1. ບົດແນະນຳ
Thank you for choosing the AURIOL Color Display Weather Station. This device provides comprehensive weather information, including indoor and outdoor temperature and humidity, animated weather forecasts, moon phase, and a clock with alarm functions. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your product.
2. ຂໍ້ມູນຄວາມປອດໄພ
- Keep the device away from extreme temperatures, direct sunlight, strong vibrations, and impacts.
- The main unit is designed for indoor use only. The outdoor sensor is splash-proof (IPX4) but should not be submerged in water.
- ຢ່າພະຍາຍາມເປີດຫຼືສ້ອມແປງອຸປະກອນດ້ວຍຕົນເອງ. ອ້າງອີງການບໍລິການທັງໝົດໃຫ້ກັບບຸກຄະລາກອນທີ່ມີຄຸນວຸດທິ.
- ເກັບຮັກສາແບັດເຕີຣີໃຫ້ໄກຈາກເດັກນ້ອຍ. ກຳຈັດແບັດເຕີຣີທີ່ໃຊ້ແລ້ວຕາມລະບຽບຂອງທ້ອງຖິ່ນ.
- ໃຊ້ອະແດບເຕີໄຟຟ້າທີ່ໃຫ້ມາສຳລັບໜ່ວຍຫຼັກເທົ່ານັ້ນ.
3. ເນື້ອໃນຊຸດ
ກະລຸນາກວດເບິ່ງຊຸດສຳລັບລາຍການຕໍ່ໄປນີ້:
- AURIOL Color Display Weather Station (Main Unit)
- Wireless Outdoor Sensor (IPX4 splash-proof)
- Power Adapter for Main Unit
- 4 x Alkaline Batteries (2 x 1.5 V AA for sensor, 2 x 1.5 V AAA for main unit backup)
- ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
4. ຜະລິດຕະພັນເກີນview
ຄຸ້ນເຄີຍກັບອົງປະກອບຕົ້ນຕໍຂອງສະຖານີສະພາບອາກາດຂອງທ່ານ.
ຮູບທີ 4.1: Main unit (right) displaying time, date, indoor/outdoor temperature, humidity, and weather forecast. Wireless outdoor sensor (left) showing its own temperature and humidity.
ຮູບທີ 4.2: Close-up of the main unit's color display, highlighting the animated weather forecast symbols, moon phase indicator, and alarm icons (AL1, AL2).
ຮູບທີ 4.3: ຫລັງ view of the main unit. Visible are the control buttons (SET, UP, DOWN, ALARM, CH) and the battery compartment cover. The unit can be placed on a flat surface or wall-mounted.
5. ຕັ້ງຄ່າ
5.1. ການຕິດຕັ້ງຫມໍ້ໄຟ
- ເຊັນເຊີກາງແຈ້ງ: Open the battery compartment on the back of the wireless outdoor sensor. Insert 2 x 1.5 V AA alkaline batteries, observing the correct polarity (+/-). Close the compartment securely.
- Main Unit (Backup): Open the battery compartment on the back of the main unit (refer to Figure 4.3). Insert 2 x 1.5 V AAA alkaline batteries, observing the correct polarity (+/-). These batteries serve as a backup in case of power outage. Close the compartment.
5.2. Powering On the Main Unit
Connect the provided power adapter to the DC input port on the back of the main unit and then plug it into a wall outlet. The display will light up permanently. The backup batteries will ensure settings are retained if the power adapter is disconnected.
5.3. ການຊິ້ງຂໍ້ມູນເຊັນເຊີ
Once both the sensor and main unit are powered, the main unit will automatically attempt to connect with the outdoor sensor. This process may take a few minutes. The outdoor temperature and humidity readings will appear on the main unit's display once connected. If synchronization fails, press and hold the "CH" button on the main unit to initiate a manual search for the sensor.
5.4. ການຈັດວາງເຊັນເຊີ
Place the outdoor sensor in a shaded, dry location, protected from direct sunlight and rain, but within the 100m wireless range of the main unit. Avoid placing it near large metal objects or electrical appliances that could interfere with the signal. The sensor can be placed on a flat surface or mounted to a wall using the integrated hanging hole.
6. ຄໍາແນະນໍາການດໍາເນີນງານ
6.1. ສະແດງຫຼາຍກວ່າview
The color display is divided into several sections:
- ຊ້າຍເທິງ: Animated Weather Forecast symbols.
- ຂວາເທິງ: Outdoor Temperature and Humidity.
- ກາງຊ້າຍ: ໄລຍະເດືອນ.
- ຂວາກາງ: Indoor Temperature and Humidity.
- ລຸ່ມ: Time, Date, Day of the Week, Alarm Indicators (AL1, AL2).
6.2. Setting Time, Date, and Day of the Week
- Press and hold the "SET" button (refer to Figure 4.3) for 3 seconds to enter time setting mode. The hour digit will flash.
- ໃຊ້ປຸ່ມ "ຂຶ້ນ" ຫຼື "ລົງ" ເພື່ອປັບຄ່າ.
- Press "SET" again to confirm and move to the next setting (minutes, 12/24-hour format, year, month, day, day of week language).
- Repeat steps 2 and 3 until all settings are configured. Press "SET" one last time to exit.
6.3. ການຕັ້ງຄ່າໂມງປຸກ
The weather station features two separate alarms (AL1, AL2).
- Press the "ALARM" button repeatedly to cycle through AL1, AL2, and alarm off.
- To set an alarm, press and hold the "ALARM" button for 3 seconds when the desired alarm (AL1 or AL2) is displayed. The hour digit will flash.
