1. ບົດແນະນຳ
Thank you for choosing the Montech Titan PLA 850W ATX Gaming Power Supply. This manual provides essential information for the proper installation, operation, and maintenance of your power supply unit (PSU). Please read this manual thoroughly before installation and retain it for future reference.
2. ຂໍ້ມູນຄວາມປອດໄພ
WARNING: Improper installation or use can lead to equipment damage, electric shock, or serious injury. Always follow these safety guidelines:
- Ensure the power supply is disconnected from the AC power outlet before installation, removal, or any maintenance.
- This product is designed for indoor use only. Do not expose it to moisture, high temperatures, or dusty environments.
- ຢ່າເປີດ PSU casing. ສູງ voltages are present inside, and opening the unit will void the warranty.
- Use only the modular cables provided with this power supply. Using third-party cables may cause damage to the PSU or connected components.
- Ensure proper grounding for your computer system.
- ຖ້າທ່ານບໍ່ແນ່ໃຈກ່ຽວກັບຂັ້ນຕອນການຕິດຕັ້ງໃດໆ, ໃຫ້ປຶກສາກັບນັກວິຊາການທີ່ມີຄຸນວຸດທິ.
3. ເນື້ອໃນຊຸດ
ກວດສອບວ່າລາຍການທັງຫມົດແມ່ນມີຢູ່ໃນຊຸດຂອງທ່ານ:
- Montech Titan PLA 850W Power Supply Unit
- Modular Cable Set (including ATX 24-pin, CPU 8-pin, PCIe 6+2-pin, SATA, Peripheral 4-pin)
- ສາຍໄຟ AC
- screws ການຕິດຕັ້ງ
- ສາຍເຄເບີ້ນ
- ຄູ່ມືຜູ້ໃຊ້
4. ຜະລິດຕະພັນເກີນview
The Montech Titan PLA 850W is a high-performance, fully modular power supply designed for gaming and high-end PC systems. It features 80 Plus Platinum and Cybenetics Platinum certifications for exceptional efficiency, ATX 3.1 and PCIe 5.1 readiness for next-generation components, and a silent 135mm Fluid Dynamic Bearing (FDB) fan with a Zero RPM mode.
ຮູບພາບ: ມຸມ view of the Montech Titan PLA 850W Power Supply, showcasing its white chassis and top fan grill.
ຮູບພາບ: ຫຼາຍກວ່າview of key features including 80 PLUS Platinum, Cybenetics A+ certification, ATX 3.1 & PCIe 5.1 readiness, silent performance, premium build, and ultimate protection.
4.1 ລັກສະນະທີ່ສໍາຄັນ
- 80 PLUS Platinum & Cybenetics Platinum Certified: Achieves up to 90% efficiency, reducing heat and operating costs.
- ATX 3.1 ແລະ PCIe 5.1 ພ້ອມແລ້ວ: Fully compliant with the latest power standards for modern GPUs, supporting 2x total power excursion and 3x GPU power excursion.
- ການອອກແບບ Modular ຢ່າງເຕັມສ່ວນ: Allows for clean cable management and improved airflow within your PC case.
- 135mm FDB Silent Fan with Zero RPM Mode: Ensures quiet operation under low to moderate loads by stopping the fan.
- 100% Japanese 105°C Capacitors: Provides enhanced durability, stability, and reliability.
- ການປົກປ້ອງທີ່ສົມບູນແບບ: Includes OVP, OPP, SCP, OCP, UVP, OTP for system safety.
Image: Diagram illustrating ATX 3.1 and PCIe 5.1 readiness, showing support for power and GPU excursions and hold time above 21ms.
Image: Logos for 80 PLUS Platinum and Cybenetics Platinum certifications, indicating high power efficiency.
ຮູບພາບ: ໃກ້ຊິດ view of internal Japanese 105°C capacitors, highlighting premium component quality.
Image: Cybenetics A+ certification logo alongside a view of the 135mm FDB fan, emphasizing silent operation.
