1. ບົດແນະນຳ
Thank you for choosing the IBO OHI 32-60/180 3-Stage Heating Circulation Pump. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new pump. Please read this manual thoroughly before installation and use, and keep it for future reference.
2. ຄໍາແນະນໍາຄວາມປອດໄພ
ສຳຄັນ: Failure to follow these safety instructions may result in electric shock, fire, serious injury, or property damage.
- ໃຫ້ແນ່ໃຈວ່າການສະຫນອງພະລັງງານກົງກັບ voltage specified on the pump's rating plate.
- Always disconnect the power supply before performing any installation, maintenance, or repair work.
- Installation and electrical connections must be performed by a qualified electrician in accordance with local regulations.
- Do not operate the pump if it is damaged or if the power cable is frayed.
- ປົກປ້ອງປັ໊ມຈາກອຸນຫະພູມເຢັນ.
- This pump is designed for circulating hot water in heating systems. Do not use it for other liquids or purposes.
3. ຜະລິດຕະພັນເກີນview
The IBO OHI 32-60/180 is a robust 3-stage circulation pump designed for heating systems. Its construction and high-quality materials ensure quiet operation and reliable performance. The pump features a ceramic rotor shaft for durability.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ:
- 3-speed motor for adaptable operation.
- Quiet performance due to quality materials.
- Ceramic rotor shaft.
- Nominal pressure: 10 bar.
- Mounting height: 180 mm.
- Delivery height: 6 m.
Figure 1: IBO OHI 32-60/180 Circulation Pump. This image shows the main body of the pump, typically orange in color, with connection points for the heating system pipes.
4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Before installation, ensure the system is depressurized and drained. The pump should be installed in a horizontal position with the motor shaft horizontal.
- ກະກຽມສະຖານທີ່ຕິດຕັ້ງ: Ensure there is sufficient space around the pump for maintenance and ventilation.
- ການຕິດຕັ້ງ: Securely mount the pump to the piping system. The mounting height is 180 mm.
- ເຊື່ອມຕໍ່ທໍ່: Connect the heating system pipes to the pump. The threaded connection diameter is 2" / 1 1/2". Ensure all connections are sealed properly using the provided gaskets.
- ການເຊື່ອມຕໍ່ໄຟຟ້າ: A qualified electrician must perform the electrical wiring. Connect the pump to a suitable power supply (230V, 50Hz) according to local electrical codes. Ensure proper grounding.
- Fill and Vent System: After installation, fill the heating system with water and thoroughly vent all air from the system, including the pump.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
The IBO OHI 32-60/180 pump features a 3-speed motor, allowing you to adjust its performance to your heating system's requirements.
- ເປີດ: Once the pump is installed and the system is filled and vented, switch on the main power supply to the pump.
- ເລືອກການຕັ້ງຄ່າຄວາມໄວ: The pump has a selector switch for three different speed levels. Choose the appropriate level based on your system's demand:
- ລະດັບ 1: 46W power consumption, 22 l/min flow rate, 3 m delivery height. Suitable for lower heating demands.
- ລະດັບ 2: 63W power consumption, 38 l/min flow rate, 5 m delivery height. A balanced setting for typical heating needs.
- ລະດັບ 3: 93W power consumption, 55 l/min flow rate, 6 m delivery height. For maximum heating performance.
- ການຕິດຕາມ: Periodically check the system pressure and pump operation to ensure optimal performance.
6. ບໍາລຸງຮັກສາ
Regular maintenance ensures the longevity and efficient operation of your circulation pump.
- ການກວດກາປະຈຳປີ: It is recommended to have the pump inspected annually by a qualified technician.
- ທໍາຄວາມສະອາດ: ຮັກສາພາຍນອກຂອງປັ໊ມສະອາດແລະບໍ່ມີຝຸ່ນແລະສິ່ງເສດເຫຼືອ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດ.
- ກວດສອບການຮົ່ວໄຫລ: Regularly inspect all connections for any signs of water leakage. Tighten connections if necessary.
- ຄຸນະພາບນ້ໍາຂອງລະບົບ: Ensure the heating system water is clean and treated to prevent corrosion and scale buildup, which can affect pump performance.
- ລະດູໜາວ: If the heating system is shut down for an extended period during freezing temperatures, ensure the pump and system are properly drained to prevent damage from freezing.
7. ການແກ້ໄຂບັນຫາ
ພາກນີ້ສະຫນອງການແກ້ໄຂບັນຫາທົ່ວໄປທີ່ທ່ານອາດຈະພົບ. ສໍາລັບບັນຫາທີ່ບໍ່ໄດ້ລະບຸໄວ້ໃນທີ່ນີ້, ໃຫ້ຕິດຕໍ່ພະນັກງານບໍລິການທີ່ມີຄຸນວຸດທິ.
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ປັ໊ມບໍ່ເລີ່ມຕົ້ນ | No power supply; Motor seized; Air in pump. | Check power connection and circuit breaker; Try to free the rotor (consult technician); Vent the pump and system. |
| ປັມມີສຽງດັງ | Air in system; Cavitation; Foreign objects in pump. | Vent the system thoroughly; Check system pressure; Disconnect power and inspect pump (consult technician). |
| Insufficient flow/pressure | Incorrect speed setting; Air in system; Blockage in pipes/pump; Low system pressure. | Adjust speed setting; Vent the system; Check for blockages; Increase system pressure. |
| ການຮົ່ວໄຫຼໃນການເຊື່ອມຕໍ່ | Loose connections; Damaged gaskets. | Tighten connections; Replace gaskets. |
8. ຂໍ້ກໍານົດດ້ານວິຊາການ
| ພາລາມິເຕີ | ມູນຄ່າ |
|---|---|
| ໝາຍເລກຕົວແບບ | OHI 32-60/180 |
| ຜູ້ຜະລິດ | DAMBAT JASTRZĘBSKI S.K.A. |
| Threaded Connection Diameter | 2" / 1 1/2" |
| ຄວາມກົດດັນນາມ | 10 ບາ |
| ຄວາມສູງຂອງການຕິດຕັ້ງ | 180 ມມ |
| ຄວາມສູງການຈັດສົ່ງສູງສຸດ | 6 ມ |
| ອັດຕາການໄຫຼສູງສຸດ | 55 ລິດຕໍ່ນາທີ |
| Power Consumption (Level 1) | 46W |
| Power Consumption (Level 2) | 63W |
| Power Consumption (Level 3) | 93W |
| ວັດສະດຸ | ທາດເຫຼັກສຽງໂຫວດທັງຫມົດ |
| ແຫຼ່ງພະລັງງານ | ສາຍໄຟຟ້າ |
| ຂະໜາດສິນຄ້າ | 18 x 20 x 21 cm |
| ສ່ວນປະກອບລວມ | Pump with seals |
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
This IBO product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration.
For technical support, spare parts, or warranty claims, please contact your retailer or the manufacturer's authorized service center. Keep your proof of purchase handy when contacting support.
ຜູ້ຜະລິດ: DAMBAT JASTRZĘBSKI S.K.A.
