CREWORKS 25cm 350W Electric Pottery Wheel User Manual

1. ບົດແນະນຳ

Thank you for choosing the CREWORKS 25cm 350W Electric Pottery Wheel. This manual provides essential information for the safe and efficient operation of your new pottery wheel. Please read all instructions carefully before use and retain this manual for future reference.

This electric pottery wheel features a 25 cm reversible turntable and a powerful 350W motor, suitable for various pottery projects and skill levels. Its design emphasizes durability, safety, and ease of use, making it an ideal tool for both beginners and experienced potters.

2. ຄໍາແນະນໍາຄວາມປອດໄພທີ່ສໍາຄັນ

ເພື່ອຫຼຸດຜ່ອນຄວາມສ່ຽງຕໍ່ການເກີດອັກຄີໄພ, ໄຟຟ້າຊ໊ອກ, ຫຼືການບາດເຈັບ, ປະຕິບັດຕາມຂໍ້ຄວນລະວັງຄວາມປອດໄພຂັ້ນພື້ນຖານສະເໝີ:

• ອ່ານຄໍາແນະນໍາທັງຫມົດ: Familiarize yourself with the controls and proper use of the pottery wheel.
• ຄວາມປອດໄພທາງໄຟຟ້າ: ໃຫ້ແນ່ໃຈວ່າການສະຫນອງພະລັງງານກົງກັບ voltage requirements of the machine. Do not operate with wet hands or in wet conditions. Always plug into a grounded outlet.
• Integrated Circuit Breaker (RCD): The machine is equipped with an RCD for enhanced safety. Test the RCD before each use by pressing the "TEST" button. The RCD should trip. Reset it by pressing "RESET" or flipping the switch to "OPEN". If it does not trip, do not use the machine and contact support.
• ການເບິ່ງແຍງກວດກາ: Close supervision is necessary when the pottery wheel is used by or near children or individuals with reduced physical, sensory, or mental capabilities.
• ລຶບພື້ນທີ່ເຮັດວຽກ: Keep your workspace clean, well-lit, and free from clutter.
• ຄວາມປອດໄພສ່ວນຕົວ: Wear appropriate clothing; avoid loose clothing, jewelry, or long hair that could get caught in moving parts.
• ບໍາລຸງຮັກສາ: ໃຫ້ຖອດສາຍໄຟອອກກ່ອນທຳຄວາມສະອາດ ຫຼື ປະຕິບັດການບຳລຸງຮັກສາໃດໆ.
• ການ​ນໍາ​ໃຊ້​ຈຸດ​ປະ​ສົງ​: Use the pottery wheel only for its intended purpose of shaping clay.

3. ເນື້ອໃນຊຸດ

ຫຼັງ​ຈາກ​ການ​ຍົກ​ເລີກ​ການ​ຫຸ້ມ​ຫໍ່​, ກະ​ລຸ​ນາ​ແນ່​ໃຈວ່​າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ແລະ​ບໍ່​ເສຍ​ຫາຍ​:

• CREWORKS Electric Pottery Wheel (Main Unit)
• Removable ABS Splash Basin
• ຕີນ Pedal
• 8-Piece Clay Sculpting Tool Set
• ຄູ່ມືຜູ້ໃຊ້

ຮູບທີ 3.1: Pottery wheel and included accessories.

4. ຜະລິດຕະພັນເກີນview

Familiarize yourself with the main components of your pottery wheel:

ຮູບທີ 4.1: Main components of the pottery wheel.

• Turntable (Wheel Head): 25 cm aluminum alloy wheel for shaping clay.
• Splash Basin: Removable ABS basin to contain water and clay splatter.
• ສັບປ່ຽນພະລັງງານ: ເປີດ/ປິດເຄື່ອງຈັກ.
• Directional Adjustment Knob (FOR/REV): Selects clockwise (FOR) or counter-clockwise (REV) rotation.
• ຕີນ Pedal: Controls the speed of the turntable.
• RCD (Residual Current Device): Integrated safety device with TEST and RESET buttons.
• ໄຟຕົວຊີ້ວັດພະລັງງານ: Indicate power status.

ຮູບທີ 4.2: Directional Switch.

ຮູບທີ 4.3: RCD (Circuit Breaker).

