1. ບົດແນະນຳ
This manual provides instructions for the proper use and maintenance of the Dasqua 7 Piece 0-16-Inch Electronic Depth Gage Set, model 4710-1205. This electronic depth gage is designed for precise depth measurements in various industrial and scientific applications. It features a digital display for clear readings and is constructed for durability and accuracy.
Image 1.1: The Dasqua 7 Piece 0-16-Inch Electronic Depth Gage Set, showing the main unit and various measurement rods.
2. ເນື້ອໃນຊຸດ
ກວດສອບວ່າອົງປະກອບທັງໝົດມີຢູ່ໃນຊຸດ:
- Electronic Depth Gage Unit
- Set of Measurement Rods (7 pieces)
- ຕູ້ເກັບມ້ຽນ
- ຈົດໝາຍຮັບປະກັນ
Image 2.1: The complete Dasqua Electronic Depth Gage Set, including the main unit, measurement rods, and storage case.
3. ຄຸນນະສົມບັດທີ່ສໍາຄັນ
- ຄວາມລະອຽດ: 0.0005-inch / 0.01mm for precise measurements.
- ການປະຕິບັດຕາມມາດຕະຖານ: Manufactured in accordance with DIN863 standards.
- Spindle: Hardened, ground, and lapped for enhanced accuracy.
- ຄວາມຄ່ອງແຄ້ວ: Designed to accommodate a broad range of measurement applications.
- ຈໍສະແດງຜົນ: Large, digital display for clear and quick readings.
- ການກໍ່ສ້າງ: Hardened stainless steel base and rods resist wear, ensuring durability and consistent accuracy.
- ຣີເຊັດສູນ: Ability to reset to zero at any position for comparative depth measurements.
4. ຄໍາແນະນໍາການຕິດຕັ້ງ
4.1. ການຕິດຕັ້ງຫມໍ້ໄຟ
The electronic depth gage typically uses a CR2032 lithium coin cell battery. To install or replace the battery:
- Locate the battery compartment cover on the back of the digital display unit.
- Use a small screwdriver or coin to open the cover.
- ໃສ່ແບັດ CR2032 ໃໝ່ ໂດຍໃຫ້ດ້ານບວກ (+) ຫັນໜ້າຂຶ້ນ.
- ປ່ຽນຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟໃຫ້ປອດໄພ.
4.2. Attaching Measurement Rods
Select the appropriate measurement rod for the desired depth range. The set includes rods of various lengths.
- Identify the threaded end of the measurement rod.
- Carefully screw the rod into the threaded hole at the bottom of the depth gage's base until it is finger-tight. Do not overtighten.
- Ensure the rod is securely attached and straight.
Image 4.1: The electronic depth gage with a measurement rod properly attached to its base.
Image 4.2: A selection of the hardened stainless steel measurement rods provided with the depth gage set.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
5.1. ເປີດ/ປິດ
- ກົດ ເປີດ/ປິດ ປຸ່ມເພື່ອເປີດອຸປະກອນ.
- ກົດ ເປີດ/ປິດ button again to power off the device.
5.2. Unit Conversion (Inch/Millimeter)
- ກົດ mm/in button to switch between millimeter (mm) and inch (in) units. The selected unit will be displayed on the screen.
5.3. Zero Setting
The zero-reset function allows for comparative measurements or setting a reference point.
- Place the depth gage on a flat, stable reference surface, ensuring the measurement rod is fully retracted or resting on the surface.
- ກົດ ZERO ປຸ່ມ. ໜ້າຈໍຈະສະແດງ '0.000' ຫຼື '0.00'.
5.4. ການວັດແທກ
- Ensure the depth gage is zeroed on a reference surface.
- Place the base of the depth gage firmly on the surface from which the depth is to be measured.
- Lower the measurement rod into the hole or recess until its tip contacts the bottom.
- Read the measurement directly from the digital display.
