ຄູ່ມືຜູ້ໃຊ້ LINOVISION 24 ພອດ L2 Managed PoE Switch (POE-SW324GM-4BT)

1. ບົດແນະນຳ

This user manual provides detailed instructions for the LINOVISION 24 Ports L2 Managed PoE Switch, Model POE-SW324GM-4BT. It covers product features, package contents, setup procedures, operating guidelines, maintenance tips, troubleshooting, and technical specifications. Please read this manual thoroughly before operating the device to ensure proper installation and functionality.

LINOVISION 24 Ports L2 Managed PoE Switch front view

ຮູບພາບ 1.1: ດ້ານຫນ້າ view of the LINOVISION 24 Ports L2 Managed PoE Switch.

2. ເນື້ອໃນຊຸດ

Verify that all items listed below are included in your package. If any item is missing or damaged, please contact LINOVISION support.

PoE Switch (POE-SW324GM-4BT)
Power Adapter
ຄູ່ມືຜູ້ໃຊ້
Rack Mount ອຸປະກອນເສີມ

Diagram showing the LINOVISION PoE Switch, power adapter, user manual, and rack mount accessories

Image 2.1: Contents of the LINOVISION PoE Switch package, including the switch, power adapter, user manual, and rack mount accessories.

3. ຜະລິດຕະພັນເກີນview

3.1 ກະດານດ້ານ ໜ້າ

The front panel of the LINOVISION POE-SW324GM-4BT features various ports and LED indicators for monitoring network activity and power status.

Diagram of the LINOVISION PoE Switch front panel showing system indicator, PoE/Link indicator, power indicator, console port, 4x 90W Gigabit PoE ports, 20x 30W Gigabit PoE ports, 4x Gigabit Combo ports, and factory reset button.

ຮູບພາບ 3.1: ລາຍລະອຽດ view of the switch's front panel, highlighting the console port, 4x 90W Gigabit PoE ports (P1-P4), 20x 30W Gigabit PoE ports (P5-P24), and 4x Gigabit Combo ports (Uplink 1-4).

3.2 ແຜງດ້ານຫລັງ

The rear panel includes the power input, power switch, and a ground terminal for safety.

Diagram showing the front and rear panels of the LINOVISION PoE Switch. The rear panel highlights the power switch, ground terminal, and 100-240V AC input.

ຮູບພາບທີ 3.2: ລວມກັນ view of the front and rear panels. The rear panel shows the power switch, ground terminal, and AC power input.

4. ຄຸນສົມບັດ

4 BT 90W PoE++ Ports: Ports 1-4 support up to 90W output, providing sufficient power for IEEE 802.3af/at/bt compliant PoE devices such as IP cameras, PTZ cameras, access points, VoIP phones, and PoE monitors.

Diagram illustrating the 4 BT 90W PoE ports and their connection to various PoE devices like PoE, PoE+, PoE++ devices, and non-PoE devices via network cables.

Image 4.1: Illustration of the 4 BT 90W PoE ports and their compatibility with different PoE device types.

Built-in 370W PoE Power Budget: The switch features a maximum total PoE budget of 370W, with 4 BT 90W ports and 20 AT 30W ports, capable of supporting multiple high-power PoE devices.

Diagram showing the LINOVISION switch with a total PoE budget of 370W, indicating maximum 90W per port for the first four ports and maximum 30W per port for the remaining 20 ports.

Image 4.2: Visual representation of the switch's PoE power distribution and total budget.

Full Gigabit Connectivity: Provides 4x 10/100/1000Mbps PoE++ ports, 20x 10/100/1000Mbps PoE+ ports, and 4x Combo Ports. Each Combo Port includes one RJ45 port and one SFP port, allowing selection of either based on network requirements, but not both simultaneously.

Diagram showing the LINOVISION switch with an arrow indicating 1000Mbps, emphasizing its full Gigabit capability. A magnified inset shows the combo ports with both RJ45 and SFP options.

Image 4.3: Illustration of the switch's full Gigabit speed and the flexibility of its combo ports.

L2 Managed Capabilities: Supports Layer 2 management functions including VLAN, QoS, ACL, and PoE control (On/Off). Management can be performed via WEB interface, Command Line Interface (CLI), or SNMP.

Screenshot of the L2 Management web interface for the LINOVISION switch, showing options for VLAN, QoS, ACL, and PoE Management, among others.

ຮູບພາບ 4.4: ຕົວຢ່າງample of the L2 Management interface, demonstrating various configurable network settings.

Advanced Safety for PoE and Non-PoE Devices: Utilizes a standard 4-step PoE power-up process (PD Detection -> PoE Power Classification negotiation -> Start up -> Power ON). This ensures appropriate power delivery to 802.3af/at/bt devices, preventing overloading, and avoids supplying power to non-PoE devices to prevent damage.

Graph illustrating the 4-step PoE power-up process: Detection, Classification, Start Up, and Power ON, showing PD input voltage over time and different power types.

