AMIR Wireless Indoor Outdoor Thermometer with 3 Remote Sensors

ແນະນຳ

This manual provides detailed instructions for the setup, operation, and maintenance of your AMIR Wireless Indoor Outdoor Thermometer with 3 Remote Sensors. This device is designed to monitor temperature and humidity in various indoor and outdoor environments, providing accurate data for your home, office, or other spaces.

ແມ່ນຫຍັງຢູ່ໃນກ່ອງ

• 1 x Main Display Unit (Thermometer)
• 3 x ເຊັນເຊີໄລຍະໄກໄຮ້ສາຍ
• ປື້ມຄູ່ມືປະຕິບັດງານ 1 x

ໝາຍເຫດ: 3 AAA batteries are required for the main unit and 2 AAA batteries for each sensor (not included).

ສິນຄ້າເກີນview

The AMIR Wireless Indoor Outdoor Thermometer system consists of a main display unit and three remote sensors. The main unit displays indoor temperature and humidity, along with readings from the three remote sensors. The remote sensors transmit data wirelessly to the main unit.

ໜ່ວຍສະແດງຫຼັກ

Image: The main display unit showing temperature and humidity readings, alongside three remote sensors.

• ຈໍ LCD ຂະ​ຫນາດ​ໃຫຍ່​: Shows indoor temperature/humidity and data from up to 3 remote sensors simultaneously.
• ຟັງຊັນ Backlight: For clear visibility in low-light conditions.
• ປຸ່ມ: MIN/MAX, LIGHT, CHANNEL.
• ຕົວເລືອກການຕິດຕັ້ງ: Integrated stand for tabletop use and a hang hole for wall mounting.

ເຊັນເຊີຫ່າງໄກສອກຫຼີກ

Image: The main display unit and one remote sensor, illustrating their compact dimensions.

• ລະບົບສາຍສົ່ງໄຮ້ສາຍ: Sends temperature and humidity data to the main unit.
• ການອອກແບບກະທັດຮັດ: Suitable for various placements.
• ການຕິດຕັ້ງ: Hang hole for easy placement.

ຕັ້ງຄ່າ

1. ການຕິດຕັ້ງຫມໍ້ໄຟ

Ensure you have 3 AAA batteries for the main unit and 2 AAA batteries for each remote sensor (not included).

1. ໜ່ວຍສະແດງຫຼັກ: Open the battery compartment on the back of the main unit. Insert 3 AAA batteries, observing the correct polarity (+/-). Close the compartment.
2. ເຊັນເຊີໄລຍະໄກ: Open the battery compartment on the back of each remote sensor. Insert 2 AAA batteries into each sensor, observing the correct polarity (+/-). Close the compartment.

Image: Illustration of battery compartment and battery insertion for both the main unit and remote sensors.

2. ການຊິ້ງຂໍ້ມູນເບື້ອງຕົ້ນ

After installing batteries, the main unit will automatically search for signals from the remote sensors. This process may take a few minutes. Ensure all sensors are within range of the main unit during initial setup.

• The main unit will display indoor temperature and humidity, along with readings from the connected sensors (Channel 1, 2, 3).
• If a sensor does not connect, try pressing the "CHANNEL" button on the main unit to cycle through channels or re-insert the batteries in the sensor.

3. ບັນຈຸເຂົ້າຮຽນ

Place the main unit and remote sensors in desired locations. The wireless transmission range is approximately 100 meters (328 feet) in open air. Walls and other obstructions may reduce this range.

• ຫົວໜ່ວຍຫຼັກ: Can be placed on a tabletop using its integrated stand or mounted on a wall using the hang hole.
• ເຊັນເຊີໄລຍະໄກ: Can be placed outdoors, in a baby room, wine cellar, greenhouse, or any other area where you wish to monitor conditions. Use the hang hole for wall mounting or place on a flat surface.

ຮູບພາບ: Examples of wall-mount and tabletop placement for the main unit and a remote sensor.

ຄໍາແນະນໍາການດໍາເນີນງານ

1. Temperature Unit Selection (℃/℉)

Press the "℃/℉" button on the main unit to switch between Celsius and Fahrenheit temperature display.

2. Max/Min Record Function

The device records the maximum and minimum temperature and humidity values for the main unit and each sensor.