5.5. ຟັງຊັນຄ້າງໄວ້
- ກົດ ຖື ເພື່ອຢຸດການອ່ານປັດຈຸບັນຢູ່ເທິງໜ້າຈໍ.
- ກົດ ຖື button again to release the reading and return to live measurement.
ຮູບພາບ 5.1: ລາຍລະອຽດ view of the digital display, showing the ON/OFF, mm/in, HOLD, and ZERO buttons.
6. ບໍາລຸງຮັກສາ
6.1. ທໍາຄວາມສະອາດ
- Wipe the depth gage and rods with a clean, dry, lint-free cloth after each use.
- ສໍາລັບຝຸ່ນທີ່ແຂງ, ໃຊ້ຜ້າບາງໆ dampened with isopropyl alcohol. Avoid harsh chemicals or solvents.
- Ensure no liquid enters the electronic components.
6.2. ການເກັບຮັກສາ
- Store the depth gage in its protective case when not in use.
- ເກັບຮັກສາອຸປະກອນໄວ້ໃນສະພາບແວດລ້ອມແຫ້ງ, ຫ່າງຈາກແສງແດດໂດຍກົງ, ອຸນຫະພູມສຸດຂີດ ແລະ ຄວາມຊຸ່ມຊື່ນສູງ.
- ຖ້າເກັບຮັກສາໄວ້ເປັນເວລາດົນ, ໃຫ້ຖອດແບັດເຕີຣີອອກເພື່ອປ້ອງກັນການຮົ່ວໄຫຼ.
6.3. ການທົດແທນຫມໍ້ໄຟ
Replace the battery when the display becomes dim or erratic. Refer to Section 4.1 for battery installation instructions.
7. ການແກ້ໄຂບັນຫາ
- ຈໍສະແດງຜົນຫວ່າງເປົ່າ ຫຼືມືດ:
Check battery installation. Replace the battery if necessary. Ensure the device is powered on. - ການອ່ານບໍ່ຖືກຕ້ອງ:
Ensure the depth gage is properly zeroed on a flat reference surface. Clean the measurement rod and base to remove any debris. Verify the measurement rod is securely attached. - ປຸ່ມບໍ່ຕອບສະໜອງ:
ກວດເບິ່ງລະດັບຫມໍ້ໄຟ. ຖ້າບັນຫາຍັງຄົງຢູ່ຫຼັງຈາກການປ່ຽນແບັດ, ໃຫ້ຕິດຕໍ່ຝ່າຍຊ່ວຍເຫຼືອລູກຄ້າ.
8. ຂໍ້ມູນຈໍາເພາະຂອງຜະລິດຕະພັນ
| ຂໍ້ມູນຈໍາເພາະ | ລາຍລະອຽດ |
|---|---|
| ໝາຍເລກຕົວແບບ | 4710-1205 |
| ໄລຍະການວັດແທກ | 0-16 ນິ້ວ / 0-400mm |
| ຄວາມລະອຽດ | 0.0005 ນິ້ວ / 0.01mm |
| ຄວາມຖືກຕ້ອງ | 0.0015 ນິ້ວ / 0.03mm |
| ວັດສະດຸ | ເຫຼັກສະແຕນເລດແຂງ |
| ແຫຼ່ງພະລັງງານ | CR2032 Battery (typical) |
| ຂະໜາດແພັກເກັດ | 9 x 5 x 2 ນິ້ວ |
| ນ້ໍາຫນັກລາຍການ | 12.8 ອອນ |
Image 8.1: Detailed specifications and dimensional diagram for the Dasqua 0-16 inch Electronic Depth Gage Set.
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
This product is supplied with a warranty letter. For specific warranty terms and conditions, please refer to the documentation included in your package. For technical support, service, or inquiries regarding your Dasqua 4710-1205 Electronic Depth Gage Set, please contact the manufacturer directly through their official webເວັບໄຊ ຫຼືຊ່ອງທາງການບໍລິການລູກຄ້າ.
