Reznor UDXC-150 150,000 BTU ອາຍແກັສທໍາມະຊາດ ຄູ່ມືຄໍາແນະນໍາເຄື່ອງເຮັດຄວາມຮ້ອນ

1. ການແນະນໍາ ແລະຫຼາຍກວ່າview

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Reznor UDXC-150 natural gas unit heater. The UDXC-150 is a 150,000 BTU commercial-grade forced air heater designed for various indoor spaces such as garages, workshops, and warehouses. It features an 83% thermal efficiency rating and is built for durability and quiet operation.

2. ຂໍ້ມູນຄວາມປອດໄພ

ຄຳເຕືອນ: ການຕິດຕັ້ງ, ການປັບ, ການປ່ຽນແປງ, ການບໍລິການ, ຫຼືການດູແລທີ່ບໍ່ເຫມາະສົມສາມາດເຮັດໃຫ້ເກີດຄວາມເສຍຫາຍຂອງຊັບສິນ, ການບາດເຈັບ, ຫຼືເສຍຊີວິດ. ອ່ານຄໍາແນະນໍາການຕິດຕັ້ງ, ການປະຕິບັດ, ແລະການບໍາລຸງຮັກສາຢ່າງລະອຽດກ່ອນທີ່ຈະຕິດຕັ້ງຫຼືການບໍລິການອຸປະກອນນີ້.

ຂໍ້ຄວນລະວັງຄວາມປອດໄພທົ່ວໄປ:

ການຕິດຕັ້ງແລະການບໍລິການຕ້ອງໄດ້ຮັບການປະຕິບັດໂດຍຜູ້ຕິດຕັ້ງທີ່ມີຄຸນວຸດທິ, ອົງການບໍລິການ, ຫຼືຜູ້ສະຫນອງອາຍແກັສ.
Ensure adequate ventilation is provided as per local codes and manufacturer instructions.
Maintain proper clearances from combustible materials as specified in the installation guide.
ຫ້າມເກັບຮັກສາ ຫຼືໃຊ້ນໍ້າມັນແອັດຊັງ ຫຼືອາຍພິດ ແລະຂອງແຫຼວທີ່ຕິດໄຟໄດ້ໃນບໍລິເວນໃກ້ຄຽງ ຫຼືເຄື່ອງໃຊ້ອື່ນໆ.
Never obstruct the air intake or exhaust vents.
Regularly inspect the unit for any signs of damage or malfunction.

3. ຄຸນລັກສະນະຂອງຜະລິດຕະພັນ

The Reznor UDXC-150 unit heater incorporates advanced technology for reliable and efficient heating:

ປະສິດທິພາບຄວາມຮ້ອນສູງ: Achieves an 83% AFUE (Annual Fuel Utilization Efficiency) rating.
ເຄື່ອງແລກປ່ຽນຄວາມຮ້ອນທີ່ທົນທານ: Features a TCORE2 titanium-stabilized aluminized steel heat exchanger for extended lifespan.
Advanced Ignition: Equipped with multi-try direct spark ignition with time lockout.
ການດໍາເນີນງານງຽບ: Designed for low noise with vibration-isolated fan and venter motors.
ຈໍສະແດງຜົນການວິນິດໄສ: Includes a 7-segment display board for simple troubleshooting and a status-indicating LED light.
ການຕິດຕັ້ງແບບຍືດຫຍຸ່ນ: Offers 2- and 4-point suspension options for ceiling or wall mounting (mounting hardware sold separately).
ການບໍາລຸງຮັກສາງ່າຍດາຍ: External gas connection for simplified service access.
ຮັບຮອງຄວາມປອດໄພ: ETL Approved.
Heating Flexibility: Single-burner design with two BTU outputs for varying temperature needs.

Reznor UDXC-150 Unit Heater with standard features listed: 83% AFUE Efficiency, Multi-Try Direct Spark Ignition, TCORE2 Titanium-Stabilized Aluminized Steel Heat Exchanger, Low Noise Operation.

This image displays the Reznor UDXC-150 unit heater and highlights its key standard features, including 83% AFUE efficiency, multi-try direct spark ignition with time lockout, a TCORE2 titanium-stabilized aluminized steel heat exchanger, and low noise operation due to vibration-isolated fan and venter motors.

Reznor UDXC-150 Unit Heater with additional standard features: Status-Indicating LED Light, 7-Segment Display Board, 2- and 4-Point Suspension Options, External Gas Connection, ETL Approved.

This image shows the Reznor UDXC-150 unit heater and details further standard features such as a status-indicating LED light, a 7-segment display board for troubleshooting, options for 2- and 4-point suspension, an external gas connection for ease of maintenance, and ETL approval.

