AIYIMA 2-inch 8ohm 5W Full Range Mini Woofer Speaker

ຄູ່ມືການນຳໃຊ້ລຳໂພງວູບເຟີຂະໜາດນ້ອຍ AIYIMA ຂະໜາດ 2 ນິ້ວ 8ohm 5W Full Range

Model: 2-inch 8ohm 5W Full Range Mini Woofer Speaker

ຍີ່ຫໍ້: AIYIMA

1. ບົດແນະນຳ

This instruction manual provides essential information for the proper installation, operation, and maintenance of your AIYIMA 2-inch 8ohm 5W Full Range Mini Woofer Speaker. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product. Retain this manual for future reference.

2. ຜະລິດຕະພັນເກີນview

2.1 ຄຸນສົມບັດ

  • Compact 2-inch full-range design for versatile audio applications.
  • Rated at 5W power output with 8 Ohm impedance.
  • Designed for easy installation with appropriate accessories.
  • ການກໍ່ສ້າງທີ່ທົນທານເພື່ອການປະຕິບັດທີ່ໜ້າເຊື່ອຖື.

2.2 ເນື້ອໃນຊຸດ

  • 2 x AIYIMA 2-inch 8ohm 5W Full Range Mini Woofer Speakers
Two AIYIMA 2-inch 8ohm 5W Full Range Mini Woofer Speakers, showing front and rear views.

ຮູບ 1: ດ້ານຫນ້າແລະຫລັງ view of the AIYIMA 2-inch 8ohm 5W Full Range Mini Woofer Speakers.

3. ຂໍ້ມູນຈໍາເພາະ

ພາລາມິເຕີມູນຄ່າ
ປະເພດລຳໂພງFull Range Mini Woofer
ເສັ້ນຜ່າສູນກາງ52 ມມ (2 ນີ້ວ)
ຄວາມສູງ30 ມມ
impedance8 ໂອມ
ລະດັບພະລັງງານ5 ວ
Screw Hole Diagonal Dimension60 ມມ
ເສັ້ນຜ່າສູນກາງແມ່ເຫຼັກ45 ມມ
ນ້ຳໜັກຜະລິດຕະພັນ (ແຕ່ລະອັນ)Approx. 25 g (Total 50 g for 2 speakers)
ປະເພດການຕິດຕັ້ງFlush Mount
Dimensional drawing of the AIYIMA 2-inch speaker, showing measurements for diameter, height, and screw hole spacing.

Figure 2: Detailed dimensions of the speaker for installation planning.

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Follow these steps for proper installation of your speakers:

  1. ການກະກຽມ: ຮັບປະກັນສຽງຂອງເຈົ້າ amplifier or source is turned off and disconnected from power before beginning installation. Gather necessary tools such as a screwdriver, wire strippers, and mounting hardware (not included unless specified).
  2. ສະຖານທີ່ຕິດຕັ້ງ: Choose a suitable location for mounting the speakers. Refer to Figure 2 for speaker dimensions to ensure proper fit. The speakers are designed for flush mounting.
  3. ສາຍໄຟ:
    • Identify the positive (+) and negative (-) terminals on the back of each speaker. These are typically marked.
    • ເຊື່ອມຕໍ່ຂົ້ວບວກ (+) ຂອງລໍາໂພງກັບຜົນຜະລິດ (+) ບວກຂອງທ່ານ ampມີຊີວິດຊີວາ.
    • ເຊື່ອມຕໍ່ຂົ້ວລົບ (-) terminal ຂອງລໍາໂພງກັບຜົນຜະລິດ (-) ລົບຂອງທ່ານ ampມີຊີວິດຊີວາ.
    • ຮັບປະກັນການເຊື່ອມຕໍ່ທັງໝົດແມ່ນປອດໄພ ແລະບໍ່ມີວົງຈອນສັ້ນ.
  4. ການ​ຮັບ​ປະ​ກັນ​ລໍາ​ໂພງ​: Use appropriate screws (not included) to secure the speakers into their mounting holes. The screw hole diagonal dimension is 60 mm. Do not overtighten screws, as this may damage the speaker frame.
  5. ກວດສອບຄັ້ງສຸດທ້າຍ: Double-check all connections and mounting security before proceeding to operation.
ຂ້າງ view of an AIYIMA 2-inch speaker, highlighting the positive and negative terminals for wiring.

