mark the installation points for the wall brackets.
2. ຕິດຕັ້ງວົງເລັບ: Drill holes at the marked locations. Secure the wall bracket plates, ensuring they are plumb.
3. ກະກຽມແຖບຮອງຮັບ: Remove wall brackets from the support bar. If necessary, cut the support bar to the required length (W1 minus 1.5 inches).
4. Install Support Bar: Attach the support bar to the installed wall bracket plates. Ensure it is level and secure.
5. Install Bottom Rail and Guide Block: Position the bottom rail and guide block at the center of the shower base. Mark and drill holes. Secure with screws if drilling into acrylic or wood, or use silicone sealant for tile.
6. ຕິດລູກກິ້ງໃສ່ແຜງກະຈົກ: Assemble the rollers, gaskets, washers, and stoppers onto the glass panels. Ensure the side holes point upward.
7. Hang Fixed Glass Panel: Carefully lift and hang the fixed glass panel onto the support bar. Ensure it is properly seated and secured.
8. Hang Sliding Glass Panel: Hang the sliding glass panel onto the support bar. Place a cloth or blanket under the door for protection during this step.
9. Adjust Door Alignment: Slightly push the door to the wall to check if the water sealing strip aligns. If not, loosen the screw of the roller and turn the eccentric block to adjust the door's position. Retighten screws after adjustment.
10. ຕິດຕັ້ງມືຈັບປະຕູ: Attach the door handles to the designated holes on the glass panels using the provided screws, anchors, and gaskets.
11. ໃຊ້ຊິລິໂຄນ sealant: Apply silicone sealant along the bottom rail and vertical edges where the glass meets the wall to ensure a watertight seal.

Figure 3: Reversible installation options for left or right opening.

ຄໍາແນະນໍາການດໍາເນີນງານ

Your ANZZI frameless sliding shower door is designed for smooth and quiet operation. To open or close the door, gently slide the handle along the track. Avoid forcing the door, as this may damage the rollers or track. The door features easy glide rollers for effortless movement.

ບໍາລຸງຮັກສາ

ການທໍາຄວາມສະອາດແລະການບໍາລຸງຮັກສາເປັນປົກກະຕິຈະຮັບປະກັນອາຍຸຍືນແລະຮູບລັກສະນະຂອງປະຕູອາບນ້ໍາຂອງທ່ານ.

• ທໍາຄວາມສະອາດແກ້ວ: The Tsunami Guard coating repels water, soap scum, and mineral staining, making cleaning easier. For best results, wipe down the glass after each use with a soft cloth or squeegee. For deeper cleaning, use a non-abrasive glass cleaner. Avoid harsh chemicals or abrasive pads that could damage the Tsunami Guard coating.
• ການອະນາໄມຮາດແວ: Clean the brushed gold Rhino Alloy hardware with a soft, damp cloth. Do not use abrasive cleaners, steel wool, or cleaners containing ammonia, bleach, or acid, as these can damage the finish.
• ປະທັບຕາແລະ Gaskets: Periodically check the sealing strips and gaskets for wear or damage. Replace them if necessary to maintain a watertight enclosure.
• ການ​ບໍາ​ລຸງ​ຮັກ​ສາ Roller​: Ensure the rollers are free of debris and operate smoothly. If they become stiff, clean them and apply a small amount of silicone-based lubricant if needed.

Figure 4: Deco-Glass with Tsunami Guard coating for easy cleaning.

ການແກ້ໄຂບັນຫາ

If you encounter issues with your shower door, try the following solutions:

• ປະຕູບໍ່ເລື່ອນໄດ້ຢ່າງລຽບງ່າຍ: Check rollers for debris. Clean and lubricate if necessary. Ensure the track is clear.
• ນໍ້າຮົ່ວ: Inspect all silicone sealant lines and sealing strips. Reapply sealant or replace worn seals as needed. Ensure the door is properly aligned and closes completely.
• Door alignment issues: Refer to the installation video and step 9 in the Setup section to adjust the eccentric blocks on the rollers.

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ANZZI offers peace of mind with a ການຮັບປະກັນຕະຫຼອດຊີວິດ on all products, reflecting our commitment to quality and durability. For technical assistance, replacement parts, or warranty claims, please contact ANZZI customer support.

ANZZI Customer Support:

• Webເວັບໄຊ: www.anzzi.com
• ໂທລະສັບ: 1-844-44-ANZZI (for general inquiries)
• ອີເມວ: support@anzzi.com