- Use "UP" or "DOWN" to adjust the hour, then press "ALARM" to confirm and move to minutes.
- Adjust minutes with "UP" or "DOWN", then press "ALARM" to confirm and exit.
- When an alarm sounds, press any button (except "SNOOZE") to stop it. Press "SNOOZE" for a temporary pause.
6.4. ການສະແດງອຸນຫະພູມ ແລະ ຄວາມຊຸ່ມຊື່ນ
- ໜ່ວຍຫຼັກສະແດງອຸນຫະພູມ ແລະ ຄວາມຊຸ່ມຊື່ນທັງພາຍໃນ ແລະ ພາຍນອກ.
- Press the "UP" button to switch between Celsius (°C) and Fahrenheit (°F) temperature units.
- The display also shows minimum and maximum recorded temperatures and humidity for both indoor and outdoor. These values reset automatically every 24 hours or can be manually reset by pressing and holding the "DOWN" button.
6.5. ພະຍາກອນອາກາດ
The weather station predicts weather conditions for the next 12-24 hours based on atmospheric pressure changes. The animated symbols (e.g., sunny, partly cloudy, cloudy, rainy, snowy) indicate the forecast. This is a prediction and may not always be 100% accurate.
6.6. ຈໍສະແດງຜົນ Moon Phase
The moon phase icon on the display changes to reflect the current lunar phase.
6.7. Temperature/Freeze Alarm
The device features a temperature alarm and a freeze alarm. When the outdoor temperature drops to a certain threshold (typically near freezing point), a special icon or sound may activate to warn of potential frost conditions. Refer to the specific settings menu (usually accessed via "SET" or "ALARM" button in conjunction with "UP"/"DOWN") to configure these thresholds.
6.8. ຕົວຊີ້ວັດສະຖານະຫມໍ້ໄຟ
Battery icons on the display will indicate the battery status for both the main unit (backup) and the outdoor sensor. Replace batteries promptly when the low battery indicator appears to ensure continuous operation.
7. ບໍາລຸງຮັກສາ
- ທໍາຄວາມສະອາດ: ເຊັດອຸປະກອນດ້ວຍຄວາມອ່ອນ, ງamp ຜ້າ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
- ການປ່ຽນແບັດເຕີຣີ: Replace batteries in both the main unit (backup) and the outdoor sensor when the low battery indicator appears. Ensure correct polarity.
- ການເກັບຮັກສາ: ຖ້າເກັບຮັກສາອຸປະກອນໄວ້ເປັນເວລາດົນ, ເອົາແບັດເຕີລີທັງໝົດອອກເພື່ອປ້ອງກັນການຮົ່ວໄຫຼ.
8. ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ບໍ່ມີການສະແດງຢູ່ໃນຫນ່ວຍງານຕົ້ນຕໍ. | Power adapter not connected or faulty; backup batteries depleted or incorrectly inserted. | Ensure power adapter is securely connected. Check and replace backup batteries if necessary, verifying polarity. |
| ການອ່ານພາຍນອກບໍ່ສະແດງ ຫຼືບໍ່ຖືກຕ້ອງ. | Sensor out of range; sensor batteries depleted; interference; sensor not synchronized. | Move sensor closer to the main unit. Replace sensor batteries. Relocate sensor away from interference sources. Press and hold "CH" button on main unit to re-synchronize. |
| ການພະຍາກອນອາກາດເບິ່ງຄືວ່າບໍ່ຖືກຕ້ອງ. | Forecast is a prediction based on atmospheric pressure and may not always match actual conditions. | This is normal. The forecast is an estimation. Ensure the unit has been operating for at least 24 hours for initial pressure calibration. |
| ໂມງປຸກບໍ່ມີສຽງ. | ປຸກບໍ່ໄດ້ເປີດໃຊ້ງານ ຫຼືຕັ້ງບໍ່ຖືກຕ້ອງ. | Verify that the alarm (AL1 or AL2) is enabled and the time is set correctly. |
9. ຂໍ້ມູນຈໍາເພາະ
- ຕົວແບບ: 456364
- ຍີ່ຫໍ້: Auriol
- ເຕັກໂນໂລຍີການເຊື່ອມຕໍ່: 433 MHz, 868 MHz (Wireless)
- ລະດັບເຊັນເຊີກາງແຈ້ງ: ສູງເຖິງ 100 ແມັດ (ພື້ນທີ່ເປີດ)
- ແຫຼ່ງພະລັງງານ (ໜ່ວຍຫຼັກ): Power Adapter (included), 2 x 1.5 V AAA Alkaline Batteries (backup, included)
- ແຫຼ່ງພະລັງງານ (ເຊັນເຊີພາຍນອກ): 2 x 1.5 V AA Alkaline Batteries (included)
- ຄຸນນະສົມບັດພິເສດ: Color Display, Min/Max Temperature/Humidity, Animated Weather Forecast, Moon Phase, Dual Alarms, Temperature/Freeze Alarm
- ວັດສະດຸ: ພາດສະຕິກ
- ສີ: ດຳ
- Outdoor Sensor Protection: IPX4 (ກັນນໍ້າກະແຈກກະຈາຍ)
- ການນໍາໃຊ້ທີ່ແນະນໍາ: ບ້ານ
- ການນໍາໃຊ້ສະເພາະ: ການຕິດຕາມອຸນຫະພູມ
10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
This AURIOL product comes with a standard manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included in your package or contact your retailer. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact AURIOL customer service through their official webເວັບໄຊ ຫຼືຂໍ້ມູນການຕິດຕໍ່ທີ່ສະໜອງໃຫ້ໃນເອກະສານການຊື້ຂອງທ່ານ.
