1. ບົດແນະນຳ
Thank you for choosing the CREWORKS 2L Ultrasonic Cleaner. This device is designed to provide efficient and thorough cleaning for a wide range of items, including jewelry, glasses, watches, and various small parts. Utilizing ultrasonic waves, it offers a superior cleaning experience compared to traditional methods, reaching intricate surfaces and tight corners. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new ultrasonic cleaner.
Image: The CREWORKS 2L Ultrasonic Cleaner, highlighting its ability to eliminate cleaning difficulties for various items.
2. ຄໍາແນະນໍາຄວາມປອດໄພ
Please read all safety instructions carefully before operating the unit.
- ບໍ່ disassemble the unit. Unauthorized disassembly may lead to electric shock or damage to the device.
- ຫ້າມໃຊ້ທີ່ບໍ່ມີການດູແລ. Always supervise the cleaner during operation.
- ໃຫ້ແນ່ໃຈວ່າມີ sufficient fluid in the tank before operation. Operating without adequate fluid can damage the ultrasonic transducer.
- Unplug the unit before filling or draining the tank to prevent electrical hazards.
- Keep the unit away from water sources and do not immerse the main body in water.
- ຢ່າແຕະປລັກສຽບໄຟດ້ວຍມືປຽກ.
- ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
- Use only appropriate cleaning solutions. Do not use flammable, corrosive, or abrasive liquids.
- Ensure proper ventilation during use, especially if using specialized cleaning solutions.
Image: The ultrasonic cleaner showing the warning label on the lid, emphasizing critical safety precautions.
3. ຜະລິດຕະພັນເກີນview
The CREWORKS 2L Ultrasonic Cleaner features a durable stainless steel tank and an intuitive control panel. Familiarize yourself with the components:
- ຖັງສະແຕນເລດ: The main reservoir for cleaning solution and items.
- ກະດານຄວບຄຸມ: Features knobs for temperature and time settings, and toggle switches for cleaning modes.
- ປຸ່ມຄວບຄຸມອຸນຫະພູມ: Adjusts heating temperature from 70°F to 210°F.
- ປຸ່ມຄວບຄຸມເວລາ: Sets cleaning duration from 1 to 30 minutes.
- ສະຫຼັບໂໝດ: Select between 'Semi-Wave' (Gentle) and 'Full Wave' (Standard) ultrasonic cleaning, and 'Degas' function.
- ຈໍດິຈິຕອນ: Shows current temperature or remaining time.
- ມືຈັບ: ມືຈັບປະສົມປະສານເພື່ອຄວາມສະດວກໃນການພົກພາ.
- ຝາປິດ: Helps contain splashes and reduce noise during operation.
- ກະຕ່າເຮັດຄວາມສະອາດ: A removable basket for holding items during cleaning, preventing them from resting directly on the tank bottom.
Image: The ultrasonic cleaner positioned on a kitchen counter, highlighting its user-friendly control knobs for time and temperature.
4. ຕັ້ງຄ່າ
- ແກະກ່ອງ: ເອົາເຄື່ອງເຮັດຄວາມສະອາດ ultrasonic ແລະອຸປະກອນເສີມທັງໝົດອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ.
- ການຈັດວາງ: Place the unit on a stable, flat, and dry surface, ensuring adequate ventilation around the machine.
- ຕື່ມຖັງ: Ensure the unit is unplugged. Fill the stainless steel tank with an appropriate cleaning solution. Do not exceed the maximum fill line. The fluid level should be sufficient to cover the items to be cleaned.
- ໃສ່ກະຕ່າ: ໃສ່ກະຕ່າເຮັດຄວາມສະອາດລົງໃນຖັງ.
- ເຊື່ອມຕໍ່ພະລັງງານ: ສຽບສາຍໄຟໃສ່ບ່ອນສຽບໄຟຟ້າທີ່ມີດິນ.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
Follow these steps to operate your ultrasonic cleaner:
- ກະກຽມລາຍການ: ໃສ່ສິ່ງຂອງທີ່ຕ້ອງການທຳຄວາມສະອາດລົງໃນກະຕ່າທຳຄວາມສະອາດ. ຮັບປະກັນວ່າສິ່ງຂອງບໍ່ແອອັດເກີນໄປ ແລະ ຈົມຢູ່ໃນນ້ຳຢາທຳຄວາມສະອາດໝົດແລ້ວ.
- ປິດຝາ: Securely close the lid of the ultrasonic cleaner.
- ຕັ້ງຄ່າອຸນຫະພູມ (ທາງເລືອກ): Turn the Temperature Control Knob to your desired temperature (70-210°F). The built-in heater will begin warming the solution. Heating speeds up the cleaning process for certain contaminants.
- ເລືອກໂໝດ:
- Degas Mode: Toggle the 'Degas' switch to ON. This mode quickly removes dissolved gases from the cleaning solution, enhancing cavitation efficiency and preventing oxidation of cleaned objects. Run for 1-2 minutes before cleaning, especially with fresh solution.
- Gentle Mode (Semi-Wave): For delicate items like circuit boards, certain jewelry, or fragile surfaces, toggle the 'Semi-Wave' switch to ON. This halves the ultrasonic power, providing a gentler cleaning action.
