1. ຜະລິດຕະພັນເກີນview
This manual provides instructions for the installation and maintenance of the YITAMOTOR Fender Flares Kit. These fender flares are designed to provide additional tire coverage and protection for your vehicle's wheel wells.
The fender flares are constructed from high-quality polypropylene (PP) material, engineered for durability and resistance to deformation, shrinkage, and cracking, even in various climates. They feature a smooth black finish and are UV-resistant. The flares can also be painted to match your vehicle's color preferences.
Image: Four individual YITAMOTOR fender flares, showcasing ການອອກແບບຜະລິດຕະພັນ.
2. ເນື້ອໃນຊຸດ
ກວດສອບວ່າອົງປະກອບທັງຫມົດແມ່ນມີຢູ່ກ່ອນທີ່ຈະເລີ່ມຕົ້ນການຕິດຕັ້ງ:
- 1 x Fender Flares Kit (4 pieces: 2 front, 2 rear)
- 1 x Set of Mounting Hardware (including 304 stainless steel screws)
- 1 x ຄູ່ມືແນະນຳ (ເອກະສານນີ້)
3. ຂໍ້ມູນຈໍາເພາະຂອງຜະລິດຕະພັນ
| ຄຸນລັກສະນະ | ລາຍລະອຽດ |
|---|---|
| ຍີ່ຫໍ້ | YITAMOTOR |
| ໝາຍເລກຕົວແບບ | MAYIM2msJi |
| ວັດສະດຸ | ໂພລີໂພລີນ (PP) |
| ສໍາເລັດຮູບພາຍນອກ | ສີດໍາກ້ຽງ |
| ສີ | Black (Paintable) |
| ນ້ໍາຫນັກລາຍການ | 16.54 ປອນ |
| ຂະໜາດສິນຄ້າ (L x W x H) | 49.21 x 11.02 x 31.69 ນິ້ວ |
| ປະເພດພໍດີ | ພໍດີສະເພາະພາຫະນະ |
| ປະເພດການບໍລິການພາຫະນະ | 2019-2024 Chevy Silverado 1500 (Excl. 2019 LD) |
Image: Technical drawing illustrating the dimensions of the front and rear fender flares.
4. ຄູ່ມືການຕິດຕັ້ງ
Follow these steps for proper installation of your YITAMOTOR Fender Flares. No cutting is required for installation.
4.1. ການຕິດຕັ້ງກ່ອນ
- ກວດກາອົງປະກອບ: Unpack the fender flares and mounting hardware. Verify all parts are present and undamaged.
- Clean Vehicle Surface: Thoroughly clean the area around the wheel wells where the fender flares will be installed. Ensure surfaces are free of dirt, debris, and wax.
- ທົດສອບ Fit: Temporarily hold each fender flare against its corresponding wheel well to ensure proper alignment and fitment before permanent installation.
Image: A person bending a fender flare to show its flexible material, aiding in installation.
4.2. ຂະບວນການຕິດຕັ້ງ
- ຈັດຮຽງ ແລະຮັກສາຄວາມປອດໄພ: Position the fender flare onto the wheel well. The flares are designed with pre-drilled slots and holes that align with existing mounting points on your vehicle.
- ຕິດຕັ້ງຮາດແວ: Use the provided 304 stainless steel screws and other mounting hardware to secure the fender flares. Ensure all bolts are tightened securely but do not overtighten to avoid damaging the flares or vehicle.
- Repeat for All Flares: Follow the same procedure for installing the remaining three fender flares.
Image: A hand indicating the precise fitment of a fender flare on a truck's wheel well.
ຮູບພາບ: A close-up view of a bolt head securing the fender flare, highlighting the bolt-riveted design.
4.3. ຫຼັງຈາກການຕິດຕັ້ງ
After installation, double-check all mounting points to ensure the flares are securely attached and there are no loose components.
Image: A truck with YITAMOTOR fender flares installed, illustrating the 'no cutting installation' and the smooth black finish.
5. ການນໍາໃຊ້ແລະຄຸນສົມບັດ
The YITAMOTOR Fender Flares are designed to enhance your vehicle's appearance and provide practical benefits:
- Wheel Well Protection: Shields your wheel wells from mud, scratches, and other road debris, especially during off-road driving.
- ການກໍ່ສ້າງທົນທານ: Made from high-impact thermoplastic, resistant to extreme weather conditions, ensuring long-lasting performance.
- Paintable Surface: The smooth black coating allows for custom painting to match or complement your vehicle's color.
Image: A side-by-side comparison showing a truck's wheel well before and after fender flare installation, demonstrating protection from rust and damage.
Image: A fender flare being painted blue, illustrating the product's paintable surface for customization.
6. ບໍາລຸງຮັກສາ
To maintain the appearance and longevity of your fender flares:
- ທໍາຄວາມສະອາດປົກກະຕິ: Wash the fender flares regularly with mild soap and water to remove dirt, mud, and road grime.
- ຫຼີກເວັ້ນສານເຄມີທີ່ຮຸນແຮງ: Do not use abrasive cleaners or harsh chemicals that could damage the finish or material.
- ກວດສອບເປັນໄລຍະ: Periodically check the mounting hardware for tightness and ensure the flares remain securely attached.
Image: A person cleaning a fender flare on a truck with a pressure washer, demonstrating routine maintenance.
7. ການແກ້ໄຂບັນຫາ
ຖ້າທ່ານພົບບັນຫາໃດໆໃນລະຫວ່າງ ຫຼື ຫຼັງຈາກການຕິດຕັ້ງ, ໃຫ້ພິຈາລະນາດັ່ງຕໍ່ໄປນີ້:
- ວ່າງ: Ensure all mounting hardware is correctly installed and tightened. Re-check alignment.
- ຊິ້ນສ່ວນທີ່ຂາດຫາຍໄປ: Refer to the 'Package Contents' section. If parts are missing, contact YITAMOTOR customer support.
- ບັນຫາການຕິດຕັ້ງ: Double-check your vehicle's year, make, and model against the product's compatibility information.
8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information or technical assistance, please refer to the official YITAMOTOR webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.
