TOTAL TIDLI20558 Compact Brushless Cordless Impact Drill User Manual

1. ຜະລິດຕະພັນເກີນview

The TOTAL TIDLI20558 is a compact brushless cordless impact drill designed for various drilling and fastening applications. It features a powerful 20V motor, delivering up to 55Nm of torque, making it suitable for both professional and DIY tasks. This drill combines durability with an ergonomic design for comfortable and efficient operation.

Figure 1: TOTAL TIDLI20558 Compact Brushless Cordless Impact Drill. This image displays the drill unit with a battery attached, showcasing its compact design and main body.

2. ຄໍາແນະນໍາຄວາມປອດໄພ

ສັງເກດເບິ່ງຄວາມລະມັດລະວັງດ້ານຄວາມປອດໄພຂັ້ນພື້ນຖານສະເໝີເມື່ອໃຊ້ເຄື່ອງມືໄຟຟ້າເພື່ອຫຼຸດຜ່ອນຄວາມສ່ຽງຕໍ່ການເກີດອັກຄີໄພ, ໄຟຟ້າຊອດ ແລະ ການບາດເຈັບສ່ວນບຸກຄົນ.

• ຄວາມປອດໄພໃນພື້ນທີ່ເຮັດວຽກ: ຮັກສາພື້ນທີ່ບ່ອນເຮັດວຽກຂອງເຈົ້າໃຫ້ສະອາດ ແລະ ມີແສງສະຫວ່າງດີ. ພື້ນທີ່ວຸ້ນວາຍ ຫຼືບ່ອນມືດພາໃຫ້ເກີດອຸປະຕິເຫດ. ຫ້າມໃຊ້ເຄື່ອງມືໄຟຟ້າໃນບັນຍາກາດທີ່ລະເບີດ, ເຊັ່ນໃນທີ່ປະທັບຂອງຂອງແຫຼວ, ອາຍແກັສ, ຫຼືຝຸ່ນ.
• ຄວາມປອດໄພທາງໄຟຟ້າ: ຫຼີກລ່ຽງການສຳຜັດກັບຮ່າງກາຍກັບພື້ນຜິວທີ່ມີດິນ ຫຼື ມີສາຍດິນ ເຊັ່ນ: ທໍ່, ໝໍ້ນ້ຳຄວາມຮ້ອນ, ເຕົາແກັສ ແລະ ຕູ້ເຢັນ. ຢ່າໃຫ້ເຄື່ອງມືໄຟຟ້າຖືກຝົນ ຫຼື ສະພາບປຽກ.
• ຄວາມປອດໄພສ່ວນຕົວ: ໃສ່ອຸປະກອນປ້ອງກັນດວງຕາສະເໝີ. ໃຊ້ອຸປະກອນປ້ອງກັນການໄດ້ຍິນເມື່ອໃຊ້ງານເຄື່ອງເຈາະເປັນເວລາດົນ. ແຕ່ງຕົວໃຫ້ເໝາະສົມ; ຫຼີກລ່ຽງເຄື່ອງນຸ່ງທີ່ຫຼວມ ຫຼື ເຄື່ອງປະດັບ. ມັດຜົມຍາວໃຫ້ແໜ້ນ.
• ການ​ນໍາ​ໃຊ້​ແລະ​ການ​ດູ​ແລ​ເຄື່ອງ​ມື​: ຢ່າບັງຄັບເຄື່ອງມືພະລັງງານ. ໃຊ້ເຄື່ອງມືພະລັງງານທີ່ຖືກຕ້ອງສໍາລັບຄໍາຮ້ອງສະຫມັກຂອງທ່ານ. ຖອດຊຸດແບັດເຕີລີ່ອອກຈາກເຄື່ອງມືໄຟຟ້າກ່ອນທີ່ຈະເຮັດການປັບປ່ຽນ, ປ່ຽນອຸປະກອນເສີມ, ຫຼືເກັບຮັກສາເຄື່ອງມືພະລັງງານ.
• ຄວາມປອດໄພຊຸດຫມໍ້ໄຟ: Recharge only with the charger specified by the manufacturer. Do not use battery packs with any other power tools. Do not incinerate the battery pack even if it is severely damaged.

3. ສ່ວນປະກອບ

Familiarize yourself with the main components of your TOTAL TIDLI20558 impact drill:

1. ຄັກ: Holds drill bits and other accessories.
2. ວົງການປັບແຮງບິດ: Allows selection of desired torque setting for screwdriving.
3. ຕົວເລືອກໂModeດ: Switches between drilling, impact drilling, and screwdriving modes.
4. ສະວິດຕົວເລືອກຄວາມໄວ: Controls the high/low speed range.
5. Trigger Switch: ເປີດໃຊ້ງານສະວ່ານ ແລະ ຄວບຄຸມຄວາມໄວທີ່ປ່ຽນແປງໄດ້.
6. Forward/Reverse Selector: ປ່ຽນທິດທາງການໝູນຂອງ chuck.
7. ໄຟ LED ເຮັດ​ວຽກ​: ເຮັດໃຫ້ມີແສງໃນພື້ນທີ່ເຮັດວຽກ.
8. ຊຸດຫມໍ້ໄຟ: Provides power to the drill.
9. ປຸ່ມປ່ອຍແບັດເຕີຣີ: ໃຊ້ເພື່ອຖອດຊຸດແບັດເຕີຣີອອກ.
10. ມືຈັບ: Ergonomic grip for user comfort.