- Standard Mode (Full Wave): For general cleaning and stubborn grime, ensure the 'Full Wave' switch is ON (and 'Semi-Wave' is OFF). This utilizes the full ultrasonic power.
Image: Visual explanation of the Degassing Mode, which removes gases for better cavitation, and the Gentle Mode, which reduces cleaning intensity for delicate items.
- ຕັ້ງເວລາ: Turn the Time Control Knob to your desired cleaning duration (1-30 minutes). The digital display will show the countdown.
- ເລີ່ມທໍາຄວາມສະອາດ: The unit will automatically start the cleaning process once the time is set. Ultrasonic waves will generate cavitation bubbles that dislodge dirt and grime.
- ສໍາເລັດຮູບ: Once the timer reaches zero, the cleaning cycle will stop. Unplug the unit before removing items.
- ລ້າງລາຍການ: Carefully remove the basket and rinse the cleaned items under clean water to remove any remaining solution or loosened debris. Dry thoroughly.
Image: Demonstrates the visible cleaning effect with before-and-after comparisons of eyeglasses, a razor, and a circuit board.
6. ບໍາລຸງຮັກສາ
ການບຳລຸງຮັກສາທີ່ເໝາະສົມຮັບປະກັນອາຍຸການໃຊ້ງານທີ່ຍາວນານ ແລະ ປະສິດທິພາບທີ່ດີທີ່ສຸດຂອງເຄື່ອງເຮັດຄວາມສະອາດ ultrasonic ຂອງທ່ານ:
- ການລະບາຍນໍ້າ: After each use, especially if the solution is dirty, unplug the unit and carefully drain the cleaning solution.
- ທໍາຄວາມສະອາດຖັງໄດ້: Wipe the inside of the stainless steel tank with a soft cloth. For stubborn residue, use a mild, non-abrasive cleaner. Rinse thoroughly with clean water and dry completely.
- ການອະນາໄມພາຍນອກ: ເຊັດດ້ານນອກຂອງ ໜ່ວຍ ດ້ວຍການໂຄສະນາamp ຜ້າ. ຫ້າມໃຊ້ສານເຄມີທີ່ຮຸນແຮງ ຫຼືຈຸ່ມຫົວໜ່ວຍໃນນ້ຳ.
- ການເກັບຮັກສາ: Store the cleaner in a cool, dry place away from direct sunlight and moisture when not in use. Ensure the tank is empty and dry.
- ການກວດກາປົກກະຕິ: Periodically check the power cord for any signs of damage. If damaged, discontinue use and contact customer support.
7. ການແກ້ໄຂບັນຫາ
If you encounter issues with your CREWORKS Ultrasonic Cleaner, refer to the following common problems and solutions:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ຫນ່ວຍບໍລິການບໍ່ເປີດ. | No power supply; Power cord not properly connected; Unit malfunction. | Check power outlet and cord connection. Ensure the power switch is ON. If problem persists, contact customer support. |
| Cleaning effect is poor. | Insufficient cleaning solution; Incorrect cleaning solution; Overcrowded items; Degas mode not used; Too short cleaning time. | Ensure items are fully submerged. Use appropriate solution for items. Do not overcrowd. Use Degas mode for new solutions. Increase cleaning time. |
| ສິ່ງລົບກວນຜິດປົກກະຕິໃນລະຫວ່າງການປະຕິບັດງານ. | Unit not on a stable surface; Tank empty or insufficient fluid; Foreign object in tank. | Place on a stable surface. Ensure sufficient fluid. Check for and remove any foreign objects. |
| ຟັງຊັນການໃຫ້ຄວາມຮ້ອນບໍ່ເຮັດວຽກ. | Temperature knob not set; Heater malfunction. | Ensure temperature knob is set to a desired temperature. If problem persists, contact customer support. |
If the issue persists after trying these solutions, please contact CREWORKS customer support for further assistance.
8. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ຕົວແບບ | B0CZNX678Q |
| ຍີ່ຫໍ້ | ຊ່າງ |
| ປະລິມານຖັງ | 2 ລິດ (0.5 ກາລອນ) |
| ພະລັງງານ Ultrasonic | 60W |
| ພະລັງງານຄວາມຮ້ອນ | 100W |
| ຄວາມຖີ່ Ultrasonic | 40 kHz |
| ຊ່ວງເວລາຈັບເວລາ | 1-30 ນາທີ |
| ຊ່ວງອຸນຫະພູມ | 70-210°F (20-99°C) |
| ວັດສະດຸຖັງ | 304 ສະແຕນເລດ |
| ຂະໜາດລວມ | 6.9 x 6.5 x 8.1 ນິ້ວ (ປະມານ) |
| ຂະ ໜາດ ຖັງ | 5.9 x 5.3 x 3.9 ນິ້ວ (ປະມານ) |
| ນ້ຳໜັກ | 5.4 ປອນ (ປະມານ) |
Image: Detailed specifications including the dimensions of the ultrasonic cleaner unit, its internal tank, and the cleaning basket.
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
CREWORKS products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your product or visit the official CREWORKS website. You may also contact customer service via the contact information provided on your purchase receipt or the product packaging.
ຜູ້ຜະລິດ: ຊ່າງ
ວັນທີທໍາອິດທີ່ມີ: ວັນທີ 6 ມິຖຸນາ 2024