ຮູບທີ 4.4: Foot Pedal for Speed Control.

ຮູບທີ 4.5: Aluminum Alloy Turntable.

5. ຕັ້ງຄ່າ

1. ການຫຸ້ມຫໍ່: ເອົາສ່ວນປະກອບທັງຫມົດອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ. ກວດເບິ່ງຄວາມເສຍຫາຍໃດໆໃນລະຫວ່າງການຂົນສົ່ງ.
2. ການຈັດວາງ: Place the pottery wheel on a stable, level surface. Ensure there is adequate space around the machine for comfortable operation and to prevent clay splatter from affecting other items.
3. Attach Splash Basin: Position the removable ABS splash basin around the turntable. Ensure it is securely seated to prevent leaks.
4. ເຊື່ອມຕໍ່ຕີນກະເບື້ອງ: Plug the foot pedal cable into the designated port on the side of the pottery wheel.
5. ການເຊື່ອມຕໍ່ພະລັງງານ: ສຽບສາຍໄຟໃສ່ບ່ອນສຽບໄຟຟ້າທີ່ມີດິນ.
6. ການທົດສອບ RCD: Before first use and each subsequent use, perform the RCD test as described in the Safety Instructions (Section 2).

ຮູບທີ 5.1: Pottery wheel dimensions and typical usage environments.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

1. ເປີດ: Flip the main power switch to the "ON" position. The power indicator light should illuminate.
2. ເລືອກທິດທາງການຫມຸນ: Use the directional adjustment knob (FOR/REV) to select your desired rotation. "FOR" is clockwise, and "REV" is counter-clockwise. This allows for comfortable use by both right-handed and left-handed individuals.
3. Place Clay: Center a lump of prepared clay firmly on the turntable.
4. ຄວບຄຸມຄວາມໄວ: Gently press the foot pedal to start the turntable rotation. Increase pressure on the pedal to increase the speed (up to 300 RPM). Release pressure to slow down or stop the wheel. This hands-free control allows you to use both hands for shaping the clay.
5. ຮູບຮ່າງ: Begin shaping your clay using appropriate techniques and tools. Maintain a consistent speed for best results.
6. ປິດພະລັງງານ: Once finished, release the foot pedal, turn the main power switch to "OFF", and unplug the machine from the power outlet.

ຮູບທີ 6.1: Hands-free speed control using the foot pedal.

ຮູບທີ 6.2: Shaping clay on the pottery wheel.

7. ບໍາລຸງຮັກສາ

Regular cleaning and maintenance will ensure the longevity and optimal performance of your pottery wheel.

• ຕັດການເຊື່ອມຕໍ່ພະລັງງານ: Always unplug the pottery wheel from the power outlet before cleaning or performing any maintenance.
• Clean Splash Basin: Remove the ABS splash basin and thoroughly clean it after each use to prevent clay buildup. Rinse with water and wipe dry.
• Cleantable: Wipe down the aluminum turntable with a damp cloth to remove any clay residue. Avoid using abrasive cleaners that could scratch the surface.
• Clean Machine Body: Wipe the main body of the machine with a damp ຜ້າ. ໃຫ້ແນ່ໃຈວ່າບໍ່ມີນ້ໍາເຂົ້າໄປໃນອົງປະກອບໄຟຟ້າ.
• ການເກັບຮັກສາ: Store the pottery wheel in a dry, dust-free environment when not in use.
• ຫຼີກເວັ້ນການແຊ່ນ້ໍາ: Never immerse the main unit of the pottery wheel in water.

8. ການແກ້ໄຂບັນຫາ

ຖ້າ​ຫາກ​ທ່ານ​ພົບ​ບັນ​ຫາ​ໃດ​ຫນຶ່ງ​, ເບິ່ງ​ຄູ່​ມື​ການ​ແກ້​ໄຂ​ບັນ​ຫາ​ດັ່ງ​ຕໍ່​ໄປ​ນີ້​:

For problems not listed above, or if solutions do not resolve the issue, please contact CREWORKS customer support.

9. ຂໍ້ມູນຈໍາເພາະ

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

CREWORKS products are designed for durability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact CREWORKS customer service directly. Please have your model number (LPJ-NLJ1-EU) and purchase date available when contacting support.