ແນະນຳ
Thank you for choosing the Feit Electric 2ft LED T8 Linear Tube Light. This manual provides important information regarding the installation, operation, and maintenance of your new LED tube lights. These 10-watt (20-watt equivalent) direct replacement (Type A) non-dimmable linear LED tubes are designed to replace F17T8, T8, F20T12, or T12 fluorescent and LED tubes. They are engineered for quick and easy plug-and-play installation with most existing magnetic and electronic ballasts, requiring no rewiring. Each tube delivers 800 lumens of 4000K Cool White light, offering significant energy savings and a long lifespan of up to 50,000 hours.
ຂໍ້ມູນຄວາມປອດໄພ
Please read and understand all safety instructions before installation or use. Failure to do so may result in electric shock, fire, or other injuries.
- ຄຳເຕືອນ: Risk of shock. Disconnect power at the source before installation, inspection, or removal.
- Do not install this product in a pre-heat luminaire with non-shunted bi-pin lamp ຜູ້ຖື.
- ນີ້ lamp operates only on electronic or magnetic ballasts. If the lamp does not light when installed in the luminaire, remove the lamp ຈາກໂຄມໄຟແລະຕິດຕໍ່ຫາ lamp ຜູ້ຜະລິດຫຼືຊ່າງໄຟຟ້າທີ່ມີຄຸນວຸດທິ.
- ອຸປະກອນນີ້ບໍ່ໄດ້ມີຈຸດປະສົງເພື່ອໃຊ້ກັບທາງອອກສຸກເສີນ.
- ຫ້າມໃຊ້ຮ່ວມກັບເຄື່ອງหรี่ไฟ. ຜະລິດຕະພັນນີ້ບໍ່ສາມາດหรี่ไฟໄດ້.
- ຢ່າເບິ່ງໂດຍກົງຢູ່ໃນທໍ່ LED ປະຕິບັດງານ.
- ຮັບປະກັນວ່າອຸປະກອນມີຮາກຖານຢ່າງຖືກຕ້ອງ.
- Do not modify the tube or its components.
- ເຫມາະສໍາລັບ damp ສະຖານທີ່.
- Mercury-free and shatter-resistant coating for safe disposal.
ສິນຄ້າເກີນview
The Feit Electric LED T8 Linear Tube Light is designed for efficient and long-lasting illumination. It features a G13 base for easy plug-and-play installation into compatible fixtures.
Image: A pack of twelve Feit Electric 2ft LED T8 Linear Tube Lights, showcasing their uniform design and quantity.
Image: A detailed diagram illustrating the 2ft length and 1-inch diameter of the LED tube, along with key specifications such as 800 lumens brightness, 4000K Cool White light color, 50,000 hours life, 10 watts power consumption, and G13 base code.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ:
- ປະສິດທິພາບພະລັງງານ: 10W power consumption, equivalent to 20W fluorescent tubes.
- ຄວາມສະຫວ່າງສົດໃສ: 800 lumens of light output.
- ແສງສີຂາວເຢັນ: 4000K color temperature for a balanced, neutral white light.
- ອາຍຸຍືນ: ເຖິງ 50,000 ຊົ່ວໂມງຂອງການດໍາເນີນງານ.
- Direct Replacement (Type A): Works with most existing magnetic and electronic ballasts.
- ໃນທັນທີ: No warm-up time, flicker-free illumination.
- ປອດໄພ: Mercury-free with a shatter-resistant coating.
ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
These LED tubes are designed for simple plug-and-play installation into existing fluorescent fixtures with compatible ballasts. No rewiring is necessary.
- ຂັ້ນຕອນທີ 1: ຕັດການເຊື່ອມຕໍ່ໄຟ. Before beginning installation, ensure the power to the fixture is turned off at the circuit breaker or fuse box. This is a critical safety step.
- Step 2: Remove Existing Fluorescent Tubes. Carefully remove the old fluorescent tubes from the fixture. Allow them to cool if they have been recently in use.
- Step 3: Insert LED Tube. Align the G13 pins of the Feit Electric LED tube with the lamp holders in the fixture. Gently push and twist the tube until it is securely seated. Ensure both ends are properly connected.
- ຂັ້ນຕອນທີ 4: ການຟື້ນຟູພະລັງງານ. Once all LED tubes are securely installed, restore power to the fixture from the circuit breaker or fuse box.