5. ຄໍາແນະນໍາການຕິດຕັ້ງ
5.1 ລາຍການກວດກ່ອນການຕິດຕັ້ງ
- Ensure your computer case is compatible with ATX power supplies.
- Gather all necessary tools: screwdriver, cable ties (included).
- Unpack the PSU and all modular cables.
5.2 ການຕິດຕັ້ງທາງດ້ານຮ່າງກາຍ
- ປິດຄອມພິວເຕີຂອງທ່ານ ແລະ ຖອດສາຍໄຟ AC ອອກຈາກປລັກສຽບທີ່ຝາ.
- ເປີດກໍລະນີຄອມພິວເຕີຂອງທ່ານ.
- Carefully place the Montech Titan PLA 850W PSU into the designated PSU bay in your computer case. Ensure the fan is facing the correct direction (typically facing down if your case has a bottom vent, or up if it draws air from inside the case).
- ຮັບປະກັນ PSU ກັບກໍລະນີໂດຍໃຊ້ screws mounting ສະຫນອງໃຫ້.
5.3 ການເຊື່ອມຕໍ່ສາຍ
The Montech Titan PLA 850W is a fully modular power supply, allowing you to connect only the cables you need. Refer to the diagram below for connector types and locations.
ຮູບພາບ: ດ້ານຫລັງ view of the Montech Titan PLA power supply showing the fully modular cable connection ports, labeled for M/B, CPU/PCI-E, Peripheral-IDE/SATA/Molex, and 12V-2x6.
- Motherboard (M/B) Power: Connect the 24-pin ATX cable to the PSU and then to your motherboard's 24-pin connector.
- ພະລັງງານ CPU: Connect the 8-pin (4+4-pin) CPU cable(s) to the PSU and then to your motherboard's CPU power connector(s).
- ພະລັງງານ PCIe: Connect the 6+2-pin PCIe cable(s) to the PSU and then to your graphics card(s). Use separate cables for each high-power GPU connector if possible.
- ພະລັງງານ SATA: Connect SATA power cables to the PSU and then to your SSDs, HDDs, or optical drives.
- Peripheral (Molex) Power: Connect peripheral cables to the PSU and then to any components requiring Molex connectors.
- Once all necessary cables are connected, use cable ties to manage them neatly for better airflow and aesthetics.
5.4 ການເປີດເຄື່ອງເບື້ອງຕົ້ນ
- ໃຫ້ແນ່ໃຈວ່າການເຊື່ອມຕໍ່ທັງຫມົດແມ່ນປອດໄພ.
- ປິດກໍລະນີຄອມພິວເຕີຂອງທ່ານ.
- Connect the AC power cord to the PSU's input socket and then to a wall outlet.
- ເລື່ອນສະວິດໄຟຢູ່ດ້ານຫຼັງຂອງ PSU ໄປທີ່ຕຳແໜ່ງ 'ON' (I).
- ເປີດຄອມພິວເຕີຂອງທ່ານ.
Image: Rear panel of the Montech Titan PLA 850W Power Supply, showing the AC input, power switch, and input voltage label (100~240VAC).
6. ຄໍາແນະນໍາການດໍາເນີນງານ
6.1 ການເປີດ/ປິດ
To power on your system, ensure the PSU switch is in the 'ON' position and press your computer's power button. To power off, shut down your operating system normally. For complete power disconnection, flip the PSU switch to the 'OFF' (O) position and unplug the AC cord.
6.2 ໂໝດ Zero RPM
The Montech Titan PLA 850W features a Zero RPM mode. In this mode, the PSU fan will remain off under low to moderate loads to provide silent operation. The fan will automatically activate when the load increases to maintain optimal temperatures. This is normal operation and not an indication of a fault.
ຮູບພາບ: ເທິງລົງລຸ່ມ view of the Montech Titan PLA 850W Power Supply fan, visible through the protective grill.
