Invacare Essential SX3 Manual Wheelchair User Manual

ແນະນຳ

This manual provides essential instructions for the safe and effective use, assembly, maintenance, and troubleshooting of your Invacare Essential SX3 Manual Wheelchair. Please read this manual thoroughly before using the wheelchair to ensure proper operation and to prevent injury.

ສິນຄ້າເກີນview

The Invacare Essential SX3 Manual Wheelchair is designed for adults requiring mobility assistance. It features a lightweight, foldable frame, comfortable padded armrests, and adjustable footrests for enhanced user experience.

ຮູບທີ 1: Invacare Essential SX3 Manual Wheelchair, front-side view.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• Flip-Back Desk Length Armrests: Padded armrests designed for easy access to desks and tables, and for simplified transfers.
• ການອອກແບບນ້ຳໜັກເບົາ ແລະພັບໄດ້: Weighs approximately 38 lbs and folds to 12.3 inches wide for transport and storage.
• Adjustable Seat Depth: Standard 16-inch depth, extendable by 2 inches with an included kit.
• Durable Vinyl Upholstery: Easy to clean and resistant to wear.
• Swing-Away and Adjustable Footrests: Removable and height-adjustable for user comfort and easier transfers.
• Smooth-Rolling Wheels: 8-inch PVC front wheels and 24-inch rear mag PU tires with built-in wheel locks.

ອົງປະກອບ

Familiarize yourself with the main components of your wheelchair:

• ກອບ: Powder-coated steel frame.
• ບ່ອນນັ່ງ ແລະພຶງ: Vinyl upholstery.
• ບ່ອນວາງແຂນ: Padded, flip-back, desk-length.
• Footrests/Legrests: Swing-away, height-adjustable.
• Casters ດ້ານຫນ້າ: 8-inch PVC wheels.
• ລໍ້ດ້ານຫລັງ: 24-inch mag PU tires with push-rims.
• ລັອກລໍ້: For securing the wheelchair.
• Push Handles: For attendant propulsion.

ຮູບທີ 2: ດ້ານໜ້າ view of the wheelchair, showing footrests and front casters.

ການຕິດຕັ້ງແລະການປະກອບ

The Invacare Essential SX3 Wheelchair arrives fully assembled. Follow these steps for initial preparation:

1. Unfolding the Wheelchair:
   • ວາງລົດເຂັນທີ່ພັບໄວ້ເທິງພື້ນຜິວທີ່ຮາບພຽງ ແລະ ໝັ້ນຄົງ.
   • Grasp the push handles and gently pull them apart until the wheelchair frame begins to open.
   • Push down firmly on both sides of the seat rails until the seat is fully flat and locked into position. Ensure there is an audible click.
2. Attaching/Adjusting Footrests:
   • Align the footrest hangers with the receiver brackets on the front of the wheelchair frame.
   • Swing the footrests inward until they lock into place.
   • To adjust the height, press the release button on the legrest tube and slide the footplate up or down to the desired position. Release the button to lock.
   • To remove, swing the footrests outward and lift them off the receiver brackets.
3. Adjusting Seat Depth (Optional):
   • The wheelchair includes a kit to extend the seat depth by 2 inches. Refer to the separate instructions provided with the extension kit for detailed installation.
4. Inspecting Wheelchair: Before first use, ensure all components are securely attached, wheels roll freely, and wheel locks engage properly.

ຮູບທີ 3: Flip-back armrests allow seamless access to desks and tables.

ຄໍາແນະນໍາການດໍາເນີນງານ

Self-Propulsion:

• Grasp the push-rims on the rear wheels.
• Push forward on the rims to move forward, and pull back to slow down or reverse.
• To turn, apply more force to one push-rim than the other.

Attendant Propulsion:

• An attendant can push the wheelchair using the ergonomic non-slip hand grips on the back of the chair.
• Use the integrated steel step tube to assist in lifting the front casters over small obstacles like curbs or bumps.

ຮູບທີ 4: Attendant pushing the wheelchair, demonstrating the use of the integrated step tube.

Engaging Wheel Locks:

• Always engage both wheel locks when transferring in or out of the wheelchair, or when stationary.
• Push the lever on each wheel lock forward until it clicks into place, securing the rear wheels.
• To disengage, pull the lever back.

ຮູບທີ 5: Close-up of the secure locking wheel mechanism.

Folding the Wheelchair:

• Ensure footrests are swung away or removed.
• Grasp the center of the seat upholstery and lift upwards. The frame will begin to collapse inward.
• Continue lifting until the wheelchair is fully folded.

ຮູບທີ 6: The wheelchair folds compactly for storage and transport.

ບໍາລຸງຮັກສາ

ທໍາຄວາມສະອາດ:

• Wipe down the vinyl upholstery and frame with a damp ຜ້າແລະສະບູອ່ອນໆ.
• ຫຼີກລ້ຽງການເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍທີ່ອາດຈະທໍາລາຍການສໍາເລັດຮູບ.
• ແຫ້ງຢ່າງລະອຽດຫຼັງຈາກທໍາຄວາມສະອາດ.

ການກວດກາ:

• Regularly check all nuts, bolts, and fasteners for tightness.
• Inspect tires for wear and proper inflation (if applicable for rear tires).
• Ensure wheel locks engage and disengage smoothly and securely.
• Check armrests and footrests for secure attachment and proper function.

ການແກ້ໄຂບັນຫາ

ຂໍ້ມູນຈໍາເພາະ

• ໝາຍເລກຕົວແບບ: ISX366DASA
• ຂະໜາດຜະລິດຕະພັນ (ເປີດ): 31.88 x 24.25 x 34 ນິ້ວ
• ນ້ຳໜັກ: 38 ປອນ
• ກວ້າງຂອງບ່ອນນັ່ງ: 16 ນິ້ວ
• ຄວາມເລິກບ່ອນນັ່ງ: 16 inches (extendable to 18 inches)
• ລໍ້ໜ້າ: 8-inch PVC
• ລໍ້ດ້ານຫລັງ: 24-inch Mag PU tires
• ຜູ້ຜະລິດ: Invacare

ຮູບທີ 7: Key dimensions and maximum weight capacity of the wheelchair.

ຂໍ້ມູນຄວາມປອດໄພ

• Always engage wheel locks before transferring in or out of the wheelchair.
• Do not attempt to operate the wheelchair on steep inclines or declines without assistance.
• ໃຫ້ແນ່ໃຈວ່າທຸກພາກສ່ວນຖືກມັດຢ່າງປອດໄພກ່ອນທີ່ຈະໃຊ້ແຕ່ລະຄັ້ງ.
• ບໍ່ເກີນຄວາມອາດສາມາດນ້ໍາຫນັກສູງສຸດຂອງ 265 lbs.
• Avoid sudden movements or changes in direction that could cause instability.
• Regularly inspect the wheelchair for any signs of wear or damage. Do not use if damaged.

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and customer support, please contact Invacare directly. Refer to the product packaging or the official Invacare webເວັບໄຊທ໌ສຳລັບເງື່ອນໄຂການຮັບປະກັນສະເພາະ ແລະ ລາຍລະອຽດການຕິດຕໍ່.

ຜູ້ຜະລິດ: Invacare

ນະໂຍບາຍການສົ່ງຄືນ: 30-day return policy (as per Amazon listing at time of purchase).