4. ຕັ້ງຄ່າ

4.1. ການຕິດຕັ້ງ ແລະສາກແບັດເຕີຣີ

• ການສາກໄຟ: Connect the charger to a power outlet. Slide the battery pack onto the charger until it clicks into place. The indicator light on the charger will show the charging status. Ensure the battery is fully charged before first use.
• ການຕິດຕັ້ງ: Align the battery pack with the base of the drill handle. Slide the battery pack into the drill until it clicks securely into place. Ensure it is firmly seated before operation.
• ການໂຍກຍ້າຍ: Press the battery release button located on the battery pack and slide the battery out of the drill handle.

4.2. ການຕິດຕັ້ງ ແລະຖອນເຈາະ/ອຸປະກອນເສີມ

• ການຕິດຕັ້ງ: Rotate the chuck counter-clockwise to open the jaws. Insert the drill bit or accessory fully into the chuck. Rotate the chuck clockwise to tighten the jaws securely around the bit. Ensure the bit is centered and firmly held.
• ການໂຍກຍ້າຍ: Rotate the chuck counter-clockwise to loosen the jaws and remove the drill bit or accessory.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

5.1. ການເປີດ/ປິດ ແລະການຄວບຄຸມຄວາມໄວ

• ເພື່ອເປີດເຄື່ອງ: ກົດສະວິດໄກປືນ. ຄວາມໄວຂອງສະວ່ານຈະປ່ຽນແປງໄດ້ຂຶ້ນກັບວ່າກົດໄກປືນໄດ້ໄກປານໃດ.
• ປິດເຄື່ອງ: ປ່ອຍປຸ່ມກະຕຸ້ນ.
• ຕົວເລືອກຄວາມໄວ: Use the speed selector switch (typically on top of the drill) to choose between low speed (for high torque applications like screwdriving) and high speed (for drilling).

5.2. Forward/Reverse Rotation

The forward/reverse selector switch is located above the trigger. Push it to the left for forward rotation (drilling/tightening) and to the right for reverse rotation (removing screws/backing out bits). Ensure the drill is completely stopped before changing direction.

5.3. Mode Selection (Drilling, Impact, Screwdriving)

Rotate the mode selector ring to choose the appropriate setting:

• ຮູບແບບການເຈາະ: ສໍາລັບການເຈາະເຂົ້າໄປໃນໄມ້, ໂລຫະ, ແລະພາດສະຕິກ.
• ຮູບແບບການເຈາະຜົນກະທົບ: For drilling into masonry and concrete (if applicable to this model's capabilities).
• ໂຫມດໄຂວ່: Use with the torque adjustment ring to prevent over-tightening screws.

5.4. ການປັບແຮງບິດ

In screwdriving mode, rotate the torque adjustment ring to select the desired torque level. Lower numbers indicate lower torque for smaller screws or softer materials, while higher numbers provide more torque for larger screws or harder materials. The drill will stop driving when the selected torque is reached.

6. ບໍາລຸງຮັກສາ

6.1. ທໍາຄວາມສະອາດ

• Regularly clean the ventilation openings of the drill to prevent overheating.
• ໃຊ້ອ່ອນ, ງamp ຜ້າເຊັດອອກດ້ານນອກຂອງເຄື່ອງມື. ຢ່າໃຊ້ສານເຄມີທີ່ຮຸນແຮງຫຼືເຄື່ອງເຮັດຄວາມສະອາດຂັດ.
• Keep the chuck jaws free from dust and debris to ensure proper bit gripping.

6.2. ການເກັບຮັກສາ

• Store the drill and battery packs in a cool, dry place, away from direct sunlight and moisture.
• Ensure the battery pack is partially charged (around 50%) before long-term storage to prolong its lifespan.
• ເກັບຮັກສາໄວ້ໃຫ້ໄກຈາກເດັກນ້ອຍ.

6.3. ການດູແລຫມໍ້ໄຟ

• Do not expose battery packs to extreme temperatures or direct heat.
• Avoid fully discharging the battery pack frequently, as this can reduce its overall lifespan.
• If the battery pack is not used for an extended period, recharge it every 3-6 months.

7. ການແກ້ໄຂບັນຫາ

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact TOTAL customer service. Keep your purchase receipt as proof of purchase for warranty claims.

ໝາຍເຫດ: ເງື່ອນໄຂການຮັບປະກັນສະເພາະອາດຈະແຕກຕ່າງກັນໄປຕາມພາກພື້ນ.