MYPIN Portable Cordless Pressure Washer CE0413 User Manual

1. ບົດແນະນຳ

Thank you for choosing the MYPIN Portable Cordless Pressure Washer, Model CE0413. This device is designed for efficient and convenient cleaning of various surfaces, including vehicles, floors, walls, and fences. Its cordless design and adjustable pressure settings provide versatility for different cleaning tasks. Please read this manual thoroughly before operation to ensure safe and effective use.

2. ຄໍາແນະນໍາຄວາມປອດໄພ

• Always wear appropriate safety gear, including eye protection, when operating the pressure washer.
• Keep hands, face, and body parts away from the spray nozzle during operation. The high-pressure water stream can cause injury.
• Do not direct the water stream at people, pets, or electrical equipment.
• Ensure the battery is fully charged before use and properly inserted into the device.
• Disconnect the battery when the pressure washer is not in use or during maintenance.
• Use only clean water with the pressure washer. Do not use corrosive liquids or solvents.
• ຮັກສາອຸປະກອນໃຫ້ໄກຈາກເດັກນ້ອຍ.
• Inspect the hose, nozzle, and connections for damage before each use. Do not operate if any components are damaged.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ທີ່​ລະ​ບຸ​ໄວ້​ຂ້າງ​ລຸ່ມ​ນີ້​ແມ່ນ​ລວມ​ຢູ່​ໃນ​ຊຸດ​ຂອງ​ທ່ານ​:

• 1 x Cordless High-Pressure Washer
• 2 x Lithium-Ion Batteries (3.0Ah)
• 1 x Charging Plug
• 1 x Suitcase for storage
• 1 x 5-meter (196-inch) PVC Hose
• 1 x 6-in-1 Nozzle
• 1 x Foam Bottle
• 1 x Towel
• 1 x Bottle Connector
• 1 x ຕົວເຊື່ອມຕໍ່ດ່ວນ
• 1 x ເຄື່ອງກອງນໍ້າ
• 1 x ຄູ່ມືຜູ້ໃຊ້

ຮູບພາບ: ຫຼາຍກວ່າview of all included accessories and the pressure washer unit.

4. ຄໍາແນະນໍາການຕິດຕັ້ງ

ປະຕິບັດຕາມຂັ້ນຕອນເຫຼົ່ານີ້ເພື່ອຕັ້ງຄ່າເຄື່ອງລ້າງດ້ວຍຄວາມດັນຂອງທ່ານສຳລັບການໃຊ້ຄັ້ງທຳອິດ:

1. ສາກແບັດເຕີລີ: Connect the charging plug to the battery and a power outlet. The indicator light will be red during charging and turn green when fully charged.
2. Connect the Water Filter: Insert the water filter into one end of the PVC hose. This filter prevents impurities from entering the pump.
3. Install Quick Connector: Attach the quick connector to the other end of the PVC hose.
4. Attach Hose to Sprayer Gun: Connect the quick connector on the hose to the inlet on the sprayer gun.
5. ຕິດຕັ້ງ Nozzle: Press and twist the desired 6-in-1 nozzle onto the sprayer gun.
6. ໃສ່ແບັດເຕີລີ: Slide a fully charged battery into the battery slot on the pressure washer handle until it clicks into place.
7. ກະກຽມແຫຼ່ງນໍ້າ: Place the end of the PVC hose with the water filter into a bucket of water or a water pool. Ensure the filter is fully submerged.

Image: Visual guide for connecting the water filter, hose, quick connector, nozzle, and battery.

Image: Illustration of the battery charger with red light indicating charging and green light indicating full charge.

Image: Demonstrates using a water bucket or a water pool as a source for the pressure washer.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

Once assembled and connected to a water source, you can begin operation:

1. ເປີດ: Press the power button on the handle. The LCD display will illuminate.
2. Adjust Pressure Mode: Use the touch screen on the LCD display to adjust the pressure mode from 1 to 10. Press '+' to increase pressure and '-' to decrease pressure. The display also shows battery percentage.
3. Select Nozzle Spray Pattern: Rotate the head of the 6-in-1 nozzle to select the desired spray pattern: 0° (direct stream for stubborn stains), 15°, 25°, 40° (wider spray for general cleaning), Upward (for hard-to-reach areas like undercarriages), or Shower (for gentle rinsing or watering plants).
4. ເລີ່ມທໍາຄວາມສະອາດ: Aim the nozzle at the surface to be cleaned and press the trigger to start the water flow. Release the trigger to stop.
5. Using the Foam Bottle: For foam cleaning, fill the foam bottle with detergent and attach it to the sprayer gun. The pressure washer will mix the detergent with water to create foam.

Image: The LCD display allows for easy adjustment of pressure modes (1-10) and shows battery percentage.

Image: The 6-in-1 nozzle offers various spray modes including 0°, 15°, 25°, 40°, upward, and shower for diverse cleaning needs.

Image: The foam bottle can be used to apply detergent for deeper cleaning, drawing water from a bucket or pool.

6. ບໍາລຸງຮັກສາ

ການບຳລຸງຮັກສາເປັນປະຈຳຮັບປະກັນປະສິດທິພາບທີ່ດີທີ່ສຸດ ແລະ ຍືດອາຍຸການໃຊ້ງານຂອງເຄື່ອງລ້າງດ້ວຍຄວາມດັນຂອງທ່ານໄດ້:

• ເຄື່ອງກອງນໍ້າສະອາດ: Regularly remove and clean the water filter to prevent clogging and protect the pump from impurities.
• ລ້າງ​ອອກ​ຫຼັງ​ຈາກ​ການ​ນໍາ​ໃຊ້​: After using detergents or chemicals, run clean water through the pressure washer for a few minutes to flush out any residue.
• ເກັບຮັກສາຢ່າງຖືກຕ້ອງ: Store the pressure washer and its accessories in the provided suitcase in a dry, cool place, away from direct sunlight and freezing temperatures.
• ການດູແລຫມໍ້ໄຟ: Store batteries in a cool, dry place. Do not expose them to extreme temperatures. Charge them periodically if not used for extended periods.

Image: The water filter effectively removes leaves, sediment, and other impurities to protect the pressure washer.

7. ການແກ້ໄຂບັນຫາ

ຖ້າ​ຫາກ​ທ່ານ​ພົບ​ບັນ​ຫາ​, ເບິ່ງ​ບັນ​ຫາ​ທົ່ວ​ໄປ​ດັ່ງ​ຕໍ່​ໄປ​ນີ້​ແລະ​ການ​ແກ້​ໄຂ​:

• ບໍ່ມີນ້ໍາໄຫຼ:
  • Ensure the water filter is submerged and not clogged.
  • Check that all hose connections are secure.
  • Verify the battery is charged and properly inserted.
• ຄວາມກົດດັນຕໍ່າ:
  • Check the selected pressure mode on the LCD display; increase if necessary.
  • Ensure the water filter is clean and not restricting water flow.
  • Verify the water source has sufficient volume.
• ອຸປະກອນບໍ່ເປີດ:
  • ຢືນຢັນວ່າແບັດເຕີຣີຖືກສາກເຕັມແລ້ວ.
  • Ensure the battery is correctly inserted and locked into place.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, technical support, or service inquiries, please contact the manufacturer or refer to the product's original purchase documentation. Specific warranty terms and conditions may vary.