XPG INVADER X MINI ATX Mid Tower PC Case Instruction Manual

ແນະນຳ

Welcome to the XPG INVADER X MINI ATX Mid Tower PC Case instruction manual. This guide provides detailed information on the installation, operation, and maintenance of your new PC case. The INVADER X MINI is designed for compact, stylish, and powerful gaming rig builds, offering impressive compatibility with ATX motherboards and optimal airflow with five pre-installed ARGB fans.

Please read this manual thoroughly before beginning assembly to ensure proper installation and safe operation.

ເນື້ອໃນຊຸດ

ກວດສອບວ່າອົງປະກອບທັງໝົດມີຢູ່ໃນຊຸດ:

• XPG INVADER X MINI PC Case
• ກ່ອງອຸປະກອນເສີມ (ສະກູ, ສາຍຮັດ, ຕົວຍຶດ, ແລະອື່ນໆ)
• ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)

ຂໍ້ຄວນລະວັງຄວາມປອດໄພ

• ສະເຫມີຕັດການເຊື່ອມຕໍ່ການສະຫນອງພະລັງງານຈາກເຕົ້າສຽບໃສ່ຝາກ່ອນທີ່ຈະຕິດຕັ້ງຫຼືເອົາອົງປະກອບໃດໆ.
• ຈັດການອົງປະກອບດ້ວຍຄວາມລະມັດລະວັງເພື່ອຫຼີກເວັ້ນການເສຍຫາຍ.
• ໃສ່ສາຍຮັດຂໍ້ມືປ້ອງກັນໄຟຟ້າສະຖິດເພື່ອປ້ອງກັນຄວາມເສຍຫາຍຈາກການປ່ອຍໄຟຟ້າສະຖິດ (ESD) ຕໍ່ອົງປະກອບທີ່ລະອຽດອ່ອນ.
• ເກັບຮັກສາຊິ້ນສ່ວນຂະໜາດນ້ອຍ ແລະ ສະກູໃຫ້ໄກຈາກເດັກນ້ອຍ.

ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

1. ການກະກຽມກໍລະນີ

Carefully remove the case from its packaging. Place it on a stable, flat surface. Remove the side panels by unscrewing the thumb screws at the rear of the case and sliding the panels off.

ຮູບພາບ: ດ້ານຫນ້າ view of the XPG INVADER X MINI PC case, showcasing its tempered glass panels and the vibrant ARGB fans. This view highlights the compact elegance and panoramic design.

2. ການຕິດຕັ້ງເມນບອດ

1. ຕິດຕັ້ງແຜ່ນປ້ອງກັນ I/O ເຂົ້າໄປໃນຊ່ອງເປີດຖາດເມນບອດຈາກດ້ານໃນຂອງເຄສ.
2. Align your ATX motherboard with the pre-installed standoffs. Ensure the screw holes on the motherboard match the standoffs.
3. Secure the motherboard using the provided screws.

ຮູບພາບ: ພາຍໃນ view of the PC case, illustrating the spacious motherboard tray and various mounting points for components. This image helps visualize the layout for component installation.

3. ການຕິດຕັ້ງຫນ່ວຍບໍລິການສະຫນອງພະລັງງານ (PSU).

The INVADER X MINI supports rear-mount power supplies. Slide your PSU into the designated compartment at the rear bottom of the case and secure it with screws from the outside.

Image: Rear internal view of the PC case, highlighting the power supply mounting area and cable routing channels behind the motherboard tray. This demonstrates the design for clean cable management.

4. ການຕິດຕັ້ງໄດຣຟ໌ເກັບຂໍ້ມູນ

Install 2.5" SSDs or 3.5" HDDs into the designated drive bays. Refer to the accessory box for specific mounting hardware.

ຮູບພາບ: ລາຍລະອຽດພາຍໃນ view of the PC case, focusing on the drive bays and fan mounting locations. This helps users identify where to install storage devices and additional cooling.

5. ການຕິດຕັ້ງກາດກຣາບຟິກ (GPU) ແລະກາດເສີມ

Remove the necessary PCIe slot covers from the rear of the case. Insert your graphics card or other expansion cards into the motherboard's PCIe slots and secure them with screws.

Image: Rear exterior view of the PC case, showing the PCIe expansion slots, the rear exhaust fan, and the I/O panel cutout. This view is crucial for installing expansion cards and connecting peripherals.

6. ການຄຸ້ມຄອງສາຍໄຟ

ໃຊ້ຈຸດຕັດສາຍໄຟ ແລະ ຈຸດມັດສາຍໄຟຢູ່ທາງຫຼັງຖາດເມນບອດເພື່ອຈັດການສາຍໄຟໃຫ້ເປັນລະບຽບ. ສິ່ງນີ້ຊ່ວຍປັບປຸງການໄຫຼວຽນຂອງອາກາດ ແລະ ຄວາມງາມ.

Image: Side internal view of the PC case, illustrating the pre-installed ARGB fans and the internal layout for component placement. This perspective helps in planning component installation and cable routing.

7. ການເຊື່ອມຕໍ່ I/O ຂອງແຜງດ້ານໜ້າ

Connect the front panel cables (USB, audio, power switch, reset switch, LED indicators) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

Image: Top-down internal view of the PC case, showing the top fan mounts and the overall internal structure. This view is useful for understanding top-mounted radiator or fan installations.

Operating the PC Case

ເປີດເຄື່ອງ

Once all components are installed and cables are connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable to the PC. Press the power button on the front panel of the case to turn on your system.

ການຄວບຄຸມພັດລົມ ARGB

The XPG INVADER X MINI comes with five pre-installed ARGB fans. These fans can be controlled via your motherboard's ARGB software (if compatible) or a dedicated ARGB controller (if included or purchased separately). Refer to your motherboard manual or ARGB controller instructions for specific lighting effects and synchronization.

ບໍາລຸງຮັກສາ

ການເຮັດຄວາມສະອາດການກັ່ນຕອງຂີ້ຝຸ່ນ

The case is equipped with dust filters to prevent dust buildup inside. Regularly clean these filters (typically located at the top, front, and bottom) by removing them and gently brushing or washing them with water. Ensure they are completely dry before re-installing.

ທໍາຄວາມສະອາດທົ່ວໄປ

ໃຊ້ອ່ອນ, ງamp cloth to wipe down the exterior of the case. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass panels.

ການແກ້ໄຂບັນຫາ

• ລະບົບບໍ່ເປີດ: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Check the power switch connection to the motherboard. Verify the PSU is switched on.
• ພັດລົມບໍ່ໝຸນ/ARGB ບໍ່ສະຫວ່າງ: Check fan power connections to the motherboard or fan controller. Ensure ARGB headers are correctly connected and software is configured.
• ບໍ່ມີການສະແດງຜົນອອກ: Confirm the graphics card is properly seated in its PCIe slot and has adequate power. Ensure the monitor cable is connected to the graphics card, not the motherboard's integrated graphics ports (unless using integrated graphics).
• ຄວາມຮ້ອນເກີນ: Verify all fans are spinning correctly and are oriented for optimal airflow (intake/exhaust). Ensure CPU cooler and GPU fans are functioning. Clean dust filters.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

XPG products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official XPG webເວັບໄຊ.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact XPG customer service through their official webເວັບໄຊທ໌ ຫຼື ຂໍ້ມູນຕິດຕໍ່ທີ່ສະໜອງໃຫ້ໃນເອກະສານຜະລິດຕະພັນຂອງທ່ານ.

Please have your product model number (INVADER X MINI) and serial number ready when contacting support.