ຄໍາແນະນໍາຄວາມປອດໄພທີ່ສໍາຄັນ
ກະລຸນາອ່ານຄໍາແນະນໍາທັງຫມົດຢ່າງລະອຽດກ່ອນທີ່ຈະນໍາໃຊ້ຜະລິດຕະພັນນີ້. ຮັກສາຄູ່ມືນີ້ໄວ້ສໍາລັບການອ້າງອີງໃນອະນາຄົດ.
- ຫ້າມບໍ່ໃຫ້ອຸປະກອນຖືກຝົນ, ຄວາມຊຸ່ມຊື່ນ, ຫຼືອຸນຫະພູມທີ່ຮຸນແຮງ.
- ຮັບປະກັນການລະບາຍອາກາດທີ່ເໝາະສົມອ້ອມຮອບເຄື່ອງ. ຢ່າປິດກັ້ນຊ່ອງລະບາຍອາກາດໃດໆ.
- ໃຊ້ພຽງແຕ່ໄຟລ໌ແນບ/ອຸປະກອນເສີມທີ່ລະບຸໂດຍຜູ້ຜະລິດ.
- ຖອດປລັກເຄື່ອງໃນເວລາມີພາຍຸຟ້າຜ່າ ຫຼືເມື່ອບໍ່ໄດ້ໃຊ້ເປັນເວລາດົນນານ.
- ອ້າງອີງການບໍລິການທັງໝົດໃຫ້ກັບພະນັກງານບໍລິການທີ່ມີຄຸນວຸດທິ.
- ຢ່າພະຍາຍາມຖອດປະກອບຫຼືດັດແປງຫນ່ວຍງານ.
ແນະນຳ
The 1byone LP03A All-in-One Record Player offers a high-fidelity vinyl listening experience with integrated features for modern connectivity. This belt-drive turntable includes built-in stereo speakers, a magnetic AT-3600L cartridge, and a built-in preamplifier. It also supports wireless audio input via Bluetooth 5.4 and wired connections through an Aux-in port and RCA line output.
Figure 1: The 1byone LP03A All-in-One Record Player.
ເນື້ອໃນຊຸດ
ກວດສອບວ່າລາຍການທັງຫມົດທີ່ລະບຸໄວ້ຂ້າງລຸ່ມນີ້ແມ່ນລວມຢູ່ໃນຊຸດຂອງທ່ານ:
- 1byone LP03A Record Player Unit
- ການປົກຫຸ້ມຂອງຝຸ່ນ
- Platter with Drive Belt (pre-installed or separate)
- ນ້ຳໜັກໂຕ
- ນ້ຳໜັກຕ້ານສະເກັດ
- Power Adapter
- ຄູ່ມືການສອນ
ສິນຄ້າເກີນview
Familiarize yourself with the components and controls of your record player.
ດ້ານໜ້າ ແລະ ທາງເທິງ View
ຮູບ 2: ດ້ານຫນ້າແລະດ້ານເທິງ View of the Record Player.
- ຈານ: ຮອງຮັບບັນທຶກໄວນິລ.
- ໂຕນ: ຖື cartridge ແລະ stylus.
- Cartridge (AT-3600L): ອ່ານຮ່ອງຂອງບັນທຶກ.
- ນ້ ຳ ໜັກ: ດຸ່ນດ່ຽງສຽງໂທນອາມ ແລະ ປັບກຳລັງຕິດຕາມ.
- Anti-skate Weight: Prevents the tonearm from drifting inward.
- ຕົວເລືອກຄວາມໄວ: Switches between 33 1/3 and 45 RPM.
- Volume/Mode Knob: Controls volume and selects input mode (Phono, Bluetooth, Aux).
- ລຳໂພງໃນຕົວ: ຜົນຜະລິດສຽງປະສົມປະສານ.
- ການປົກຫຸ້ມຂອງຝຸ່ນ: Protects the platter and tonearm from dust.
ການເຊື່ອມຕໍ່ແຜງດ້ານຫລັງ
ຮູບທີ 3: ການເຊື່ອມຕໍ່ແຜງດ້ານຫຼັງ.
- Phono/Line-Out Switch: Selects between Phono (unpreamplified) and Line (preamplified) output for RCA jacks.
- RCA Jacks (R-RCA-L): ສໍາລັບການເຊື່ອມຕໍ່ກັບພາຍນອກ amplifier ຫຼືລໍາໂພງພະລັງງານ.
- AUX ໃນ Jack: ສໍາລັບການເຊື່ອມຕໍ່ອຸປະກອນສຽງພາຍນອກຜ່ານສາຍ 3.5mm.
- ສະຖານີດິນ: For connecting a ground wire to an external amplifier ເພື່ອຫຼຸດຜ່ອນ hum.
- ການປັບລະດັບສຽງ: ປັບຄວາມໄວໃນການຫຼິ້ນຄືນ.