Image 4.5: Graph detailing the safe power negotiation process for PoE devices.

Solid and Durable Design: Features a full metal enclosure with dimensions of 17.32'' x 11.42'' x 1.75'' (440mm x 290mm x 44.5mm), and a built-in 370W power supply. It offers a wide operating temperature range (-10°C to 45°C), 64Gbps switching capacity, IP40 protection, and 6KV surge protection.

Four icons representing solid design features: temperature range (14°F to 113°F), 64Gbps switching capacity, IP40 full metal enclosure, and 6KV surge protection.

ຮູບພາບ 4.6: ຫຼາຍກວ່າview of the switch's robust physical design and protective features.

Important PoE++ Compatibility Note: The term "PoE++" does not have a single unified standard and may not fully correspond to the IEEE 802.3bt protocol. Users should confirm if their "PoE++" Powered Device (PD) is also an IEEE 802.3bt device for guaranteed compatibility and proper operation.

5. ຕັ້ງຄ່າ

This section guides you through the initial setup of your LINOVISION PoE Switch.

5.1 Unboxing ແລະ Initial Inspection

Carefully unbox the switch and its accessories. Inspect all components for any signs of damage during transit. Refer to the 'Package Contents' section to ensure all items are present.

Video 5.1: This video demonstrates the unboxing process of the LINOVISION 24 Port L2 Managed BT 90W PoE Switch, showing how to safely remove the product and its accessories from the packaging.

5.2 ການຕິດຕັ້ງທາງດ້ານຮ່າງກາຍ

ການຕິດຕັ້ງ: Use the provided rack mount accessories to install the switch into a standard 19-inch server rack, if applicable. Ensure adequate ventilation around the device.
ການຕໍ່ດິນ: Connect the ground terminal on the rear panel to a proper earth ground using a grounding wire for electrical safety.
ການເຊື່ອມຕໍ່ພະລັງງານ: Connect the power adapter to the AC input on the rear panel and then to a suitable power outlet. Ensure the power switch is in the OFF position before connecting.

5.3 ການເຊື່ອມຕໍ່ເຄືອຂ່າຍ

Connecting PoE Devices: Connect your IEEE 802.3af/at/bt compliant PoE devices (e.g., IP cameras, access points) to the PoE ports (P1-P24) on the front panel using standard Ethernet cables.
Connecting Non-PoE Devices: Non-PoE network devices can also be connected to the PoE ports; the switch will automatically detect and not supply power to them.
ການເຊື່ອມຕໍ່ Uplink: Use the Gigabit Combo Ports (Uplink 1-4) to connect the switch to your core network, router, or other switches. You can use either the RJ45 or SFP port for each combo pair.
ການເຊື່ອມຕໍ່ຄອນໂຊນ: For initial configuration or advanced management via CLI, connect a console cable to the Console Port on the front panel and to a computer.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

Once the switch is physically installed and connected, you can begin operation and configuration.

6.1 ການເປີດເຄື່ອງ

Flip the power switch on the rear panel to the ON position. The Power Indicator LED on the front panel should illuminate, indicating the device is receiving power. The System Indicator LED will also light up, and PoE/Link indicators will show port status.

6.2 L2 Management Access

The LINOVISION PoE Switch supports various Layer 2 management methods:

Web- ການຄຸ້ມຄອງໂດຍອີງໃສ່: ເຂົ້າເຖິງສະວິດ web ການໂຕ້ຕອບໂດຍການໃສ່ທີ່ຢູ່ IP ຂອງມັນເຂົ້າໄປໃນ a web browser. The default IP address and login credentials can be found in the full user manual or quick start guide.
ການໂຕ້ຕອບເສັ້ນຄໍາສັ່ງ (CLI): Connect via the Console Port using a terminal emulator (e.g., PuTTY) for command-line configuration.
SNMP: The switch can be managed remotely using Simple Network Management Protocol (SNMP) for network monitoring and configuration.

6.3 Key Management Functions

Through the management interface, you can configure:

VLAN (Virtual Local Area Network): ແບ່ງສ່ວນເຄືອຂ່າຍຂອງທ່ານເພື່ອປັບປຸງຄວາມປອດໄພ ແລະ ປະສິດທິພາບ.
QoS (ຄຸນະພາບການບໍລິການ): ໃຫ້ຄວາມສຳຄັນກັບການຈະລາຈອນເຄືອຂ່າຍສຳລັບແອັບພລິເຄຊັນທີ່ສຳຄັນ.
ACL (ບັນຊີການຄວບຄຸມການເຂົ້າເຖິງ): ກັ່ນຕອງການຈະລາຈອນເຄືອຂ່າຍໂດຍອີງໃສ່ກົດລະບຽບທີ່ໄດ້ກຳນົດໄວ້.
PoE Control: Enable/disable PoE on specific ports, monitor power consumption, and schedule PoE operation.

