ຄູ່ມືການໃຊ້ງານເຄື່ອງກຳເນີດໄຟຟ້າ Pulsar PGL9000BCO 9,000 ວັດ ທີ່ໃຊ້ນໍ້າມັນເຊື້ອໄຟຄູ່

1. ຂໍ້ມູນຄວາມປອດໄພ

Read and understand this entire manual before operating the generator. Failure to follow instructions can result in serious injury or death.

ອັນຕະລາຍຄາບອນໂມໂນໄຊ (CO).

• Generators produce carbon monoxide, a colorless, odorless, poisonous gas.
• ບໍ່ເຄີຍ operate the generator indoors, in a garage, basement, crawlspace, or any other enclosed or partially enclosed area.
• ເຮັດວຽກເຄື່ອງປັ່ນໄຟຢູ່ກາງແຈ້ງຢູ່ບ່ອນມີລະບາຍອາກາດໄດ້ດີ, ຫ່າງໄກຈາກປ່ອງຢ້ຽມ, ປະຕູ, ແລະຊ່ອງລະບາຍອາກາດ.
• The Pulsar PGL9000BCO is equipped with a CO Sentry™ system that automatically shuts down the engine if dangerous levels of carbon monoxide are detected. Do not bypass or disable this safety feature.

ອັນຕະລາຍຈາກໄຟ

• Gasoline and propane are highly flammable and explosive.
• Refuel only in a well-ventilated area with the engine off and cool.
• ຮັກສານໍ້າມັນເຊື້ອໄຟໃຫ້ຫ່າງໄກຈາກດອກໄຟ, ແປວໄຟ, ໄຟທົດລອງ, ຄວາມຮ້ອນ, ແລະແຫຼ່ງໄຟໄຫມ້ອື່ນໆ.
• ຢ່າເຕີມເຕັມຖັງນໍ້າມັນ.

ອັນຕະລາຍຈາກໄຟຟ້າຊອດ

• Never operate the generator in wet conditions.
• ໃຫ້ແນ່ໃຈວ່າເຄື່ອງກໍາເນີດໄຟຟ້າຖືກຮາກຖານຢ່າງຖືກຕ້ອງກ່ອນທີ່ຈະນໍາໃຊ້.
• Do not connect the generator directly to a building's electrical system without a transfer switch installed by a qualified electrician.

2. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ແລະ​ບໍ່​ໄດ້​ຮັບ​ຄວາມ​ເສຍ​ຫາຍ​ຫຼັງ​ຈາກ​ການ​ປົດ​ຫຸ້ມ​ຫໍ່​.

• Pulsar PGL9000BCO Dual-Fuel Generator
• Wheel Kit (wheels, axles, hardware)
• Handle Kit (handle, hardware)
• ທໍ່ Propane ກັບ Regulator
• ແບັດເຕີຣີ 12V
• Wrench Plug Spark
• Funnel ນ້ ຳ ມັນ
• ຄູ່ມືເຈົ້າຂອງ

3. ຜະລິດຕະພັນເກີນview

Familiarize yourself with the components of your generator.

ອົງປະກອບຜະລິດໄຟຟ້າ

ກະດານຄວບຄຸມ

• 3-in-1 Data Center Display: Shows Volts, Frequency, and Hours of operation.
• ສະຫຼັບເຄື່ອງຈັກ: Controls engine start and stop.
• ສະຫຼັບນໍ້າມັນ: Selects between Gasoline and LPG (Propane) operation.
• CO Sentry™: Carbon Monoxide detection system with indicator lights.
• Low Oil Alert: Indicator light for low engine oil level.
• ເຕົ້າສຽບໄຟ AC:
  • Four 120V AC 20A outlets (5-20R)
  • One 120V AC 25A Twist-Lock outlet (L5-30R)
  • One 120V/240V AC 25A Twist-Lock outlet (L14-30R)
• DC 12V 8.3A Output: ສໍາລັບການສາກໄຟຫມໍ້ໄຟ 12V.
• ຕົວຕັດວົງຈອນ: Protect outlets from overload.
• ສະຖານີດິນ: For connecting an external ground wire.

4. ຕັ້ງຄ່າ

4.1 ສະພາ

1. ຕິດລໍ້: Securely fasten the wheels to the generator frame using the provided axles and hardware.
2. ຕິດ​ຕັ້ງ Handle​: Attach the handle to the frame. Ensure it is firmly in place for safe transport.

4.2 ຕື່ມນ້ຳມັນເຄື່ອງ

The generator is shipped without engine oil. Always check the oil level before each use.

1. ວາງເຄື່ອງປັ່ນໄຟໃສ່ພື້ນຜິວລະດັບ ໜຶ່ງ.
2. ເອົາຝາປິດໃສ່ນໍ້າມັນ/ຈຸ່ມ.
3. Using the provided oil funnel, slowly add the recommended engine oil (SAE 10W-30) until the oil level reaches the upper mark on the dipstick. Do not overfill.
4. ປ່ຽນຝາປິດ/ໄມ້ວັດລະດັບນ້ຳມັນເຄື່ອງ.

4.3 Connect Battery

The 12V battery for electric start may be disconnected for shipping.

1. ຊອກຫາຊ່ອງໃສ່ຫມໍ້ໄຟ.
2. Connect the positive (+) red cable to the positive (+) battery terminal.
3. Connect the negative (-) black cable to the negative (-) battery terminal.
4. ໃຫ້ແນ່ໃຈວ່າການເຊື່ອມຕໍ່ປອດໄພ.

4.4 Fueling the Generator

The PGL9000BCO operates on either gasoline or propane.