4. ເນື້ອໃນຊຸດ

Your Reznor UDXC-150 unit heater package includes the following components:

Reznor UDXC-150 Natural Gas Unit Heater
Vertical Category 1 Double Wall B-Vent Kit (for venting out of a roof)

Vertical B-Vent Kit Components:

1x Reznor CCI Vent Cap
1x Draft Hood Connector
2x 12" Length Straight Pipe (5" diameter)
2x 24" Length Straight Pipe (5" diameter)
2x 60° Adjustable Elbow (5" diameter)
1x 90° Adjustable Elbow (5" diameter)
1x Roof Flashing (up to 5/12 Pitch)
1x 5" Diameter Storm Collar

Components of a 5-inch diameter double wall B-vent kit for vertical Category I venting, including vent cap, draft hood connector, straight pipes, adjustable elbows, roof flashing, and storm collar.

This image displays the various components included in a 5-inch diameter double wall B-vent kit for vertical Category I venting. The kit includes a Reznor CCI Vent Cap, a Draft Hood Connector, 12-inch and 24-inch straight pipes, 60-degree and 90-degree adjustable elbows, roof flashing, and a storm collar.

5. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Installation of the Reznor UDXC-150 unit heater requires adherence to all local codes and regulations, as well as the detailed instructions provided in the full installation manual. It is strongly recommended that installation be performed by a qualified and licensed professional.

ການພິຈາລະນາການຕິດຕັ້ງຫຼັກ:

ການຕິດຕັ້ງ: The unit can be ceiling-mounted or wall-mounted using appropriate suspension points. Mounting hardware is sold separately. Ensure the mounting structure can safely support the weight of the unit.
ການລະບາຍອາກາດ: This model includes a vertical Category 1 double wall B-vent kit. Proper venting is crucial for safety and efficiency. Follow all instructions for vent pipe assembly and roof flashing.
ການເຊື່ອມຕໍ່ອາຍແກັສ: Connect the unit to a natural gas supply line. All gas connections must be leak-tested by a qualified professional. The external gas connection is designed for ease of access.
ການເຊື່ອມຕໍ່ໄຟຟ້າ: The unit requires a 24V electrical connection. Ensure all wiring is done according to electrical codes and the manufacturer's specifications. The unit includes an external terminal strip for 24V wiring and a built-in enhanced disconnect switch.
ການອະນາໄມ: Maintain specified clearances from combustible materials around the heater and vent system.

Reznor UDXC-150 Unit Heater mounted on a ceiling in a workshop, with text describing compact and durable heating, suitable for commercial spaces and ceiling/wall mounting.

This image shows the Reznor UDXC-150 unit heater installed on a ceiling, emphasizing its compact and durable design. It highlights its suitability for larger commercial garages, warehouses, and industrial workspaces, and its capability for ceiling or wall mounting with multiple venting options.

Reznor UDXC-150 Unit Heater showing simplified installation and advanced features like removable front face, hinged access door, threaded-nut retainers, integrated circuit board, disconnect switch, LED, and external terminal strip.

This image highlights the simplified installation and advanced features of the Reznor UDXC-150 unit heater. It points out the updated cabinet structure with a removable front face, a hinged access door panel with a quarter-turn latch, threaded-nut retainers for ceiling or wall mounting, an enhanced integrated circuit board with a 7-segment display, a built-in enhanced disconnect switch, a status-indicating LED, and an external terminal strip for 24V wiring.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

Once properly installed and connected, the Reznor UDXC-150 unit heater is designed for straightforward operation, typically controlled by an external thermostat (not included).

ການດໍາເນີນງານພື້ນຖານ:

ເປີດ: Ensure the main power supply to the unit is switched on.
ການຄວບຄຸມເຄື່ອງຄວບຄຸມອຸນຫະພູມ: Set your external thermostat to the desired temperature. The heater will automatically cycle on and off to maintain the set temperature.
ຜົນຜະລິດຄວາມຮ້ອນ: The single-burner design offers two BTU outputs. The unit will automatically adjust between high fire for colder conditions and low fire for milder temperatures to ensure efficient heating.
ການໄຫຼວຽນຂອງອາກາດ: The low static pressure axial fan provides effective air circulation, distributing heat evenly throughout the space.
ຕົວຊີ້ບອກສະຖານະ: Observe the status-indicating LED and the 7-segment display board for operational status and any diagnostic codes.

For detailed startup procedures and advanced settings, refer to the complete operating manual.

7. ບໍາລຸງຮັກສາ

Regular maintenance ensures the longevity and efficient operation of your Reznor UDXC-150 unit heater. All maintenance should be performed by a qualified service technician.