7. ບໍາລຸງຮັກສາ
To ensure the longevity and optimal performance of your Montech Titan PLA 850W PSU, follow these maintenance guidelines:
- ການກຳຈັດຂີ້ຝຸ່ນ: Periodically clean the exterior of the PSU and the fan grill to prevent dust buildup. Use compressed air to gently clear dust from the fan blades and internal components. Always disconnect the AC power before cleaning.
- ເງື່ອນໄຂສິ່ງແວດລ້ອມ: Operate the PSU in a well-ventilated area, away from direct sunlight, heat sources, and excessive humidity.
- ການກວດສອບສາຍ: Occasionally check all modular cable connections to ensure they are secure and free from damage.
8. ການແກ້ໄຂບັນຫາ
If you encounter issues with your Montech Titan PLA 850W PSU, refer to the following common problems and solutions:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ລະບົບບໍ່ເປີດ. | AC power cord disconnected. ສະວິດ PSU ປິດຢູ່. ການເຊື່ອມຕໍ່ສາຍເຄເບີ້ນວ່າງ. ອົງປະກອບທີ່ຜິດພາດ. | ກວດໃຫ້ແນ່ໃຈວ່າໄດ້ສຽບສາຍໄຟ AC ຢ່າງປອດໄພ. Flip PSU switch to 'ON' (I). Check all modular cable connections. Test PSU with a PSU tester (if available) or try minimal components. |
| System powers on but is unstable/shuts down. | ໂຫຼດເກີນ. ຮ້ອນເກີນໄປ. ອົງປະກອບທີ່ຜິດພາດ. | ຮັບປະກັນຄວາມທົນທານຂອງລະບົບທັງໝົດtage ບໍ່ເກີນ 850W. Check for proper case ventilation and dust buildup. ກວດສອບວ່າອົງປະກອບທັງໝົດຖືກຕິດຕັ້ງຢ່າງຖືກຕ້ອງ. |
| ພັດລົມ PSU ບໍ່ໄດ້ຫມຸນ. | Zero RPM mode active. ການຂັດຂວາງພັດລົມ. ພັດລົມຜິດ. | This is normal under low loads. The fan will spin up when needed. Check for any obstructions. Clean dust if necessary. If fan never spins under load, contact support. |
If the problem persists after attempting these solutions, please contact Montech customer support for further assistance.
9. ຂໍ້ມູນຈໍາເພາະ
Detailed specifications for the Montech Titan PLA 850W Power Supply:
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ຊື່ຕົວແບບ | TITAN PLA 850W |
| ວັດtage | 850 ວັດ |
| ການຢັ້ງຢືນປະສິດທິພາບ | 80 PLUS Platinum, Cybenetics Platinum |
| ປັດໄຈແບບຟອມ | ATX |
| ຂະໜາດ (L x W x H) | 6.3 x 5.91 x 3.39 ນິ້ວ (160 x 150 x 86 ມມ) |
| ປະເພດພັດລົມ | 135mm Fluid Dynamic Bearing (FDB) |
| ຕົວເກັບປະຈຸ | 100% Japanese 105°C |
| ໂມດູລາ | Modular ຢ່າງເຕັມສ່ວນ |
| ມາດຕະຖານ ATX | ATX 3.1 |
| ມາດຕະຖານ PCIe | PCIe 5.1 |
| ການປົກປ້ອງ | OVP, OPP, SCP, OCP, UVP, OTP |
| ການປ້ອນຂໍ້ມູນ Voltage | 100-240VAC |
Image: Rating label of a Montech Titan PLA power supply (750W variant shown), detailing AC input and DC output specifications.
10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
The Montech Titan PLA 850W Power Supply is backed by a ການຮັບປະກັນຂອງຜູ້ຜະລິດ 10 ປີ, covering defects in materials and workmanship under normal use. For warranty claims or technical support, please visit the official Montech webເວັບໄຊ ຫຼືຕິດຕໍ່ພະແນກບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮັບປະກັນຄວາມຖືກຕ້ອງ.
For the most up-to-date support information, please refer to the official Montech support channels.