7. ບໍາລຸງຮັກສາ

Regular maintenance ensures the longevity and optimal performance of your LINOVISION PoE Switch.

ທໍາຄວາມສະອາດ: ຮັກສາສະວິດໃຫ້ສະອາດ ແລະ ບໍ່ມີຝຸ່ນ. ໃຊ້ຜ້າອ່ອນໆ ແລະ ແຫ້ງເພື່ອທຳຄວາມສະອາດ. ຢ່າໃຊ້ນໍ້າຢາທຳຄວາມສະອາດ ຫຼື ນໍ້າຢາສີດ.
ການລະບາຍອາກາດ: Ensure that the ventilation openings are not blocked. Proper airflow is crucial to prevent overheating.
ການອັບເດດເຟີມແວ: Periodically check the LINOVISION webເວັບໄຊທ໌ສຳລັບການອັບເດດເຟີມແວ. ການຮັກສາເຟີມແວໃຫ້ທັນສະໄໝສາມາດປັບປຸງປະສິດທິພາບ, ເພີ່ມຄຸນສົມບັດໃໝ່ ແລະ ແກ້ໄຂຄວາມສ່ຽງດ້ານຄວາມປອດໄພ.
ເງື່ອນໄຂສິ່ງແວດລ້ອມ: Operate the switch within the recommended temperature and humidity ranges specified in the 'Specifications' section.

8. ການແກ້ໄຂບັນຫາ

If you encounter issues with your LINOVISION PoE Switch, refer to the following common troubleshooting steps:

ບໍ່ມີພະລັງງານ:
- Check if the power cable is securely connected to the switch and the power outlet.
- ກວດໃຫ້ແນ່ໃຈວ່າສະວິດໄຟຢູ່ແຜງດ້ານຫຼັງຢູ່ໃນຕຳແໜ່ງເປີດ.
- ກວດສອບວ່າປ່ຽງໄຟແມ່ນເຮັດວຽກໄດ້.
ບໍ່ມີການເຊື່ອມຕໍ່ເຄືອຂ່າຍ:
- Check the Ethernet cables for secure connections and damage.
- Verify the Link/Act LED indicators for the connected ports are active.
- Ensure IP address settings are correct if configured manually.
ອຸປະກອນ PoE ບໍ່ໄດ້ຮັບພະລັງງານ:
- Confirm the connected device is IEEE 802.3af/at/bt compliant.
- Check the PoE/Link indicator for the specific port.
- Ensure the total PoE budget (370W) is not exceeded by all connected devices.
- Verify PoE is enabled for the port in the L2 management interface.
ການເຂົ້າເຖິງ Web Interface Issues:
- ໃຫ້ແນ່ໃຈວ່າຄອມພິວເຕີຂອງທ່ານຢູ່ໃນສ່ວນເຄືອຂ່າຍດຽວກັນກັບສະວິດ.
- Try pinging the switch's IP address to confirm network reachability.
- ລຶບລ້າງແຄດຂອງບຼາວເຊີຂອງທ່ານ ຫຼືລອງໃຊ້ໂປຣແກຣມທ່ອງເວັບອື່ນ.

If these steps do not resolve the issue, please consult the full user manual or contact LINOVISION technical support.

9. ຂໍ້ມູນຈໍາເພາະ

Detailed technical specifications for the LINOVISION 24 Ports L2 Managed PoE Switch (POE-SW324GM-4BT).

ຄຸນລັກສະນະ	ມູນຄ່າ
ຂະໜາດສິນຄ້າ	17.32 x 11.42 x 1.75 ນິ້ວ (440mm x 290mm x 44.5mm)
ນ້ໍາຫນັກລາຍການ	9.28 ປອນ (4.21 ກິໂລ)
ໝາຍເລກຕົວແບບ	POE-SW324GM-4BT
ຜູ້ຜະລິດ	LINOVISION
ທ່າເຮືອ PoE	4x BT 90W PoE++ ports, 20x AT 30W PoE+ ports
Uplink Ports	4x Gigabit Combo Ports (RJ45/SFP)
ງົບປະມານ PoE ທັງໝົດ	370W
ຄວາມອາດສາມາດສະຫຼັບ	64Gbps
ການຄຸ້ມຄອງ	L2 Managed (WEB, CLI, SNMP), supports VLAN, QoS, ACL, PoE Control
ເອກະສານຄັດຕິດ	Full Metal, IP40
ການປ້ອງກັນໄຟຟ້າ	6KV

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

LINOVISION products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official LINOVISION website or contact their customer service directly. Details regarding warranty periods and support channels are typically provided with your purchase documentation or on the manufacturer's webເວັບໄຊ.

Manufacturer: LINOVISION

ສໍາລັບການຊ່ວຍເຫຼືອເພີ່ມເຕີມ, ໄປຢ້ຽມຢາມ: LINOVISION Official Store on Amazon