ຕາຕະລາງການບໍາລຸງຮັກສາທີ່ແນະນໍາ:

ການກວດກາປະຈຳປີ: Have a qualified technician inspect the heat exchanger, burner, ignition system, fan motor, and all gas and electrical connections annually.
ທໍາຄວາມສະອາດ: Ensure the fan blades and heat exchanger fins are free from dust and debris to maintain optimal airflow and efficiency.
ກວດສອບລະບົບລະບາຍອາກາດ: Inspect the entire vent system for any blockages, leaks, or corrosion.
ອຸປະກອນຄວາມປອດໄພ: Verify the proper operation of all safety controls and limit switches.

ຕັດສາຍໄຟກັບໜ່ວຍທຸກຄັ້ງກ່ອນທີ່ຈະເຮັດການບຳລຸງຮັກສາ ຫຼືທຳຄວາມສະອາດ.

8. ການແກ້ໄຂບັນຫາ

The Reznor UDXC-150 is equipped with diagnostic features to assist in identifying operational issues. Refer to the full service manual for detailed troubleshooting steps.

Common Indicators and Actions:

ບໍ່ມີຄວາມຮ້ອນ / ຫນ່ວຍງານບໍ່ເລີ່ມຕົ້ນ: Check power supply, gas supply, and thermostat settings. Consult the 7-segment display for error codes.
ສິ່ງລົບກວນທີ່ຜິດປົກກະຕິ: Could indicate fan imbalance, motor issues, or debris. Disconnect power and inspect. If persistent, contact a technician.
ສະຖານະພາບ LED: The status-indicating LED provides a quick visual cue of the unit's operational state. Refer to the manual for specific flash codes.
7-Segment Display: This display will show diagnostic codes that pinpoint specific issues. Note the code and consult the troubleshooting section of the detailed manual.

If you are unable to resolve an issue, contact a qualified HVAC service technician.

9. ຂໍ້ມູນຈໍາເພາະ

ຄຸນສົມບັດ	ລາຍລະອຽດ
ຍີ່ຫໍ້	Reznor (Distributed by 1HVAC)
ໝາຍເລກຕົວແບບ	UDXC-150
ການໃຫ້ຄະແນນ BTU	150,000 BTU
ປະສິດທິພາບຄວາມຮ້ອນ	83% AFUE
ປະເພດນໍ້າມັນເຊື້ອໄຟ	ອາຍແກັສທໍາມະຊາດ
ວິທີການເຮັດຄວາມຮ້ອນ	ອາກາດບັງຄັບ
ປັດໄຈແບບຟອມ	Mounted (Ceiling/Wall)
ການນຳໃຊ້ພາຍໃນ/ນອກ	ພາຍໃນ
ຂະໜາດສິນຄ້າ (ກວ້າງ x ຍາວ x ສູງ)	48.44" x 38.19" x 20.13"
ຈໍານວນຄວາມໄວ	2
Vent Kit Included	Vertical Category 1 Double Wall B-Vent Kit (5-inch diameter)

Reznor UDXC-150 Unit Heater with dimensions: 20 1/8 inches height, 38 3/16 inches width, 48 7/16 inches depth, and 150,000 BTU rating.

This image illustrates the physical dimensions of the 150,000 BTU Reznor UDXC-150 unit heater, showing its height of 20 1/8 inches, width of 38 3/16 inches, and depth of 48 7/16 inches.

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For specific warranty information regarding your Reznor UDXC-150 unit heater, please refer to the documentation included with your purchase or contact the seller directly. Warranty terms typically cover manufacturing defects and may vary.

For technical support, service inquiries, or to purchase replacement parts, please contact 1HVAC, the distributor of this product. You can visit the 1HVAC Store ສໍາລັບຂໍ້ມູນເພີ່ມເຕີມ.