- Step 5: Verify Operation. Turn on the light switch to confirm the LED tubes illuminate instantly and without flickering.
Image: A close-up of hands installing a Feit Electric LED tube light into a ceiling fixture, demonstrating the quick and easy direct replacement process.
Image: An illuminated Feit Electric LED tube light, showcasing its 4000K Cool White light output in a typical setting.
Image: A garage setting with a Feit Electric LED tube light installed, demonstrating its instant full brightness and lack of flickering or strobing.
ຫມາຍເຫດ: ຖ້າ lamp does not light when installed, remove it and contact Feit Electric customer support.
ຄໍາແນະນໍາການດໍາເນີນງານ
Once installed, the Feit Electric LED T8 Linear Tube Light operates like a standard fluorescent tube. Simply use the existing light switch to turn the light on or off. The LED tube will provide instant, full brightness without any warm-up time or flickering.
- ເປີດ/ປິດ ການດໍາເນີນງານ: Use the wall switch connected to the fixture to control the light.
- ບໍ່ສາມາດ Dimmable: This product is not compatible with dimmers. Attempting to use it with a dimmer may damage the tube or the ballast.
- ປະສິດທິພາບທີ່ດີທີ່ສຸດ: Designed for general illumination in offices, garages, workspaces, warehouses, and similar environments.
ບໍາລຸງຮັກສາ
The Feit Electric LED T8 Linear Tube Light requires minimal maintenance due to its long lifespan and durable construction.
- ທໍາຄວາມສະອາດ: Ensure the power is off before cleaning. Wipe the tube with a soft, dry, or slightly damp ຜ້າ. ຢ່າໃຊ້ສານເຄມີທີ່ຮຸນແຮງຫຼືເຄື່ອງເຮັດຄວາມສະອາດຂັດ.
- ການທົດແທນ: With a 50,000-hour lifespan, frequent replacement is not necessary. When replacement is required, follow the installation steps in reverse.
- ການຖິ້ມຂີ້ເຫຍື້ອ: These tubes are mercury-free and can be disposed of safely according to local regulations.
ການແກ້ໄຂບັນຫາ
If you encounter issues with your Feit Electric LED T8 Linear Tube Light, refer to the following common problems and solutions:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ແສງບໍ່ໄດ້ເປີດ. |
|
|
| ໄຟກະພິບ ຫຼື ໄຟສະໂຕຣບ. |
|
|
| ແສງສະຫວ່າງອ່ອນໆ. |
|
|
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນລັກສະນະ | ມູນຄ່າ |
|---|---|
| ໝາຍເລກຕົວແບບ | T24/840/LEDG2/RP/12 |
| ປະເພດແສງສະຫວ່າງ | LED |
| ວັດtage | 10 ວັດ (20W ທຽບເທົ່າ) |
| ສະບັບtage | 120 ໂວນ |
| ຄວາມສະຫວ່າງ | 800 Lumens |
| ອຸນຫະພູມສີ | ສີຂາວ 4000K |
| ຂະໜາດຮູບຮ່າງຂອງດອກໄຟ | T8 |
| Bulb Base | G13 |
| ຊີວິດສະເລ່ຍ | 50,000 ຊົ່ວໂມງ |
| ຄຸນນະສົມບັດພິເສດ | Energy Efficient, Flicker-Free, Frosted, Long Lasting |
| ຄວາມເຂົ້າກັນໄດ້ | Most Magnetic/Electronic Ballasts (Type A) |
| ຂະໜາດ | 2ft Length (approx. 1" diameter) |
| ວັດສະດຸ | ແກ້ວ |
| ການນຳໃຊ້ພາຍໃນ/ນອກ | ພາຍໃນ |
ຮັບປະກັນ
Feit Electric ສະໜອງ ກ ຮັບປະກັນ 1 ປີ on this product from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Feit Electric customer support.
ການຊ່ວຍເຫຼືອລູກຄ້າ
For 24/7 customer support, technical assistance, or warranty inquiries, please visit the Feit Electric help center or contact us directly:
- ສູນຊ່ວຍເຫຼືອອອນໄລນ໌: help.feit.com
- ໂທລະສັບ: ອ້າງອີງເຖິງ Feit Electric webເວັບໄຊສຳລັບເບີໂທຕິດຕໍ່ປັດຈຸບັນ.
Image: A visual representation of Feit Electric's 24/7 customer support, directing users to their online help center at feit.com/help via text and a QR code.