- DC ໃນ 12V: ພະລັງງານເຂົ້າສຳລັບອະແດບເຕີທີ່ໃຫ້ມາ.
Volume/Mode Knob
Figure 4: Volume and Mode Knobs.
ຕັ້ງຄ່າ
Follow these steps to set up your record player for the first time.
1. ການຕິດຕັ້ງແຜ່ນ ແລະສາຍແອວ
Figure 5: Platter Spindle and Motor Pulley.
- Carefully place the platter onto the center spindle.
- Locate the drive belt (usually pre-installed under the platter or in the packaging).
- If not pre-installed, gently stretch the drive belt around the motor pulley and the inner rim of the platter. Ensure the belt is flat and not twisted.
2. Cartridge and Stylus
The 1byone LP03A comes with a pre-installed Audio-Technica AT-3600L magnetic cartridge. Ensure the stylus guard is removed before playback.
Figure 6: Audio-Technica AT-3600L Cartridge.
3. Tonearm Balance and Tracking Force Adjustment
Properly balancing the tonearm and setting the tracking force is crucial for optimal sound quality and to prevent damage to your records and stylus.
Figure 7: Adjustable Counterweight.
- Zero Balance the Tonearm:
- Place the record player on a level surface.
- ເອົາຕົວປ້ອງກັນສະໄຕລັດອອກ.
- Lower the tonearm lift lever.
- Gently release the tonearm clamp.
- Rotate the counterweight at the rear of the tonearm until the tonearm is perfectly balanced horizontally, floating freely.
- ກໍານົດກໍາລັງຕິດຕາມ:
- Once balanced, hold the counterweight steady with one hand and rotate only the numbered ring on the front of the counterweight until '0' aligns with the center line on the tonearm.
- Rotate the entire counterweight (including the numbered ring) counter-clockwise until the desired tracking force is reached. For the AT-3600L cartridge, the recommended tracking force is typically 3.5 grams.
4. Anti-skate Adjustment
The anti-skate mechanism prevents the tonearm from being pulled towards the center of the record. Attach the anti-skate weight's loop to the second groove of the anti-skate post for the recommended setting.
5. ການຕິດຕັ້ງຝາປິດກັນຝຸ່ນ
Insert the hinges of the dust cover into the corresponding slots on the rear of the record player.
6. ການເຊື່ອມຕໍ່ພະລັງງານ
Connect the power adapter to the DC IN 12V port on the rear panel of the record player, then plug it into a wall outlet.
ການດໍາເນີນງານ
ຫຼີ້ນບັນທຶກ Vinyl
- ເອົາບັນທຶກໃສ່ແຜ່ນ.
- Select the appropriate speed (33 1/3 or 45 RPM) using the speed selector switch.
- Ensure the stylus guard is removed.
- ຍົກ tonearm ໂດຍໃຊ້ lever ຍົກ tonearm.
- Manually position the tonearm over the desired track of the record.
- Gently lower the tonearm using the lift lever. The stylus will make contact with the record and playback will begin.
- Adjust the volume using the Volume/Mode knob.
- To stop playback, lift the tonearm, return it to the tonearm rest, and secure it with the clamp.
ການປ້ອນຂໍ້ມູນ Bluetooth
The record player can receive audio wirelessly from Bluetooth-enabled devices.
Figure 8: Wireless Bluetooth Input.
- ເປີດເຄື່ອງຫຼິ້ນແຜ່ນສຽງ.
- Rotate the Volume/Mode knob to select Bluetooth mode (indicated by a blue LED).
- Enable Bluetooth on your smartphone, tablet, or computer and search for "1byone LP03A".
- Select the device to pair. Once connected, you can stream audio to the record player's built-in speakers.
ການເຊື່ອມຕໍ່ Aux-in
Connect external audio sources using a 3.5mm audio cable to the AUX IN jack on the rear panel.
- Connect one end of a 3.5mm audio cable to your external device (e.g., MP3 player).
- Connect the other end to the AUX IN jack on the record player.
- Rotate the Volume/Mode knob to select Aux-in mode.
- Adjust volume from both the record player and the external device.
RCA Line Out ການເຊື່ອມຕໍ່
Use the RCA Line Out to connect the record player to an external amplifier ຫຼືລໍາໂພງພະລັງງານ.
- Determine if your external amplifier has a dedicated PHONO input.
- ຖ້າເຈົ້າ amplifier has a PHONO input, set the Phono/Line-Out switch on the record player's rear panel to ເບີໂທລະສັບ. Connect the RCA cables from the record player to the PHONO input of your amplifier. Connect a ground wire from the record player's ground terminal to your ampສະຖານີດິນຂອງ lifier ຖ້າມີ.