	Reznor Ceiling Suspension Kit ຄູ່ມືການຕິດຕັ້ງສໍາລັບເຄື່ອງເຮັດຄວາມຮ້ອນຫນ່ວຍບໍລິການໄຟຟ້າແລະອາຍແກັສ ຄຳແນະນຳໃນການຕິດຕັ້ງ ແລະ ລາຍລະອຽດຂອງສ່ວນປະກອບສຳລັບຊຸດຕິດຕັ້ງເພດານ Reznor CK22, ເຂົ້າກັນໄດ້ກັບເຄື່ອງເຮັດຄວາມຮ້ອນໄຟຟ້າ EHU ແລະ ເຄື່ອງເຮັດຄວາມຮ້ອນທີ່ໃຊ້ແກັສ UDXC, UDX, UDZ. ຮຽນຮູ້ວິທີການຕິດຕັ້ງເຄື່ອງເຮັດຄວາມຮ້ອນ Reznor ຂອງທ່ານຢ່າງປອດໄພ.
	ການຕິດຕັ້ງຊຸດແປງອາຍແກັສ Reznor ສໍາລັບເຄື່ອງເຮັດຄວາມຮ້ອນຫົວຫນ່ວຍທີ່ມີອາຍແກັສ ເອກະສານນີ້ໃຫ້ຄໍາແນະນໍາການຕິດຕັ້ງສໍາລັບຊຸດແປງອາຍແກັສ Reznor ສໍາລັບເຄື່ອງເຮັດຄວາມຮ້ອນຫົວຫນ່ວຍທີ່ມີອາຍແກັສຕ່າງໆ, ລວມທັງ UBX, UBXC, UBZ, UDX, UDXC, UDZ, UDAP, UDAS, UDBP, ແລະ UDBS. ມັນລາຍລະອຽດການຄັດເລືອກອົງປະກອບ, ລະມັດລະວັງຄວາມປອດໄພ, ແລະຂັ້ນຕອນການຕິດຕັ້ງສໍາລັບການປ່ຽນລະຫວ່າງອາຍແກັສທໍາມະຊາດແລະ propane, ເຊັ່ນດຽວກັນກັບການຕິດຕັ້ງສູງ.
	Reznor EHA Series ສະຖາປັດຕະຍະກຳເຄື່ອງເຮັດຄວາມຮ້ອນແບບຕິດຝາດ້ວຍໄຟຟ້າ ລາຍລະອຽດສະເພາະດ້ານເຕັກນິກຂອງ Reznor EHA Series ເຄື່ອງເຮັດຄວາມຮ້ອນແບບຕິດຝາດ້ວຍໄຟຟ້າແບບບັງຄັບໃຊ້ໃນອາຄານ ແລະທີ່ຢູ່ອາໄສ, ກວມເອົາຂະໜາດຫົວໜ່ວຍ, ຄຸນສົມບັດ, ທາງເລືອກໃນການຕິດຕັ້ງ, ຂໍ້ມູນດ້ານວິຊາການ, ຂະໜາດ ແລະຂໍ້ແນະນຳດ້ານຄວາມປອດໄພ.
	ການຕິດຕັ້ງຊຸດລະງັບເພດານ Reznor ສໍາລັບເຄື່ອງເຮັດຄວາມຮ້ອນດ້ວຍໄຟຟ້າ ແລະນໍ້າມັນເຊື້ອໄຟ (ທາງເລືອກ CK22) ຄູ່ມືການຕິດຕັ້ງສຳລັບຊຸດຕິດຕັ້ງເພດານ Reznor CK22, ອອກແບບມາສຳລັບເຄື່ອງເຮັດຄວາມຮ້ອນໄຟຟ້າ ແລະ ເຄື່ອງເຮັດຄວາມຮ້ອນທີ່ໃຊ້ແກັສ EHU, UDX, UDXC, ແລະ UDZ. ລວມມີອຸປະກອນຂອງຊຸດ ແລະ ຂັ້ນຕອນການຕິດຕັ້ງ.
	Reznor Vertical Louver Kit ຄູ່ມືການຕິດຕັ້ງສໍາລັບເຄື່ອງເຮັດຄວາມຮ້ອນຫົວຫນ່ວຍທີ່ມີອາຍແກັສ (OPT-CD1) ຄໍາແນະນໍາການຕິດຕັ້ງສໍາລັບຊຸດ Louver Reznor OPT-CD1 Vertical, ອອກແບບສໍາລັບເຄື່ອງເຮັດຄວາມຮ້ອນຂອງຫນ່ວຍງານທີ່ມີອາຍແກັສ (ແບບ UBX, UBXC, UBZ, UDX, UDXC, UDZ, UEZ). ປະກອບມີບັນຊີລາຍຊື່ອົງປະກອບແລະຄູ່ມືການປະກອບຂັ້ນຕອນໂດຍຂັ້ນຕອນ.
	Reznor EGHB Industrial Suspended Unit Heater: ຂໍ້ມູນຈໍາເພາະ, ຄຸນສົມບັດ, ແລະຄູ່ມືການຕິດຕັ້ງ ຂໍ້ມູນສະເພາະດ້ານເຕັກນິກ, ຄຸນສົມບັດ, ຂໍ້ແນະນຳໃນການຕິດຕັ້ງ ແລະຂໍ້ມູນຂະໜາດຂອງເຄື່ອງເຮັດຄວາມຮ້ອນໜ່ວຍໄຟຟ້າແບບລະງັບແບບອຸດສາຫະກຳ Reznor EGHB, ອອກແບບມາສຳລັບພື້ນທີ່ການຄ້າ ແລະອຸດສາຫະກຳ.

Reznor UDXC-150