• View ສູງສຸດ/ນາທີ: In normal display mode, press the "MIN/MAX" button once to display the maximum indoor/outdoor temperature and humidity. The screen will show "MAX". Press again to display the minimum indoor/outdoor temperature and humidity. The screen will show "MIN".
• Clear Max/Min: To manually clear today's maximum/minimum values, press and hold the "MIN/MAX" button for approximately 5 seconds while viewການບັນທຶກ MAX ຫຼື MIN.
• ປັບອັດຕະໂນມັດ: The unit may also have an automatic 24-hour reset for MIN/MAX values. To switch between 24-hour reset and all-time (manual reset) modes, hold down the MIN/MAX button for ~5 seconds when the display shows current data (not MAX or MIN). A "24hr" badge will indicate the 24-hour mode.

Image: A graphical representation of how maximum and minimum temperature and humidity values are recorded.

3. ຟັງຊັນ Backlight

Press the "LIGHT" button on the main unit to activate the backlight. The backlight will automatically turn off after 5 seconds to conserve battery power.

Image: A close-up showing the "LIGHT" button on the main display unit.

4. ຕົວຊີ້ບອກລະດັບຄວາມສະດວກສະບາຍ

The main unit displays a smiley icon to indicate the comfort level based on humidity:

• ແຫ້ງ: ຄວາມຊຸ່ມຊື່ນ < 45%
• COM (Comfortable): 45% ≤ ຄວາມຊຸ່ມຊື່ນ ≤ 65%
• ຊຸ່ມ: ຄວາມຊຸ່ມຊື່ນ > 65%

Image: Visual guide to the comfort level icons displayed on the main unit, correlating humidity percentages with "Dry," "Comfortable," and "Wet" conditions.

ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: Wipe the main unit and sensors clean with a soft, damp cloth. Do not use abrasive cleaners or immerse the devices in water.
• ການປ່ຽນແບັດເຕີຣີ: When a low battery icon appears on the main unit for a specific sensor, it indicates that the batteries in that remote sensor need to be replaced. Replace all batteries in the sensor with new AAA batteries to ensure optimal performance.
• ການເກັບຮັກສາ: ຖ້າເກັບຮັກສາອຸປະກອນໄວ້ເປັນເວລາດົນ, ເອົາແບັດເຕີລີທັງໝົດອອກເພື່ອປ້ອງກັນການຮົ່ວໄຫຼ.

ການແກ້ໄຂບັນຫາ

ຂໍ້ມູນຈໍາເພາະ

• ໝາຍເລກຕົວແບບ: US-WA54
• ຊ່ວງອຸນຫະພູມພາຍໃນ: 0℃ - 60℃ (32℉ - 140℉)
• ຊ່ວງອຸນຫະພູມກາງແຈ້ງ: -40℃ - 60℃ (-40℉ - 140℉)
• ລະດັບຄວາມຊຸ່ມ: 10% - 99% ຄວາມຊຸ່ມຊື່ນ
• ຄວາມຖືກຕ້ອງຂອງອຸນຫະພູມ: ±1℃ (±1.8℉)
• ຄວາມຖືກຕ້ອງຂອງຄວາມຊຸ່ມຊື່ນ: ±5% RH
• ໄລຍະການສົ່ງຜ່ານໄຮ້ສາຍ: 100 ແມັດ / 328 ຟຸດ (ກາງແຈ້ງ)
• Data Update Rate: ທຸກໆ 60 ວິນາທີ
• ພະລັງງານຫົວຫນ່ວຍ: 3 x ຫມໍ້ໄຟ AAA (ບໍ່ລວມ)
• ພະລັງງານເຊັນເຊີ: ແບັດເຕີຣີ AAA 2 ກ້ອນຕໍ່ເຊັນເຊີ (ບໍ່ລວມ)
• ປະເພດການສະແດງ: LCD ດິຈິຕອນທີ່ມີ Backlight
• ວັດສະດຸ: Acrylonitrile Butadiene Styrene (ABS)
• ຂະໜາດຜະລິດຕະພັນ: Main Unit: Approximately 95mm (3.74in) Width x 78mm (3.07in) Height x 20mm (0.79in) Depth; Remote Sensor: Approximately 53mm (2.09in) Width
• ຄຸນນະສົມບັດພິເສດ: Fast Reading System, High Accuracy, Large Display, Low Battery Indicator, Ultra Clear Screen

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

AMIR products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official AMIR webເວັບໄຊ. ກະ​ລຸ​ນາ​ເກັບ​ຮັກ​ສາ​ໃບ​ຮັບ​ການ​ຊື້​ຂອງ​ທ່ານ​ສໍາ​ລັບ​ການ​ຮຽກ​ຮ້ອງ​ການ​ຮັບ​ປະ​ກັນ​.