- ຖ້າເຈົ້າ amplifier ເຮັດ ບໍ່ແມ່ນ have a PHONO input, set the Phono/Line-Out switch on the record player's rear panel to ເສັ້ນ. Connect the RCA cables from the record player to any standard LINE input (e.g., AUX, CD, TAPE) on your ampມີຊີວິດຊີວາ.
- ປັບລະດັບສຽງຢູ່ອຸປະກອນພາຍນອກຂອງທ່ານ amplifier. The record player's internal volume control will not affect the RCA output.
ການປັບລະດັບສຽງ
The Pitch Adjust knob on the rear panel allows for fine-tuning the playback speed. Rotate it slightly to increase or decrease the speed as needed.
ບໍາລຸງຮັກສາ
Regular maintenance ensures the longevity and optimal performance of your record player.
ການອະນາໄມສະໄຕລັດ
- Always clean the stylus from back to front using a soft brush designed for stylus cleaning.
- Do not use excessive force or clean from side to side, as this can damage the stylus.
- Replace the stylus when signs of wear are visible (e.g., distorted sound, skipping).
ເຮັດຄວາມສະອາດ Turntable ໄດ້
- ເຊັດເຄື່ອງດ້ວຍຜ້າອ່ອນ, ແຫ້ງ.
- Do not use harsh chemicals, cleaning solvents, or abrasive cleaners.
- Keep the platter and tonearm free of dust and debris.
ການດູແລປົກປິດຝຸ່ນ
Clean the dust cover with a soft, lint-free cloth. Avoid using abrasive materials that could scratch the surface.
ການແກ້ໄຂບັນຫາ
ອ້າງອີງໃສ່ພາກນີ້ສໍາລັບບັນຫາທົ່ວໄປແລະການແກ້ໄຂຂອງພວກເຂົາ.
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ບໍ່ມີພະລັງງານ | ອະແດບເຕີພະລັງງານບໍ່ໄດ້ເຊື່ອມຕໍ່; ປ່ຽງບໍ່ເຮັດວຽກ. | ໃຫ້ແນ່ໃຈວ່າອະແດບເຕີໄຟຟ້າໄດ້ເຊື່ອມຕໍ່ຢ່າງແໜ້ນໜາ ແລະ ສຽບເຂົ້າກັບປລັກສຽບທີ່ໃຊ້ໄດ້. |
| ບໍ່ມີສຽງຈາກ ລຳ ໂພງ | Volume too low; incorrect input mode selected; stylus guard still on. | Increase volume; select correct input mode (Phono for records); remove stylus guard. |
| ສຽງບິດເບືອນ ຫຼື ສຽງຂ້າມ | Stylus dirty or worn; tracking force incorrect; record dirty or damaged; turntable not level. | Clean or replace stylus; re-adjust tracking force; clean record; ensure turntable is on a level surface. |
| ສຽງດັງ | Ground wire not connected (if using external preamp); interference. | Connect ground wire to external amplifier; move unit away from other electronic devices. |
| Bluetooth ບໍ່ເຊື່ອມຕໍ່ | Record player not in Bluetooth mode; device too far; device already connected to another unit. | Ensure record player is in Bluetooth mode; move device closer; disconnect from other devices. |
ຂໍ້ມູນຈໍາເພາະ
Technical specifications for the 1byone LP03A Record Player.
- ຕົວແບບ: LP03A
- ປະເພດໄດ: ຂັບເຂັມຂັດ
- ຄວາມໄວ: 33 1/3, 45 RPM
- ໄສ້ຕອງ: Audio-Technica AT-3600L (Magnetic)
- ການກໍ່ສ້າງໃນທາງສ່ວນຫນ້າຂອງampມີຊີວິດຊີວາ: ແມ່ນແລ້ວ
- ລໍາໂພງ: ລຳໂພງສະເຕຣິໂອໃນຕົວ
- ການເຊື່ອມຕໍ່ແບບໄຮ້ສາຍ: Bluetooth 5.4
- ວັດສະດຸປ້ອນ: Aux-in (3.5 ມມ)
- ຜົນໄດ້ຮັບ: RCA Line Out (Switchable Phono/Line)
- ການສະຫນອງພະລັງງານ: DC 12V
- ຂະໜາດ (ປະມານ): 17.32 x 14.09 x 7.4 ນິ້ວ (L x W x H)
- ນ້ຳໜັກ (ປະມານ): 17.16 ປອນ
ຮູບທີ 9: ຂະໜາດຜະລິດຕະພັນ.
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Your 1byone LP03A Record Player is covered by a comprehensive warranty and return policy.
- ການຮັບປະກັນ: 36 ເດືອນ
- ນະໂຍບາຍການສົ່ງຄືນ: 90 ມື້
- ການຊ່ວຍເຫຼືອລູກຄ້າ: ສໍາລັບການຊ່ວຍເຫຼືອ, ກະລຸນາຕິດຕໍ່ພວກເຮົາທີ່ ushelp@1byonebros.com.
