ELEGRP Decorator Triple Rocker Switch Model 72611-BL Instruction Manual

1. ບົດແນະນຳ

Thank you for choosing the ELEGRP Decorator Triple Rocker Switch. This manual provides essential information for the safe installation, operation, and maintenance of your new switch. Please read these instructions thoroughly before beginning installation and retain them for future reference.

ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ

• ຄຳເຕືອນ: ຄວາມສ່ຽງຈາກໄຟຟ້າຊັອດ. Always turn off power at the circuit breaker or fuse box before installation, servicing, or removing the switch.
• Install in accordance with all national and local electrical codes. If you are unsure about any part of these instructions, consult a qualified electrician.
• ໃຊ້ພຽງແຕ່ດ້ວຍສາຍທອງແດງຫຼືສາຍທອງແດງ.
• ຢ່າໃຊ້ໃນສະຖານທີ່ທີ່ຊຸ່ມ.
• ໃຫ້ແນ່ໃຈວ່າການເຊື່ອມຕໍ່ສາຍໄຟທັງຫມົດແມ່ນປອດໄພ.

2. ຄຸນລັກສະນະຂອງຜະລິດຕະພັນ

The ELEGRP Decorator Triple Rocker Switch is designed for reliable performance and ease of use, offering control for three separate lighting loads from a single gang box.

• Rational Design: Features three smooth ON and OFF paddles with tactile feedback to prevent accidental operation.
• ການກໍ່ສ້າງຄຸນນະພາບສູງ: Made from impact-resistant polycarbonate thermoplastic and solid steel for extended durability.
• ຮາກຖານດ້ວຍຕົນເອງ: Includes a self-grounding clip for automatic connection in properly grounded metal wall boxes.
• ການ​ຕິດ​ຕັ້ງ​ງ່າຍ​ດາຍ​: Supports both back wiring and side wiring. Features break-off plaster ears for flush alignment and a shallow body design to fit standard junction boxes.
• UL ແລະ CUL ລະບຸໄວ້: Strictly tested to UL Standards for safety and quality assurance.

Figure 1: Key features of the ELEGRP Triple Rocker Switch, highlighting its durable construction and safety certifications.

3. ເນື້ອໃນຊຸດ

ກວດສອບວ່າອົງປະກອບທັງໝົດມີຢູ່ກ່ອນການຕິດຕັ້ງ:

• 1 x ELEGRP Decorator Triple Rocker Switch (Model 72611-BL)
• 1 x Matching Wall Plate (Screw Wall Plate, Glossy Black)
• screws ການຕິດຕັ້ງ

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Follow these steps carefully to install your ELEGRP Triple Rocker Switch.

ຂັ້ນຕອນການຕິດຕັ້ງກ່ອນ

1. ປິດໄຟ: Locate the circuit breaker or fuse that controls the switch location and turn off the power. Verify power is off using a voltage ເຄື່ອງທົດສອບ.
2. ເອົາປຸ່ມເກົ່າອອກ: ຄ່ອຍໆຖອດແຜ່ນຕິດຝາ ແລະ ສະວິດໄຟອອກຈາກກ່ອງຕິດຝາ. ຖອດສາຍໄຟອອກຈາກສະວິດໄຟເກົ່າ.
3. ກວດ​ສອບ​ສາຍ​ໄຟ​: Identify the hot (line), neutral, ground, and load wires. If you are unsure, consult a qualified electrician.

ຄໍາແນະນໍາສາຍໄຟ

The ELEGRP Triple Rocker Switch offers two wiring options: side wiring and back wiring.

Figure 2: Wiring options for the switch, illustrating connections for hot, neutral, and ground wires.

1. ສາຍດິນ: Connect the green or bare copper ground wire from the wall box to the green grounding screw on the switch.
2. ສາຍຮ້ອນ (ສາຍ): Connect the incoming hot (line) wire to the black screw terminal. This switch uses a common feed for all three loads.
3. ໂຫຼດສາຍ: Connect the three load wires (one for each light/fixture) to the three brass screw terminals.
4. ສາຍກາງ: The neutral wire typically bypasses the switch and connects directly to the loads. Ensure proper neutral connections for your fixtures.

ການຕິດຕັ້ງ Switch

1. Carefully fold the wires into the wall box, leaving enough space for the switch.
2. Insert the switch into the wall box and secure it with the provided mounting screws. Use the break-off plaster ears for flush alignment if needed.
3. Attach the included wall plate over the switch and secure it with the smaller screws.
4. ຟື້ນຟູພະລັງງານ: ເປີດໄຟຄືນຢູ່ທີ່ຕົວຕັດວົງຈອນ ຫຼືກ່ອງຟິວ.
5. ການ​ປະ​ຕິ​ບັດ​ການ​ທົດ​ສອບ​: Test each rocker paddle to ensure proper ON/OFF functionality for its respective load.

Figure 3: Compact design and dimensions of the switch, ensuring compatibility with standard wall boxes.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

The ELEGRP Decorator Triple Rocker Switch provides simple control for three independent lighting or appliance loads.

• Each of the three paddles operates independently.
• To turn a connected load ON, press the upper part of the corresponding paddle.
• To turn a connected load OFF, press the lower part of the corresponding paddle.

Figure 4: The triple rocker switch allows control of three separate loads from a single wall box, optimizing space.

6. ບໍາລຸງຮັກສາ

The ELEGRP Triple Rocker Switch requires minimal maintenance.

• ທໍາຄວາມສະອາດ: To clean the switch and wall plate, wipe with a soft, damp ຜ້າ. ຢ່າໃຊ້ນໍ້າຢາທໍາຄວາມສະອາດທີ່ມີສີຂັດ ຫຼື ຕົວລະລາຍ, ເພາະວ່າສິ່ງເຫຼົ່ານີ້ອາດຈະທໍາລາຍສີຜິວໄດ້.
• ການກວດກາ: Periodically check the switch and wall plate for any signs of damage or loose connections. If any issues are found, turn off power at the circuit breaker and address them promptly.

7. ການແກ້ໄຂບັນຫາ

If you experience issues with your ELEGRP Triple Rocker Switch, refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, contact ELEGRP customer support or a qualified electrician.

8. ຂໍ້ມູນຈໍາເພາະ

9. ຂໍ້ມູນການຮັບປະກັນ

ELEGRP products are manufactured to high-quality standards and are backed by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ELEGRP webເວັບໄຊ.

10. ສະຫນັບສະຫນູນ

For technical assistance, product inquiries, or warranty claims, please contact ELEGRP customer support through the following channels:

• ອອນລາຍ: ຢ້ຽມຢາມຢ່າງເປັນທາງການ ELEGRP Brand Store on Amazon.
• ອີເມວ: Refer to your product packaging or the brand store for specific contact email.