ສໍາ​ລັບ​ນ​້​ໍາ​ມັນ​:

• Use only regular unleaded gasoline with an octane rating of 87 or higher.
• ໃຫ້ແນ່ໃຈວ່າເຄື່ອງຈັກປິດຢູ່ ແລະ ເຢັນລົງກ່ອນທີ່ຈະຕື່ມນໍ້າມັນເຊື້ອໄຟ.
• Fill the 7-gallon fuel tank, leaving some space for expansion. Do not overfill.

For Propane (LPG):

• Connect the provided propane hose and regulator to a standard propane tank.
• Connect the other end of the hose to the LPG inlet on the generator's control panel.
• ໃຫ້ແນ່ໃຈວ່າການເຊື່ອມຕໍ່ທັງຫມົດແມ່ນແຫນ້ນແລະບໍ່ຮົ່ວໄຫຼ.

5. ການດໍາເນີນງານ

5.1 ການເລີ່ມຕົ້ນເຄື່ອງກໍາເນີດໄຟຟ້າ

Ensure the generator is placed outdoors in a well-ventilated area.

1. ກວດເບິ່ງລະດັບນໍ້າມັນເຄື່ອງ.
2. Ensure the fuel tank is filled with gasoline or a propane tank is connected.
3. Turn the fuel valve to the "ON" position (for gasoline). If using propane, open the valve on the propane tank.
4. Select the desired fuel type (Gas or LPG) using the fuel switch on the control panel.
5. Move the choke lever to the "CHOKE" position (if starting a cold engine).
6. For Electric Start: Turn the engine switch to "START" and hold until the engine starts. Release the switch once the engine is running.
7. For Recoil Start: ດຶງມືຈັບສະຕາດຖອຍຫຼັງໃຫ້ແໜ້ນຈົນກວ່າເຄື່ອງຈັກຈະສະຕາດ.
8. ເມື່ອເຄື່ອງຈັກເລີ່ມຕົ້ນ, ຄ່ອຍໆຍ້າຍ choke lever ໄປຕໍາແຫນ່ງ "RUN".
9. Allow the generator to run for a few minutes to warm up before connecting electrical devices.

5.2 ການເຊື່ອມຕໍ່ອຸປະກອນໄຟຟ້າ

• ໃຫ້ແນ່ໃຈວ່າເຄື່ອງກຳເນີດໄຟຟ້າເຮັດວຽກໄດ້ຢ່າງລຽບງ່າຍ.
• Plug in your electrical devices one at a time, starting with the highest wattage ອຸປະກອນ.
• ຢ່າໃຊ້ພະລັງງານເກີນຄ່າທີ່ກຳນົດໄວ້ຂອງເຄື່ອງກຳເນີດໄຟຟ້າtage. Monitor the 3-in-1 display for load information.

5.3 Fuel Switching (Switch & Go Technology)

The Pulsar PGL9000BCO features Switch & Go technology, allowing seamless transition between fuel types while the generator is running.

To switch fuel sources:

1. Ensure the generator is running.
2. If switching from gasoline to propane: Close the gasoline fuel valve. Allow the engine to run until it consumes the remaining gasoline in the carburetor and stalls. Then, open the propane tank valve and select "LPG" on the fuel switch. Restart the generator.
3. If switching from propane to gasoline: Close the propane tank valve. Select "Gas" on the fuel switch. Open the gasoline fuel valve. Restart the generator.

5.4 ການປິດເຄື່ອງຜະລິດ

1. ຖອດອຸປະກອນໄຟຟ້າທັງໝົດອອກຈາກເຄື່ອງກຳເນີດໄຟຟ້າ.
2. ຫັນປ່ຽນເຄື່ອງຈັກໄປຫາຕໍາແຫນ່ງ "ປິດ".
3. Close the fuel valve (for gasoline) or the propane tank valve (for LPG).

6. ບໍາລຸງຮັກສາ

ການບຳລຸງຮັກສາເປັນປະຈຳຮັບປະກັນປະສິດທິພາບທີ່ດີທີ່ສຸດ ແລະ ອາຍຸການໃຊ້ງານທີ່ຍາວນານຂອງເຄື່ອງກຳເນີດໄຟຟ້າຂອງທ່ານ.

• ນ້ຳມັນເຄື່ອງ: ກວດເບິ່ງລະດັບນ້ໍາມັນກ່ອນທີ່ຈະໃຊ້ແຕ່ລະຄັ້ງ. ປ່ຽນນ້ຳມັນເຄື່ອງພາຍຫຼັງ 20 ຊົ່ວໂມງທຳອິດຂອງການປະຕິບັດງານ, ຈາກນັ້ນທຸກໆ 100 ຊົ່ວໂມງ ຫຼື ຕໍ່ປີ.
• ການກັ່ນຕອງອາກາດ: Clean or replace the air filter every 50 hours or more frequently in dusty conditions.
• ປລັກສຽບໄຟ: ກວດກາ ແລະເຮັດຄວາມສະອາດຫົວຫົວທຸກ 100 ຊົ່ວໂມງ. ປ່ຽນແທນຖ້າຈໍາເປັນ.
• ການກັ່ນຕອງນໍ້າມັນ: Inspect periodically and replace if clogged.
• ທໍາຄວາມສະອາດທົ່ວໄປ: ຮັກສາເຄື່ອງປັ່ນໄຟໃຫ້ສະອາດ ແລະບໍ່ມີສິ່ງເສດເຫຼືອ.

7. ການແກ້ໄຂບັນຫາ

ອ້າງອີງໃສ່ພາກນີ້ສໍາລັບບັນຫາທົ່ວໄປແລະການແກ້ໄຂຂອງພວກເຂົາ.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Pulsar products are backed by a manufacturer's warranty. For specific warranty details, registration, or technical support, please refer to the warranty card included with your product or visit the official Pulsar webເວັບໄຊ.

For customer service and technical assistance, please contact Pulsar support directly.