ຮູບ 3: ດ້ານຫລັງ view of the speaker showing wiring terminals.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

Once the speakers are properly installed and wired:

  1. Connect your audio amplifier or source to power.
  2. ເປີດຂອງທ່ານ amplifier ແລະແຫຼ່ງສຽງ.
  3. Start playing audio at a low volume level.
  4. ຄ່ອຍໆເພີ່ມລະດັບສຽງໃຫ້ກັບລະດັບການຟັງທີ່ທ່ານຕ້ອງການ. ຫຼີກເວັ້ນປະລິມານທີ່ສູງເກີນໄປທີ່ອາດຈະເຮັດໃຫ້ເກີດການບິດເບືອນຫຼືຄວາມເສຍຫາຍຕໍ່ລໍາໂພງ.

6. ບໍາລຸງຮັກສາ

ເພື່ອຮັບປະກັນອາຍຸການໃຊ້ງານທີ່ຍາວນານ ແລະ ປະສິດທິພາບທີ່ດີທີ່ສຸດຂອງລຳໂພງຂອງທ່ານ, ໃຫ້ປະຕິບັດຕາມຄຳແນະນຳກ່ຽວກັບການບຳລຸງຮັກສາເຫຼົ່ານີ້:

  • ທໍາຄວາມສະອາດ: Gently wipe the speaker cones and frames with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • ສະພາບແວດລ້ອມ: Avoid exposing the speakers to extreme temperatures, direct sunlight, high humidity, or moisture.
  • ຄວາມເສຍຫາຍທາງກາຍ: Protect the speaker cones from punctures or tears. Avoid placing heavy objects on the speakers.
  • ສາຍໄຟ: Periodically check wiring connections for looseness or corrosion. Re-secure or clean as necessary.

7. ການແກ້ໄຂບັນຫາ

ຖ້າທ່ານພົບບັນຫາກັບລໍາໂພງຂອງທ່ານ, ອ້າງອີງເຖິງບັນຫາທົ່ວໄປຕໍ່ໄປນີ້ແລະວິທີແກ້ໄຂ:

ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
ບໍ່ມີສຽງຈາກ ລຳ ໂພງ
  • ສາຍໄຟບໍ່ຖືກຕ້ອງ
  • Amplifier/audio source off or muted
  • ປະລິມານຕໍ່າເກີນໄປ
  • ສາຍລຳໂພງເສຍຫາຍ
  • Check all wiring connections (positive to positive, negative to negative).
  • ຮັບປະກັນ amplifier and audio source are powered on and not muted.
  • ເພີ່ມປະລິມານຄ່ອຍໆ.
  • Inspect speaker wires for breaks or shorts; replace if damaged.
ສຽງບິດເບືອນຫຼືບໍ່ຊັດເຈນ
  • ປະລິມານສູງເກີນໄປ
  • ການເຊື່ອມຕໍ່ສາຍໄຟວ່າງ
  • Improper impedance match (less likely for passive speakers)
  • ໂກນລຳໂພງເສຍຫາຍ
  • ຫຼຸດປະລິມານລົງ.
  • ກວດເບິ່ງ ແລະຮັບປະກັນການເຊື່ອມຕໍ່ສາຍໄຟທັງໝົດ.
  • ຮັບປະກັນ amplifier output impedance is compatible with 8 Ohm speakers.
  • Inspect speaker cone for visible damage. If damaged, speaker may need replacement.
ມີລຳໂພງພຽງໂຕດຽວເທົ່ານັ້ນທີ່ເຮັດວຽກ
  • Wiring issue on the non-working speaker
  • ລໍາໂພງຜິດພາດ
  • Amplifier channel issue
  • ກວດສອບສາຍໄຟສຳລັບລຳໂພງທີ່ບໍ່ເຮັດວຽກ.
  • Swap speakers to determine if the issue follows the speaker or the ampຊ່ອງ lifier.
  • ປຶກສາ amplifier manual if an amplifier channel is suspected.

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the documentation provided at the point of purchase or contact your retailer. Specific warranty terms may vary by region and seller.